High Speed Steel
Mostrando 1-12 de 86 artigos, teses e dissertações.
-
1. Heat treatment analysis of ASTM A106 steel spheroidization and erosive wear at high temperatures
Abstract The microstructures of steels are altered when exposed to high working temperatures for long periods, which results in varied physical and chemical proprieties. This study evaluates the erosive wear behavior of ASTM A106 steel after it is exposed to high temperatures for long durations. Samples of normalized ASTM A106GrB steel were placed in a muffl
REM, Int. Eng. J.. Publicado em: 2020-12
-
2. Effect of Quenching Process on Microstructure and performance of High-Boron High-Speed Steel
ABSTRACT The effects of quenching process on microstructure and hardness of High-Boron High-Speed Steel (HB-HSS) containing 0.4%C-6.0%Cr-4.0%Mo-1.0%V-1.0%Si-0.5Mn-x%B-y%Al (x=1.0, 1.5, 2.0, y=1.0, 2.0, 3.0) were investigated by means of optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Rockwell hardness tester. The exp
Matéria (Rio J.). Publicado em: 16/09/2019
-
3. Study of the metallurgical bond between 316 steel substrates and NiCrAlY coating sprayed by HVOF and irradiated with a low power CO2 laser
RESUMO Considerando a importância do desenvolvimento de novos materiais ao longo dos últimos anos; os pesquisadores vêm estudando soluções eficazes através do uso de revestimentos de alta dureza para aplicação em ferramentas de corte e matrizes de conformação. Revestimentos de carboneto de tungstênio (WC) são um dos mais utilizados em sistemas de
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Keyhole GTAW with Dynamic Wire Feeding Applied to Orbital Welding of 304L SS Pipes
Resumo Atualmente, no cenário brasileiro de óleo e gás a execução dos processos de soldagem para aços inoxidáveis consiste em sua grande maioria de aplicações manuais, dificultando qualquer aumento de produtividade e repetibilidade dos processos. Portanto, a automação desta etapa permite grandes avanços com resultados mais confiáveis, menores c
Soldag. insp.. Publicado em: 15/08/2019
-
5. Análise das Propriedades Mecânicas de Juntas de Aço Carbono Estrutural Soldadas pelo Processo Arco Submerso com os Arcos Simples e Duplo (Tandem-Arc)
Resumo Diante de um cenário econômico onde a concorrência é cada vez mais acirrada, a busca por processos, técnicas e equipamentos de soldagem que proporcionem ganhos na produtividade é uma exigência para garantir a competitividade das empresas no mercado. Com o desenvolvimento e a adoção de novas tecnologias é possível inovar os processos convenc
Soldag. insp.. Publicado em: 13/06/2019
-
6. Heat Treatment of Sintered Valve Seat Inserts
The characterization of sintered valve seat inserts (VSIs) after being subjected to different heat treatment operations has been carried out. The VSIs were obtained from three different alloys by mixing iron powder with AISI M3:2, AISI M2 high-speed steels, and AISI D2 tool steel. After sintering, the VSI were quenched in air followed by double tempering at
Mat. Res.. Publicado em: 02/08/2018
-
7. Método innovador de ensayos de impacto en altas temperaturas aplicado en aceros al carbono
ABSTRACT In this paper, an innovative method of impact tests at high temperature on sub-size Charpy V notched specimens is applied. The innovation lies in the method of heating the specimen, which is performed in situ on a Charpy impact machine type by alternating electrical current through the specimen. The specimens are heated in a few seconds (v=32 ºC/s)
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Caracterización del comportamiento frente a la corrosión en soldaduras de recargue de aceros inoxidables superdúplex
ABSTRACT Superduplex stainless steels have a dual structure constituted approximately by 50% of ferrite and 50 % of austenite. This fact produces a good combination of mechanical properties and corrosion resistance. Thanks to these features their use is growing, mainly in the industries of paper, chemical, gas and oil. Surfacing welding is used for the manuf
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Estudio de la evolución microestructural durante el austenizado de un acero ASTMA335 P91
ABSTRACT Quenched and tempered 9%Cr grade 91 steels (9Cr1MoNbVN) display a lath martensitic matrix with M23C6 (M = Cr, Fe) carbides and fine precipitates named MX (M = Nb, V; X = C, N). MX particles provide the key to control the size and size distribution of austenite grains, which is significantly important in designing materials with specific mechanical p
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. HVOF-sprayed Coating Over AISI 4140 Steel for Hard Chromium Replacement
The replacement of electrolytic hard chrome (EHC) by high velocity oxy-fuel (HVOF) sprayed coatings is investigated due to the toxicity of EHC process. The wear behavior of AISI 4140 steel coated by HVOF-, EHC-process was compared to quenched and tempered (Q&T) steel using a pin-on-disc apparatus. The wear tests were conducted at room temperature, 10 N appli
Mat. Res.. Publicado em: 28/05/2018
-
11. Numerical Analysis of Twin-Roll Casting of Strips With Profiled Cross-Section
The relatively high production costs of innovative materials with tailored properties such as Tailor Welded Blanks, Patchwork Blanks, Tailor Heat Treated Blanks and Tailor Rolled Blanks are responsible for a growing interest in new cost-effective production methods. One of the promising energy-saving and environmental friendly technologies for the production
Mat. Res.. Publicado em: 16/04/2018
-
12. Study of the AISI 52100 Steel Reuse Through the Powder Metallurgy Route Using High Energy Ball Milling
The AISI 52100 is a tool steel used in industry to produce bearings. After the end of its life cycle, it is remelted or discarded in deposits. The powder metallurgy rises as an alternative to recycle this material without any waste. The steps used to produce the AISI 52100 steel by powder metallurgy included: Machining with speed of 45 rpm, high energy ball
Mat. Res.. Publicado em: 06/11/2017