Hydrothermal Method
Mostrando 1-12 de 87 artigos, teses e dissertações.
-
1. Synthesis and characterization of α-SnWO4 powders obtained by microwave-assisted hydrothermal method
Abstract The structural, morphological, and optical properties of α-SnWO4 synthesized by microwave-assisted hydrothermal method at 150 °C for different times were investigated. XRD revealed the formation of the orthorhombic phase, without the presence of a secondary phase. The sample processed for 64 min showed a reduction in unit cell volume, suggesting a
Cerâmica. Publicado em: 2022
-
2. A novel fluorescence sensor for the detection of chloride ion in artificial sweat and environmental water with nitrogen-doped graphene quantum dots
A new fluorescent detection route for chloride ion was designed with Nitrogen-doped graphene quantum dots (N-GQDs), which were prepared by a traditional hydrothermal method with citric acid as carbon source and urea as nitrogen source. The prepared N-GQDs solution was light yellow, and the freeze-dried solid was black. It emitted blue light under ultraviolet
Química Nova. Publicado em: 2022
-
3. PHOTODEGRADATION OF RhB UNDER VISIBLE LIGHT BY PT/TIO2 NANOPARTICLES PREPARED THROUGH PHOTOREDUCTIVE DEPOSITION PROCESS
Pt/TiO2 nanoparticles were prepared by a simple two-step aqueous solution method, which consists of a low temperature hydrothermal step and a photoreduction deposition step. The as-prepared samples were characterized by XRD, TEM, XPS, UV-vis, and BET techniques. The as-prepared samples exhibited enhanced photocatalytic activity towards the degradation of rho
Quím. Nova. Publicado em: 2021-03
-
4. New Proposal for Sugarcane Vinasse Treatment by Hydrothermal Carbonization: An Evaluation of Solid and Liquid Products
Vinasse is a residue of ethanol production from sugarcane. In view of the problems associated with its disposal, this study aimed to propose a treatment for vinasse by hydrothermal carbonization. The influence of temperature (100 to 200 ºC), acidity (1.7 to 8.3%) and reaction time (12 to 48 h) on the hydrothermal treatment was evaluated, as well the charact
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
5. Microwave Assisted Ultra-Fast Method to Synthesize Carbonate-Phosphates, Na3MCO3PO4 (M = Mn, Fe, Co, Ni) - Relevant Materials Applied in Sodium-Ion Batteries
Although largely used in mobiles and electric vehicles applications, insertion batteries based on Li-ion technology are high-cost devices. These applications require high-performance energy storage systems with high-energy and high-power densities, which are better attained by Li-ion technology. However, stationary applications such as power plants and unint
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
6. Hydrogen production from aqueous glycerol using titanate nanotubes decorated with Au nanoparticles as photocatalysts
Abstract: Protonated titanate nanotubes (HTiNts) were synthesized using the hydrothermal method, followed by proton exchange with acid. Gold nanoparticles decorated titanate nanotubes (AuHTiNts) were obtained by the reduction of AuCl4- under vigorous stirring with an aqueous solution of HTiNts containing 1 wt% of ascorbic acid. To investigate the surface str
An. Acad. Bras. Ciênc.. Publicado em: 28/11/2019
-
7. Synthesis and characterization of mesoporous materials with SBA and MCM structure types
Resumo Materiais mesoporosos são estruturas promissoras para aplicação em catálise e adsorção devido à elevada área superficial e grande tamanho dos poros. Materiais mesoporosos foram sintetizados pelo método hidrotérmico com novos surfactantes, distintos daqueles observados na literatura, a fim de realizar um estudo de sua estrutura e obter materi
Cerâmica. Publicado em: 14/11/2019
-
8. Use of Carbon Dots Synthesized from Citrate as a Fluorescent Probe for Quercetin Determination in Tea and Beer Samples
In this work, carbon dots (CDs) prepared by a one-step hydrothermal method were employed for the determination of quercetin in teas and beers. The fluorescence quenching of CDs was proportional to the concentration of quercetin. Under optimum experimental conditions, linear quenching was observed for quercetin in the range of 1.0 to 10 mg L-1 (F/F0 = (0.1511
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
9. Dielectric Behavior of α-Ag2WO4 and its Huge Dielectric Loss Tangent
The microwave-assisted hydrothermal method was used to obtain α-Ag2WO4. Rietveld refinement confirmed that α-Ag2WO4 is stable in the orthorhombic phase, without secondary phase. However, field-effect scanning electron microscope analysis showed that α-Ag2WO4 nanorods surfaces contain silver nanoparticles, confirmed by the X-ray photoelectron spectroscopy
Mat. Res.. Publicado em: 02/09/2019
-
10. Hydrothermal Synthesis to Water-stable Luminescent Carbon Dots from Acerola Fruit for Photoluminescent Composites Preparation and its Application as Sensors
Carbon dots (C-dots) possess the attractive properties of high stability, low toxicity, good water solubility, simple synthetic routes as well as size and excitation-dependent photoluminescence (PL).The aim of this work was to synthesize photoluminescent C-dots by hydrothermal method using acerola fruit (Malpighiaemarginata) as a row material, since this fru
Mat. Res.. Publicado em: 06/06/2019
-
11. Photoelectrodes with titanate nanotubes sensitized by mesoporphyrin derivative from cashew nut shell
ABSTRACT Titanate nanotubes (TiNTs) with the chemical composition Na2Ti3O7.nH2O (NaTiNT) were obtained through a hydrothermal method in highly alkaline medium. Protonated titanates nanotubes (H-TiNTs), with the composition H2Ti3O7.nH2O, were prepared by ion exchange reaction through a suspension of Na2Ti3OγnH2O nanotubes in HCl medium, promoting the exchang
Matéria (Rio J.). Publicado em: 20/05/2019
-
12. New Synthesis Method for a Core-Shell Composite Based on α-Bi2O3 @PPy and its Electrochemical Behavior as Supercapacitor Electrode
New composite based on polypyrrole (PPy) and bismuth oxide (α-Bi2O3) was investigated as supercapacitor electrode. The α-Bi2O3 was obtained by hydrothermal route at 500 ºC for 2 h. Cyclic voltammetry was used to electropolymerize PPy on graphite electrode (GE) or on GE/α-Bi2O3. The X-ray diffraction profile of Bi2O3 revealed the α-Bi2O3 monoclinic struc
J. Braz. Chem. Soc.. Publicado em: 2019-04