Impedance Spectroscopy
Mostrando 13-24 de 282 artigos, teses e dissertações.
-
13. Changes within the care of hematopoietic cell transplantation patients after the shift of a Mexican institution to a COVID-19-only center
A new methodology using gas-diffusion microextraction (GDME) was developed for the analysis of volatile corrosion inhibitors (VCIs). The evaluation of the inhibition efficiency and corrosion rate (ν) was performed by NaCl deliquescence tests and correlated with measurements of polarization resistance (Rp) obtained from electrochemical impedance spectroscopy
Hematol., Transfus. Cell Ther.. Publicado em: 2020-10
-
14. Aqueous Extracts of the Castor Beans as a Corrosion Inhibitor of Mild Steel in HCl Media
The present work studied aqueous extracts of castor beans as a natural inhibitor of the corrosion of mild steel in 1 M HCl using gravimetric tests, potentiodynamic polarization curves, linear polarization method, electrochemical impedance measurements, surface analysis by scanning electron microscopy (SEM) and chemical characterization by Fourier transform i
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
15. PMMA-SiO2 Organic-Inorganic Hybrid Coating Application to Ti-6Al-4V Alloy Prepared through the Sol-Gel Method
Siloxane-poly(methyl methacrylate) (PMMA) hybrid was synthesized based on the sol-gel method and applied to Ti-6Al-4V through dip-coating. The structural feature of the hybrid was subjected to Fourier-transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TG); its morphological properties were analyzed through scanning electron microscope (SE
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
16. Effect of Etching Temperature on Surface Properties of Ti6Al4V Alloy for Use in Biomedical Applications
The objective of this study is to evaluate the surface physicochemical properties of Ti6Al4V alloy after etching with a piranha’s solution at temperatures of 25 °C, 40 °C, and 60 °C for 30 min. Scanning electron microscopy with energy-dispersive X-ray spectroscopy, optical profilometry, X-ray diffraction, and wettability analyses were used to characteri
Mat. Res.. Publicado em: 10/01/2020
-
17. Determination of Catechol and Hydroquinone by Using Perilla frutescens Activated Carbon Modified Glassy Carbon Electrode
High specific surface area activated carbon prepared by Perilla frutescens (PFHSAAC) was modified on the surface of the glassy carbon electrode (GCE) by drop-coating method to construct a PFHSAAC/GCE. The electrochemical properties of the modified electrode were investigated in detail by some electrochemical methods such as cyclic voltammetry (CV), different
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
18. Investigation of Physicochemical Characteristics of Heavy, Medium and Blend Crude Petroleum on Corrosion Resistance of AISI 1020 Carbon Steel
This work investigates the influence of the physicochemical characteristics of heavy (17.5 °API), medium (28.3 °API) and blend (50% heavy + 50% medium) crude petroleum on corrosion of AISI 1020 carbon steel at 25.0 ± 1.0°C. The corrosion resistance of steel was analyzed by electrochemical impedance spectroscopy, potentiodynamic polarization, and scanning
Mat. Res.. Publicado em: 05/12/2019
-
19. Utilização de casca de ovo como fonte alternativa de cálcio na obtenção de titanato de cálcio (CaTiO3)
RESUMO No presente trabalho, detalha-se o estudo do reaproveitamento da casca de ovo como fonte alternativa mineral de calcita na síntese de titanato de cálcio (CaTiO3). As matérias-primas foram caracterizadas por difração e fluorescência de raios X e as composições foram formuladas e sinterizadas em diferentes condições. Após a sinterização, as
Matéria (Rio J.). Publicado em: 25/11/2019
-
20. Caracterização de termistores automotivos do tipo NTC
RESUMO Os termistores automotivos são eletrocerâmicas com características sensoras alojadas em estojos metálicos fixadas no radiador, que têm como função controlar a temperatura da água de resfriamento do motor. O objetivo deste trabalho foi caracterizar dois termistores comerciais aplicados em veículos automotores. Os termistores caracterizados for
Matéria (Rio J.). Publicado em: 25/11/2019
-
21. Effect of High-pressure Torsion on Corrosion Behavior of a Solution-treated Al-Mg-Sc Alloy in a Saline Solution
The effect of the increase in crystalline defects in the structure generated by high-pressure torsion (HPT) on the corrosion behavior of metallic materials is not well understood. This report evaluates the influence of HPT on the corrosion behavior of a solution treated Al-3wt% Mg-0.2wt% Sc alloy in a 3.5 wt./v.% NaCl solution. The electrochemical behavior o
Mat. Res.. Publicado em: 04/11/2019
-
22. Nanoparticles of Fe2O3 and Co3O4 as Efficient Electrocatalysts for Oxygen Reduction Reaction in Acid Medium
This paper presents a comparative study about the oxygen reduction reaction (ORR) catalyzed by nanoparticles of Fe2O3 and Co3O4 applied on the surface of glassy carbon electrodes (GCE). The nanoparticles were synthesized using the modified polymeric precursor method (Pechini). These two nanomaterials were characterized by Fourier transform infrared spectrosc
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
23. Electrode Modified with the Ionic Liquid [P6,6,6,14+]2[MnCl42-] for the Determination of Bisphenol A in Plastic Samples
This paper describes a new and simple electrode for the determination of bisphenol A (BPA) in different plastic samples using carbon paste electrode (CPE) modified with a trihexyltetradecylphosphonium tetrachloromanganate(II) ([P6,6,6,14+]2[MnCl42-]) magnetic ionic liquid (MIL/CPE). Electrochemical characterization of MIL/CPE by cyclic voltammetry and electr
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
24. Study of behavior alloy Ti and 316L in to simulated body fluid by electrochemical techniques
ABSTRACT In this work, Ti-316L stainless steel was produced, and its electrochemical behavior was characterized. Ti-steel alloys were produced using an induction furnace, by mixing commercial Ti and 316L stainless steel. X-ray diffraction analyses showed the presence of both the materials, Ti and 316L, in the samples produced. The elemental composition of th
Matéria (Rio J.). Publicado em: 16/09/2019