Heat Pump
Mostrando 1-12 de 50 artigos, teses e dissertações.
-
1. HYBRID SOLAR HEAT PUMP SYSTEM FOR WATER HEATING
ABSTRACT A comparative test of water heating between the hybrid system - solar collector with heat pump - and a system with conventional supplementary heating - with high electric power - was performed. For this, a small capacity heat pump was installed, which was later installed together with a solar heating system, composed of a 250 L thermal reservoir and
Eng. Agríc.. Publicado em: 12/08/2019
-
2. Eucalyptus oil to mitigate heat stress in broilers
ABSTRACT The objective of this study was to evaluate performance, hematological parameters, leukocyte counts, and respiratory microbiota of broilers under heat stress receiving eucalyptus oil supplementation. Cobb broilers (n = 1200) were randomly distributed on the first day of life in a factorial arrangement with additional treatment (2 × 2 + 1) with two
R. Bras. Zootec.. Publicado em: 25/02/2019
-
3. Quality analysis of microwave dried iron yam chips controlled by infrared thermal imaging
Abstract The aim was to study the real-time temperature control by infrared thermography and the quality changes of the iron yam chips during drying processes. Microwave (MW) and heat pump (HP) were used to dry iron yam chips at 50, 60 and 70 °C. The material surface temperatures were online controlled by infrared thermal imaging system in the process of m
Food Sci. Technol. Publicado em: 19/04/2018
-
4. Heat pump for thermal power production in dairy farm
ABSTRACT Besides cold for milk cooling, dairy facilities need to produce hot water for cleaning of tools and equipment. Overall, ohmic heating has been used in dairy farms, increasing power consumption and manufacturing costs. Therefore, as an alternative to reduce power consumption, this paper proposed a water-water heat pumping for simultaneous cold and he
Eng. Agríc.. Publicado em: 2016-10
-
5. Otimização térmica e econômica de bomba de calor para aquecimento de água, utilizando programação quadrática sequencial e simulação através do método de substituição Newton Raphson / Thermal and economic optimization of heat pump for heating water, using sequential quadratic programming and simulation by substitution Newton Raphson method
O trabalho apresenta metodologias computacionais de otimização e simulação para o desenvolvimento do projeto de um sistema de bomba de calor para aquecimento de água em prédios residenciais, especialmente para uso em banho na região de Campinas. O sistema bomba de calor foi simulado focando o estudo nos trocadores de calor (evaporador e condensador).
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/12/2011
-
6. Bomba de calor ar/ar como sistema alternativo no aquecimento de aviÃrios / Heat pump air/air as a heating alternative system in avian.
A presente pesquisa teve como objetivo geral criar dois protÃtipos para aquecimento de aviÃrio de corte, o primeiro protÃtipo montado a partir de uma bomba de calor ar/ar, e o segundo protÃtipo montado a partir de um aquecedor elÃtrico de passagem. Como objetivo especifico avaliar o desempenho energÃtico do protÃtipo 1 simulando diversas situaÃÃes p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/09/2011
-
7. Bomba de calor ar/ar como sistema alternativo no aquecimento de aviÃrios / Heat pump air/air as a heating alternative system in avian
A presente pesquisa teve como objetivo geral criar dois protÃtipos para aquecimento de aviÃrio de corte, o primeiro protÃtipo montado a partir de uma bomba de calor ar/ar, e o segundo protÃtipo montado a partir de um aquecedor elÃtrico de passagem. Como objetivo especifico avaliar o desempenho energÃtico do protÃtipo 1 simulando diversas situaÃÃes p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/09/2011
-
8. Modelo para determinação da perda de carga contínua em tubos elásticos / Model for determining the continuous head losses in elastic pipe
Total head losses are accounted in the irrigation hydraulic projects, that would be the continuous losses and the local head losses, aiming to maximize the uniformity of water distribution, characterizing an adequate pump set to the irrigation system e thus, minimizing the project implantation and annual costs. With informatics support, complex calculation p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 05/08/2011
-
9. Desenvolvimento de um sistema de purificação de água com bomba de calor / Development of a water purification system with heat pump
The simplest process for water to reach adequate purity is the conventional distillation, however this method has drawbacks such as their high expense with electric energy and their high water consumption. Searching alternatives to produce purified water with saving energy and water cooling, but with production as purity as conventional, there is the possibi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 06/05/2011
-
10. Estudo de viabilidade técnica e econômica da instalação de um sistema de aquecimento de água utilizando energia solar / Study of technical and economic feasibility of installing a water heating system using solar energy
Este trabalho visa a realizar um estudo de viabilidade técnica e econômica da instalação de um sistema solar termodinâmico – para aquecimento de água- em uma residência na cidade do Rio de Janeiro. Este tipo de estudo é importante na medida em que a utilização de energias alternativas em substituição aos modelos tradicionais, denominadas “ene
Publicado em: 2011
-
11. Desempenho energético e caracterização dos sistemas de aquecimento de água de piscinas. / Energetic performance and characterization of swimming pool heating systems.
The aim of this research is to investigate the energetic performance of two distinct kinds of swimming pool heating systems: gas-fired and electric heat pump. A practical instrumentation research was prepared in these two indoor swimming pools, placed in the same location. Besides these, other four swimming pool, placed each in a different ambient in the cit
Publicado em: 2010
-
12. MODELING OF THE USE OF NANOFLUIDS IN INTERNAL COMBUSTION ENGINES COOLING SYSTEMS / MODELAGEM DO USO DE NANOFLUIDOS NO SISTEMA DE ARREFECIMENTO DE MOTORES A COMBUSTÃO INTERNA
The application of nanofluids in cooling systems of internal combustion engines was studied. Nanofluids consist of nanoparticles (with dimension below 100 (u)m) suspended in traditional heat transfer fluids, such as water or ethylene glycol. Given their favourable heat transfer characteristics, because of the suspension of high thermal conductivity particles
Publicado em: 2009