Granulometry
Mostrando 13-24 de 121 artigos, teses e dissertações.
-
13. Nitretação por descargas elétricas da liga Ti-6Al-4V com adição de pó abrasivo SiC ao fluido dielétrico
RESUMO O processo de nitretação que usa Usinagem por Descargas Elétricas é um método que associa a capacidade de usinar superfícies complexas com a obtenção de tratamento termoquímico de nitretação. A fonte de nitrogênio é proveniente da uréia, que compõe o fluido dielétrico juntamente com água deionizada. A liga de titânio Ti-6Al-4V possui
Matéria (Rio J.). Publicado em: 16/09/2019
-
14. Influence of Particles Size on NIR Spectroscopic Estimations of Charcoal Properties
ABSTRACT The objective of this study was to evaluate the influence of particle size of charcoal samples on the predictive model statistics of charcoal chemical composition based on the NIR spectroscopy. Spectra of Acacia and of Eucalyptus charcoal were collected in the 100, 60 and 40 mesh granulometry, besides the powder remaining at the bottom of the sieves
Floresta Ambient.. Publicado em: 09/09/2019
-
15. Mechanical properties of mortar produced with the replacement of natural sand by scheelite residue
Resumo O resíduo gerado pelas atividades industriais representa um custo, já que os geradores são responsáveis pela sua gestão, transporte, tratamento e disposição. O estado do Rio Grande do Norte, Brasil, é o maior produtor de resíduos de scheelita. O objetivo desta pesquisa foi caracterizar este resíduo de mineração, identificar sua similaridad
Cerâmica. Publicado em: 15/08/2019
-
16. Trace metals and PAHs in topsoils of the University campus in the megacity of São Paulo, Brazil
Abstract: The aim of this study is to discuss the concentration distribution, composition and possible sources of trace metals and 13 PAHs in topsoils of the University campus, in the city of São Paulo, the largest city of South America. Mineralogy and granulometry of topsoils (0-10 cm) samples, were determined and As, Ba, Cd, Co, Cr, Cu, Mo, Ni, Pb, Sb, V,
An. Acad. Bras. Ciênc.. Publicado em: 12/08/2019
-
17. WATER AVAILABILITY IN A PLANOSOL UNDER INTEGRATED CROP-LIVESTOCK-FORESTRY SYSTEM IN THE AGRESTE REGION OF PARAIBA, BRAZIL
RESUMO Os sistemas integrados de produção agropecuária, envolvendo lavoura, pecuária e floresta (ILPF) são estratégias que promovem a qualidade do solo. Objetivou-se com esse trabalho avaliar a influência do sistema de integração Lavoura-Pecuária-Floresta na disponibilidade de água em um Planossolo na mesorregião do Agreste da Paraíba. O experim
Rev. Caatinga. Publicado em: 18/07/2019
-
18. GRANULOMETRY AND ENERGY CONSUMPTION AS INDICATORS OF DISINTEGRATION EFFICIENCY IN A HAMMER MILL ADAPTED TO EXTRACTING ARROWROOT STARCH (Maranta arundinacea) IN COMPARISON TO STARCH EXTRACTION FROM CASSAVA
ABSTRACT The commercial sector of starch extraction has fully automated plants with a minimum scale of 200 ton.day–1, which extracts starch from maize and cassava in Brazil. Although these starches are commodities, the market demands starches with special properties obtained without chemical modifications. A higher-priced starch can compensate for small-sc
Eng. Agríc.. Publicado em: 19/06/2019
-
19. Investigación de diseños de mezcla para producir Ultra High Performance Fiber Reinforced Concrete (UHPFRC) usando ANOVA
ABSTRACT An experimental study is presented to produce Ultra High Performance Fiber Reinforced Concrete (UHPFRC) including industrial waste in the mix, and determine the average compressive strength. The study includes factor arrangements to perform analysis of variance using ANOVA. The controllable factors were: (i) age of the sample; (ii) granulometry of t
Matéria (Rio J.). Publicado em: 10/06/2019
-
20. Potential of Pinus elliottii Engelm. needles as substrate conditioner for the production of “Fepagro C37 reck”Citrus rootstocks”
Resumo A produção de mudas de citros em ambiente protegido demanda grande quantidade de substrato, o qual deve apresentar características físicas e químicas adequadas. O uso de condicionadores ácidos, como acículas de Pinus, em mistura com substratos alcalinos, possibilita o cultivo de mudas com maior qualidade. O objetivo foi avaliar o desenvolvimen
Rev. Bras. Frutic.. Publicado em: 03/06/2019
-
21. STATISTICAL MULTIVARIATE ANALYSIS APPLIED TO ENVIRONMENTAL CHARACTERIZATION OF SOIL IN SEMIARID REGION1
RESUMO O solo é um sistema dinâmico e complexo ao ser estudado, que demanda para fins de pesquisa um considerável número de amostras e análises. Com os métodos estatísticos multivariados podem-se criar condições mais favoráveis ao analisar as amostras, i.e. redução e simplificação estrutural dos dados. Este trabalho tem por objetivo empregar a
Rev. Caatinga. Publicado em: 09/05/2019
-
22. Production of components with plaster residue and sodium citrate: physical, mechanical, rheological analysis
Resumo A indústria da construção civil, grande influenciadora no desenvolvimento econômico e social do país, é responsável por um grande consumo de matéria prima e produção de resíduos. O gesso, em especial, apresenta crescimento expressivo, sobretudo na região Nordeste, devido ao Pólo Gesseiro do Araripe. Considerando os graves problemas de seu
Ambient. constr.. Publicado em: 2019-04
-
23. Characterization of coal briquettes using tar as a binding material for use in a coke oven
Abstract In order to increase competitiveness in the steel industry through reduction of the cost of coal mixtures and increase in the quality productivity of coke in the oven, this research was developed with the aim of increasing the bulk density through briquetting of low power coking coal using tar as a binding material. Initially an industrial scale dou
REM, Int. Eng. J.. Publicado em: 2019-03
-
24. Evaluation of mechanical properties of porous alumina ceramics obtained using rice husk as a porogenic agent
Abstract The objective of this work was to evaluate the mechanical properties of porous alumina ceramics, using the rice husk as a porogenic element. The rice husk was milled and graded in two granulometry, <65 μm and 65-150 μm, and added in a high purity calcined alumina in the proportion of 5, 15 and 30 wt%. The samples were pressed by uniaxial pressing
Cerâmica. Publicado em: 2019-01