Industrial Clays
Mostrando 1-12 de 19 artigos, teses e dissertações.
-
1. Simple and fast process using hydrochloric acid for producing synthetic zinc-rich stevensite
Abstract In the last decades, clays have been used in sectors such as health and cosmetics. This requires products that are increasingly pure and present homogeneous properties, hardly found in natural clays. The use of synthetic clays can be a solution. For this, it is necessary to explore techniques for their production. The main focus of this study was to
Cerâmica. Publicado em: 2022
-
2. Caracterização de argilas de novos jazimentos situados em Parelhas/RN, Brasil, visando aplicação na indústria cerâmica
RESUMO O Estado do Rio Grande do Norte, mais especificamente no município de Parelhas, Brasil, a indústria cerâmica já é bastante consolidada, crescendo ano após ano. Entretanto, o estímulo do setor tem provocado acelerada exaustão das jazidas de argilas locais utilizadas pela indústria e, por conseguinte, ameaçando a manutenção da indústria cer
Matéria (Rio J.). Publicado em: 10/06/2019
-
3. Hydrometallurgical extraction of Al and Si from kaolinitic clays
Abstract Herein is presented the results of a study on the hydrometallurgic extraction and recovery of aluminum and silicon by leaching of kaolinitic clays with HF. The studied extraction parameters were: temperature, reaction time, solid/liquid ratio, concentration, and precipitating agent mass. In the leaching process, mineral dissolutions near 100% were o
REM, Int. Eng. J.. Publicado em: 2017-12
-
4. Characterization and Evaluation of Ceramic Properties with Spherical and Prismatic Samples of Clay Used in Red Ceramics
The Brazilian red ceramic industry monthly consumes about 10.3 million tons of clay, its main raw material. In most potteries, characterization of the clay is made empirically, which can result in roof tiles and blocks not according to standards. In this sense, this paper aims to characterize clays used in the manufacturing of red ceramic products in a facto
Mat. Res.. Publicado em: 09/11/2017
-
5. Incorporation of in Natura and Calcined Red Muds into Clay Ceramic
Brazil is one of the world greatest aluminum producer and also comprises a large industrial sector dedicated to the production of alumina (Al2O3) by the traditional Bayer process. During this process an insoluble residue, known as red-mud, is generated and normally discarded. A possible use for the red mud is its incorporation into clay ceramics. Indeed, thi
Mat. Res.. Publicado em: 23/10/2015
-
6. Acid treatments of montmorillonite-rich clay for Fe removal using a factorial design method
Montmorillonite clays are of great interest for industrial processes such as catalysis and adsorption. The textural properties of clays can be modified in an attempt to increase their uses. This paper describes the acid treatment of natural montmorillonite clay. The materials were characterized using X-ray diffraction (XRD), atomic absorption spectroscopy (A
Mat. Res.. Publicado em: 16/07/2013
-
7. Influence of processing variables on the mechanical behavior of HDPE/clay nanocomposites
Nanocomposites were processed using the technique of melt intercalation, starting from a concentrated polar compatibilizer/organoclay (PE-g-MA/organoclay) prepared in an internal mixer. The concentrate was incorporated into the matrix of HDPE by two methods: I) counter-rotating twin-screw extruder and II) co-rotating twin-screw extruder, using two screw prof
Materials Research. Publicado em: 31/05/2012
-
8. Contribuição ao estudo das bentonitas do município de Boa Vista Estado da Paraíba. / Contribution to the study of bentonite in Boa Vista state of Paraíba.
The clays are composed of clay minerals and accessory minerals, whose crystal structure allows the adsorption of cations giving them particular physical and chemical properties. Chemically, the argilomineriais are formed mainly of hydrated silicates of aluminum, iron and magnesium. The bentonites are special types of industrial clays because submitting more
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/05/2011
-
9. Caracterização e avaliação de argilas como adsorventes na remoção e eluição de íons cobre e mercúrio em diferentes sistemas / Characterization and evaluation of clays as adsorbents in removal and elution of copper and mercury ions in different systems
A remoção de metais pesados por argilas, baseada na tecnologia de purificação da água, tem sido investigada como uma alternativa aos métodos tradicionais. Argilas do tipo esmectítico são as de maior utilização industrial, sendo considerada a mais interessante das argilas industriais. Todavia em diversos casos faz-se necessário submetê-las a trata
Publicado em: 2011
-
10. Caracterização de matérias-primas regionais e desenvolvimento de formulações de massas cerâmicas para porcelanato
Initially concentrated in some poles at the South and Southeast regions of Brazil, the ceramic tiles industry became wide during the 80s decade, with a disconcentration industrial and regional pulverization. The competitiveness in the ceramic tiles internal and external consumers markets, it has debtor the industries to invest in sophisticated products each
Publicado em: 2009
-
11. CARACTERIZAÇÃO TECNOLÓGICA DAS ARGILAS DA PENÍNSULA DE SANTA ELENA, EQUADOR: VIABILIDADE DE SUAS UTILIZAÇÕES INDUSTRIAIS
Clays of the Santa Elena Peninsula located to the southwest of the coast of Ecuador have been studied in order to identify its main physical, chemical and mineralogical characteristics, as well as the main mineral contained in these clays. One hundred eighty eight points were searched and forty and two samples were collected, being representative of the six
Publicado em: 2008
-
12. Avaliação da potencialidade de argilas de queima clara como matérias-primas para o desenvolvimento de novos produtos cerâmicos
The industries of structural ceramics are among the most important production chains in the state of Rio Grande do Norte. The industry and other interest groups to target the replacement of firewood by natural gas. Studies accordingly concluded that simple change does not guarantee products of superior quality, and that the increase in spending on fuel can e
Publicado em: 2008