Grounding Resistance
Mostrando 1-9 de 9 artigos, teses e dissertações.
-
1. Structural Analysis of the Double Bottom Structure During Ship Grounding by Finite Element Approach
Abstract Possibility of a water-transportation mode to experience numerous accidental loads is predicted limitless and always demand sustainable analysis. Impact phenomenon raises as main reason of environmental damage, for instance, grounding contributes in form of short-time impact and produces massive damage on the bottom structure of a marine vessels, e.
Lat. Am. j. solids struct.. Publicado em: 2017-06
-
2. Corrosion resistance of 2024 aluminum alloy coated with plasma deposited a-C:H:Si:O films
AA 2024 aluminum alloy is widely employed in aeronautic and automobilist industries. Its hardness and low density are attractive properties for such industrial areas. However, since it contains copper, it undergoes severe corrosion in aggressive media as saline or low Earth orbit environments. In this work, it was investigated the properties of films deposit
Mat. Res.. Publicado em: 2014-12
-
3. Avaliação da customização por desgaste de pinos pré-fabricados de fibra de vidro / Evaluation of fibre posts submitted to customization of the apical portion
The purpose of this study was to evaluate fibre posts (White Post DC/FGM) submitted to customization of the apical portion. Experiment 1: 5 #4 posts were divided into five groups (G) and submitted to different custom adaptation treatments: GA no surface treatment, GB- industrial shaping tool (Dentsply), GC- #3195 fine diamond bur (KG Sorensen), GD- medium-gr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/01/2012
-
4. Avaliação de sistemas de aterramento considerando a utilização de condutores e hastes envolvidos em concreto / Evaluation of grounding systems considering the use of conductors and rods encased in concrete
O aterramento elétrico cumpre uma função essencial em um sistema de distribuição de energia elétrica, devendo atender, dentre vários requisitos, aqueles estabelecidos quanto aos valores de tensão de passo e de toque. Entretanto, em locais onde o solo apresenta valores elevados de resistividade, surgem dificuldades que nem sempre são superadas no sen
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/06/2011
-
5. A influência da resistência de terra nos efeitos das descargas atmosféricas
Existe uma grande preocupação por parte das concessionárias de energia relacionada aos distúrbios que geram sobretensões induzidas na rede elétrica, pois estas atingem os equipamentos sensíveis dos consumidores, causando danos e perdas. Em conseqüência deste quadro, as concessionárias contraem grandes prejuízos financeiros todos os anos devido ao
Publicado em: 2009
-
6. Single-line-to-earth fault limitation through the setting of Petersen coil in power transformer neutral / Limitação de correntes de falta fase-terra por meio do ajuste de bobina de petersen em neutro de transformadores de potência
The Petersen coil insertion on the neutral of the electrical distribution power system transformers has been a technical strategy adopted for several electrical utilities, in many countries with the purpose to reduce the earth-fault current intensities, enabling circuit disconnect decrease for intermittent faults and so to improve the electrical power qualit
Publicado em: 2009
-
7. Investigação teórico-experimental sobre a resposta de aterramentos elétricos frente a correntes de descargas atmosféricas
This work presents the results of an experimental investigation about the behavior of grounding electrodes subjected to low intensity impulsive currents, whose waveforms are similar to the lightning ones. Basically the results consist in the response of electrodes, in terms of developed voltage, to the injection of impulsive currents, considering soils with
Publicado em: 2008
-
8. Aplicação do método de imagens complexas ao cálculo de malhas de aterramento em solos com estratificação horizontal. / Modelling of grounding grids in multilayer soils using complex images.
Grounding grid design requires both ground resistance and surface potential. Traditional method of images restricts this calculation to two layer soils. Complex image method allows calculation of both resistance values and potentials at the soil surface, in multilayer soils with horizontal stratification, without grounding grid position limitation. This work
Publicado em: 1999
-
9. Temperature effects on membrane potential and input resistance in rat hypothalamic neurones.
1. Whole-cell recordings were conducted in rat hypothalamic tissue slices to test the hypothesis that thermal changes in membrane potential contribute to neuronal thermosensitivity. Intracellular recordings of membrane potential and input resistance were made in eighty-two neurones, including twenty-four silent neurones and fifty-eight spontaneously firing n