Graphite Oxide
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. A New Synthetic Route and Comprehensive Topological Study of a Benzimidazole Derivative
Benzimidazole and its derivatives are molecules that have diverse biological properties, therefore we synthesized and studied a new benzimidazole to understand their physical/chemical properties. The compound was obtained through a new synthetic route, using graphite oxide, in the absence of solvent, with crystalline packaging supported by C-H…N and C-H…
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. GRAPHENE OXIDE AND A GO/ZnO NANOCOMPOSITE AS CATALYSTS FOR EPOXY RING-OPENING OF EPOXIDIZED SOYBEAN FATTY ACIDS METHYL ESTERS
Abstract In this work, the grapheme oxide (GO) and GO/ZnO nanocomposite were successfully obtained from the oxidation of graphite and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermogravimetric analysis (TGA). In the GO/ZnO nanocomposite, the GO sheets were coated with aggregated
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
3. New Synthesis Method for a Core-Shell Composite Based on α-Bi2O3 @PPy and its Electrochemical Behavior as Supercapacitor Electrode
New composite based on polypyrrole (PPy) and bismuth oxide (α-Bi2O3) was investigated as supercapacitor electrode. The α-Bi2O3 was obtained by hydrothermal route at 500 ºC for 2 h. Cyclic voltammetry was used to electropolymerize PPy on graphite electrode (GE) or on GE/α-Bi2O3. The X-ray diffraction profile of Bi2O3 revealed the α-Bi2O3 monoclinic struc
J. Braz. Chem. Soc.. Publicado em: 2019-04
-
4. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
5. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
6. Synthesis of Graphene Oxide and Functionalized CNT Nanocomposites Based on Epoxy Resin
ABSTRACT Lately, nanomaterials have been largely studied as reinforcements for epoxy resin. Although their usage is highly promising, the literature has reported some drawbacks regarding the improvement of mechanical properties in nanocomposites. These difficulties are usually due to dispersion of nanomaterials and its adhesion to the polymeric matrix. One a
J. Aerosp. Technol. Manag.. Publicado em: 16/07/2018
-
7. Lead hazard evaluation for cathode ray tube monitors in Brazil
Abstract Cathode ray tube (CRT) monitors are electronic equipment mainly made of glass, polymers and metals. These devices became obsolete because of emerging technologies such as LCD, LED and plasma; thus generating a huge stockpile of e-waste worldwide. In this CRT study, a natural leaching simulation (NBR10005) was performed to determine the toxicity of t
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
8. Solvothermal Reduction of Graphite Oxide Using Alcohols
In the present work, we use either ethanol or ethylene glycol as reducing agents through the solvothermal method for graphite oxide reduction. A sulfuric acid treatment before the reduction process was also applied to evaluate its influence on the epoxy group ring-opening reaction. Reduced graphene oxide (RGO) samples were obtained with morphology like crump
Mat. Res.. Publicado em: 18/12/2017
-
9. ESTUDO ATRAVÉS DE RMN DE 13C NO ESTADO SÓLIDO SOBRE A SÍNTESE DE OXIDO DE GRAFITE UTILIZANDO DIFERENTES PRECURSORES GRAFÍTICOS
The influence of the structural and microstructural characteristics of graphitic precursors on the production of graphite oxide (GO) is investigated in the present work. Six different graphitic precursors were used to produce GO following a modified Hummers method, namely: natural graphite, commercial lubricant graphite, milled graphite, graphite flakes, hig
Quím. Nova. Publicado em: 2017-10
-
10. Low Potential and Non-Enzymatic Hydrogen Peroxide Sensor Based on Copper Oxide Nanoparticle on Activated Pencil Graphite Electrode
An electrochemical sensor for H2O2 determination was prepared by electrodepositing copper oxide nanoparticles on the activated pencil graphite electrodes. At first, a study has been made of the optimum conditions for chemical activation of the pencil graphite electrodes (APGE) and then the activated pencil graphite electrode was modified with copper oxide na
J. Braz. Chem. Soc.. Publicado em: 2017-05
-
11. Anomalous Behavior of a Solid Rocket Motor Nozzle Insert During Static Firing Test
ABSTRACT This paper presents the study and development of a firing test used to evaluate the behavior of a solid rocket motor. The motivation for the development of a subscale solid rocket motor with end burning propellant grain geometry arose from the need to evaluate the nozzle inserts of graphite for the possible replacement with the carbon fiber-reinforc
J. Aerosp. Technol. Manag.. Publicado em: 2016-12
-
12. Few Layer Reduced Graphene Oxide: Evaluation of the Best Experimental Conditions for Easy Production
This work aimed to produce graphene oxide with few graphene layers, a low number of defects, good conductivity and reasonable amount of oxygen, adequate for use as filler in polymeric composites. Two starting materials were evaluated: expanded graphite and graphite flakes. The method of oxidation used was the Staudenmaier one, which was tested over different
Mat. Res.. Publicado em: 24/11/2016