Hybrid Materials
Mostrando 1-12 de 200 artigos, teses e dissertações.
-
1. PREPARATION OF HYBRID POLYMERS AND USE AS CONTROLLED RELEASE DELIVERY VEHICLE FOR VOLATILE REPELLENT TO CONTROL Aedes aegypti
The Zika virus is a flavivirus spread by the Aedes aegypti mosquito, which also transmits dengue and chikungunya. Current forms of control include elimination of mosquito breeding sites, use of insecticides, repellents and other means. The present study developed new adsorbent materials based on silica and biomaterials capable of releasing an Aedes aegypti m
Quím. Nova. Publicado em: 2021-04
-
2. PROPRIEDADES DE PROTEÇÃO TÉRMICA DO CARBETO DE SILÍCIO EM REVESTIMENTOS CERÂMICOS
In recent years, research on the development of protective materials has expanded significantly in order to find efficient and economically viable solutions for application in various industrial segments. Among these materials, those aimed at protecting metallic substrates against high temperatures that end up causing corrosive processes, stand out due to th
Quím. Nova. Publicado em: 2021-01
-
3. Intercalation of Apocarotenoids from Annatto (Bixa orellana L.) into Layered Double Hydroxides
Synthetic conditions were evaluated to intercalate norbixin into layered double hydroxides (LDH). Norbixin was isolated from a hydrosoluble commercial annatto extract. LDH samples comprising M2+/Al3+ (M = Mg, Zn) were synthesized by coprecipitation and characterized by X-ray diffraction, thermal analysis coupled to mass spectrometry, vibrational spectroscopi
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
4. Performance eletrocatalítica frente a nitrito de um filme híbrido de fosfomolibdato e sílica organomodificada
RESUMO Materiais híbridos orgânico-inorgânicos nanoestruturados são produzidos com a finalidade de desenvolver e/ou aprimorar uma propriedade de interesse. Uma forma de obtenção de materiais híbridos é através da imobilização de um componente inorgânico em uma rede de sílica organicamente modificada (ormosil). Neste trabalho, um polioxometalato
Matéria (Rio J.). Publicado em: 25/11/2019
-
5. An augmented patient-specific approach to administration of contrast agent for CT renal angiography
ABSTRACT Purpose This hybrid retrospective and prospective study performed on 200 consecutive patients undergoing renal CTA, investigates the opacification of renal vasculature, radiation dose, and reader confidence. Materials and Methods 100 patients were assigned retrospectively to protocol A and the other 100 were allocated prospectively to protocol B
Int. braz j urol.. Publicado em: 07/11/2019
-
6. A randomized, prospective clinical study evaluating effectiveness of a bulk-fill composite resin, a conventional composite resin and a reinforced glass ionomer in Class II cavities: one-year results
Abstract Bulk-fill restorative materials such as bulk-fill composite resins and high viscous glass ionomer cements have become very popular materials in operative dentistry because their application is easy and time-saving. Objectives: The aim of this clinical study was to evaluate the clinical performance of a highly viscous reinforced glass ionomer materi
J. Appl. Oral Sci.. Publicado em: 07/10/2019
-
7. Evaluation of the resistance of trussed slabs with steel formwork in cold formed U profile
Abstract In the last decades, the modernization in structural engineering has increased the use of steel-concrete composite and hybrid systems for slabs, when the adherence in the interface of the materials is present or not, respectively. In addition to the traditional steel deck, a similar solution for precast trussed slabs has been used for small construc
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
8. COMPARATIVE STUDY OF TiO2 AND ZnO APPLICATION IN HYBRID SOLAR CELLS USING COPOLYMER P3OT/P3MT
Hybrid inorganic-organic solar cells are an attractive alternative energy source because of their low-cost production and ability to make use of a large amount of solar radiation available. This work aims to evaluate different solar cells composed of TiO2 and ZnO with P3OT/P3MT copolymer. Layers of semiconductor oxides were deposited on transparent fluorine-
Quím. Nova. Publicado em: 02/05/2019
-
9. Failure Theories on Carbon/Kevlar Hybrid Fabric Based Composite Laminate: Notch and Anisotropy Effects
Composite materials have been increasingly used in both researches and industries, given their wide range of innovative applications and configurations. High-performance hybrid fabric-reinforced plastics stand out in this sector. In the present research, an epoxy-based vinyl ester resin laminate reinforced with bidirectional hybrid fabric consisting of carbo
Mat. Res.. Publicado em: 25/04/2019
-
10. ON AN INTEGRATED DYNAMIC CHARACTERIZATION OF VISCOELASTIC MATERIALS BY FRACTIONAL DERIVATIVE AND GHM MODELS
Abstract The passive vibration control of mechanical systems under unwanted vibrations can be accomplished in a very effective way by using devices incorporating viscoelastic materials. The design of such devices requires a broad knowledge of the dynamic properties of the employed viscoelastic material, usually supplied by adequate mathematical models. Among
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
11. Mechanical behavior and water absorption in sisal/glass hybrid composites
ABSTRACT This study aimed to assess the effect of hybridization on thermomechanical properties and water absorption of composite materials, by introducing sisal fiber tissue into the material. To that end, two composite material plates were manufactured, the first with five layers of E-glass reinforcement mat and the second with three layers of E-glass fiber
Matéria (Rio J.). Publicado em: 06/12/2018
-
12. Influence of ceramic material, thickness of restoration and cement layer on stress distribution of occlusal veneers
Abstract The aim of this study was to evaluate stress distribution in an occlusal veneer according to the restorative material, restoration thickness, and cement layer thickness. A tridimensional model of a human maxillary first molar with an occlusal veneer preparation was constructed using a modeling software of finite element analysis. The model was repli
Braz. oral res.. Publicado em: 29/11/2018