High Temperature Mechanical Resistance
Mostrando 13-24 de 83 artigos, teses e dissertações.
-
13. Nondestructive Microstructural Characterization of Superduplex Stainless Steel by Double Loop Electrochemical Polarization Reactivation Portable Test
Superduplex stainless steels (SDSS) are frequently employed in the petrochemical industries where is required high mechanical strength, toughness, and corrosion resistance. However, these properties can be affected by deleterious phases formation due thermomechanical processes applied in the field during pipes and vessels construction. This work propose the
Mat. Res.. Publicado em: 23/10/2017
-
14. Microstructure and Mechanical Properties of Borided Inconel 625 Superalloy
ABSTRACT The Ni- based superalloy Inconel 625 is extensively used owing to its high strength, excellent fabricability, good weldability and outstanding resistance to high temperature corrosion against aggressive environments. However, despite its unique properties and extensive use, its wear resistance is in some cases unsatisfactory. In this study, Inconel
Matéria (Rio J.). Publicado em: 22/06/2017
-
15. High Temperature Erosion-oxidation Resistance of Thermally Sprayed Nanostructured Cr3C2-25(Ni-20Cr) Coatings
This study reports the high temperature erosion-oxidation (E-O) behavior of conventional and nanostructured Cr3C2-25(Ni-20Cr) coatings prepared by high velocity oxygen fuel (HVOF) spraying. As-received and nanostructured Cr3C2-25(Ni-20Cr) powders with mean crystallite sizes of 145 nm and 50 nm respectively, were used to prepare 120 - 200 µm thick coatings o
Mat. Res.. Publicado em: 25/05/2017
-
16. Influence of Austenitizing on the Mechanical Properties of Maraging 300 and Sae 4340 Steels - Comparative Study
Maraging steels with 18wt%Ni and 10wt%Co are precipitation hardenable steels selected for special applications. These steels are quenched and aged in the 480 - 600ºC range. Ti and Mo are added to precipitate during aging as fine Ni3(Ti,Mo) and Fe2Mo particles. Aging at high temperatures causes overaging due to coarsening of particles and austenite formation
Mat. Res.. Publicado em: 02/05/2017
-
17. Influence of Solution Annealing on Microstructure and Mechanical Properties of Maraging 300 Steel
Maraging 300 belongs to a family of metallic materials with extremely high mechanical strength and good toughness. Some works have been published about aging temperatures that improve ultimate strength resistance with acceptable toughness levels in this steel family, where the prior austenite grain size obtained by different solution annealing temperature in
Mat. Res.. Publicado em: 16/11/2016
-
18. Effect of Spun Velocities and Composition on the R‒phase and Thermomechanical Behavior in Ti‒Ni Ribbons Electrically Heated
This work deals with structural, electrical and mechanical characterization of Ti‒50.13Ni and Ti‒49.62Ni (at.%) shape memory alloys (SMAs) fabricated at different circumferential wheel velocities. The effect of wheel velocity, chemical composition and heat treatments are investigated. The characterization of crystallographic phases of the Ti‒Ni ribbons
Mat. Res.. Publicado em: 08/04/2016
-
19. Mechanical Characterization of Ti–12mo–13nb Alloy for Biomedical Application Hot Swaged and Aged
Beta titanium alloys were developed for biomedical applications due to the combination of its mechanical properties including low elasticity modulus, high strength, fatigue resistance, good ductility and with excellent corrosion resistance. With this perspective a metastable beta titanium alloy Ti-12Mo-13Nb was developed with the replacement of both vanadium
Mat. Res.. Publicado em: 23/10/2015
-
20. Production of MA956 Alloy Reinforced Aluminum Matrix Composites by Mechanical Alloying
Aluminum matrix composites (AMC) are attractive structural materials for automotive and aerospace applications. Lightweight, environmental resistance, high specific strength and stiffness, and good wear resistance are promising characteristics that encourage research and development activities in AMC in order to extend their applications. Powder metallurgy t
Mat. Res.. Publicado em: 23/10/2015
-
21. Martensitic Stainless Steels Low-temperature Nitriding: Dependence of Substrate Composition
Low-temperature plasma assisted nitriding is a very promising technique to improve surface mechanical properties of stainless steels, keeping unaltered or even improving their surface corrosion resistance. During treatment, nitrogen diffuses into the steel surface, increasing its hardness and wear resistance. In the present work the nitriding process of diff
Mat. Res.. Publicado em: 2015-06
-
22. Influência da adição de nanopartículas de TiO2 na obtenção de compósitos a base de liga AA2014 fabricada via metalurgia do pó / Influence of the addition of TiO2 nanoparticles in the composites formation based AA2014 alloy manufactured by powder metallurgy
Aluminum matrix composites and its alloys, especially AA2014, are widely used in automotive and aeronautics applications. The properties of this are very influenced by hardening treatment, however its use is limited at temperatures above 150C due to loss of properties caused by the growth of precipitates at this temperature. The addition of a new phase, fine
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/06/2012
-
23. Polyurethane structural adhesives applied in automotive composite joints
In recent years structural adhesives technology has demonstrated great potential for application due to its capacity to transform complex structures into solid unitary and monolithic assemblies using different materials. Thus, seams or joints integrate these structures providing, besides a reduction in weight, a considerable increase in the mechanical resist
Materials Research. Publicado em: 08/05/2012
-
24. AvaliaÃÃo do desempenho de ligante asfÃltico modificado por poli (Ãcido fosfÃrico) (PPA) e efeitos da adiÃÃo do lÃquido da casca da castanha de caju (LCC). / Performance evaluation of asphalt binder modified poly (phosphoric acid) (PPA) and effects adding the liquid from the bark of cashew (LCC)
The AC with 50/70 penetration grade (Petrobras - LUBNOR), pure and modified by polyphosphoric acid (PPA), was analyzed by rheological tests (viscosity and DSR), thermal analysis (TGA and DSC), spectrometric (NMR and FTIR) and chromatographic (TLC-FID and GPC) methods. The interaction of AC with PPA was investigated from the reactions of its fractions (aromat
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/12/2011