Granulated Blast Furnace Slag
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. Concretos com agregados reciclados de resíduos de construção e demolição e adições minerais: uma análise bibliográfica
RESUMO Os impactos ambientais causados pela produção do concreto precisam ser reduzidos para torná-lo um material mais sustentável. O uso de agregados reciclados em substituição aos agregados naturais e das adições minerais em substituição parcial ao cimento são alternativas que podem tornar o concreto um material com menor carga de poluentes asso
Matéria (Rio J.). Publicado em: 10/06/2019
-
2. Avaliação do potencial de utilização da escória granulada de fundição em concreto autoadensável
Resumo O presente estudo propõe um novo uso para a escória granulada de fundição: contribuir para a obtenção da viscosidade adequada em concretos autoadensáveis. Nesse tipo de concreto, em função de sua elevada fluidez, comumente são relatados problemas de segregação e, para contorná-los, podem ser utilizados fillers. A escória granulada é um
Ambient. constr.. Publicado em: 2019-03
-
3. DESEMPENHO DO CIMENTO PORTLAND BRANCO COM ESCÓRIA DE ALTO-FORNO E ATIVADOR QUÍMICO FRENTE AO ATAQUE POR SULFATO DE SÓDIO / PERFORMANCE OF A WHITE PORTLAND CEMENT WITH SLAG AND CHEMICAL ACTIVATOR AGAINST SODIUM SULFATE ATTACK
Os íons sulfato, encontrados na água do mar, em águas subterrâneas e em águas residuárias são agentes agressivos que podem levar a uma severa degradação do concreto. Ao reagirem com os produtos de hidratação do cimento, dependendo do tipo de cátion a que estão associados (magnésio, cálcio, potássio, sódio, amônio, etc.), da concentração e
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/08/2011
-
4. The effects of CuO nanoparticles on properties of self compacting concrete with GGBFS as binder
In this work, strength assessments and percentage of water absorption of high performance self compacting concrete containing different amounts of ground granulated blast furnace slag and CuO nanoparticles as binder have been investigated. Portland cement was replaced by different amounts of ground granulated blast furnace slag and the properties of concrete
Materials Research. Publicado em: 26/08/2011
-
5. The effects of ZnO2 nanoparticles on properties of concrete using ground granulated blast furnace Slag as binder
In the present study, flexural strength together with pore structure, thermal behavior and microstructure of concrete containing ground granulated blast furnace slag with different amount of ZnO2 nanoparticles has been investigated. Portland cement was replaced by different amounts of ground granulated blast furnace slag and the properties of concrete specim
Materials Research. Publicado em: 12/08/2011
-
6. Influencia de la temperatura de curado: hidratación y resistencia de pastas de cemento con escoria
Nowadays it is well known that using blast furnace slag as partial replacements for Portland cement adds technological, economic and environmental benefits. Those are some of the reasons why cements containing several additions (blast furnace slag, fly ash, calcareous material, etc) are commonly used. In recent years, blended cements started to increase amou
Matéria (Rio de Janeiro). Publicado em: 2010
-
7. Investigação de parâmetros do CCR com incorporação de escória granulada de alto forno para utilização como base de pavimentos. / Analysis of mechanical behavior of the RCC with incorporation of granulated blast furnace slag for use as pavement base.
The increasing environmental concerns as well as energy sources shortage leads industry to consider both optimization of production processes and sustainable use and disposal of its by-pass products. In siderurgical steel manufactures the most common by-pass product is the blast furnace slag with emphasis to its granulated shape. This study considered the ev
Publicado em: 2010
-
8. Uso dos resíduos da construção civil para a produção de pavimento intertravado a base de concreto de cimento portland e escória
Construction and demolition are two steps where the generation of waste is imperative, given the low industrialized processes. Due to the growth of cities, the demand for raw materials is becoming more expressive and their deposits more distant from consumer centers. Consequently there is an increase in the generation of rubble and storage areas. The granula
Publicado em: 2009
-
9. EFEITOS NAS PROPRIEDADES MECÂNICAS, ELÁSTICAS E DE DEFORMAÇÃO EM CONCRETOS COM ALTOS TEORES DE ESCÓRIA E CINZA VOLANTE. / EFFECTS ON MECHANICAL, ELASTIC AND DEFORMATION PROPERTIES ON CONCRETE WITH HIGH LEVELS OF SLAG AND FLY ASH.
The use of byproducts and industrial waste as pozzolanic, is an alternative to achieve the sustainability, economy and durability in concrete structures. This survey has as its purpose to analyze the effect on mechanical, elastic and deformation properties on concrete with a high level of granulated slag from blast furnace and fly ash in place of Portland bu
Publicado em: 2009
-
10. Sinterização de finos de resíduos de construção civil: uma contribuição para o desenvolvimento sustentável
The sintering of ore is a metallurgic process, in which iron ore fine, non-iron ore and fusiagent are agglomerates by partial fusion. The product of this process is a porous material that can be used in blast furnace. In this paper, it is assessed the possibility to use the same process to agglomerate demolition and construction waste fine. Samples of fine o
Publicado em: 2008
-
11. STUDY OF CARBONATION OF THE COVERCRETE LAYER OF PROTOTYPES OF CONCRETE WITH HIGH ADDITIONS CONTENTS AND LIME HYDRATED / ESTUDO DA CARBONATAÇÃO DA CAMADA DE COBRIMENTO DE PROTÓTIPOS DE CONCRETO COM ALTOS TEORES DE ADIÇÕES MINERAIS E CAL HIDRATADA
In this study deals the covercrete structural concrete layer with the use of hydrated lime in substitution in mass of the sand in ternary mixture of 70% of blast-furnace slag, 20%-fly ash and 10% of cement CPV-ARI (EVC) in comparison to reference with 100% CPV-ARI (R) and other ternary mixture of 70%-ground granulated blast-furnace slag, 20%-fly ash and 10%-
Publicado em: 2008
-
12. Estudo da influência de adições no módulo de elasticidade dinâmico, na resistência à fadiga e na tenacidade à fratura para concretos convencionais
In Brazil most used the industrial wastes as concrete additions are the blast furnace slag finely ground to an amorphous state and the silica fume. Recently, wastes from civil construction, specially the red ceramics, have been evaluated as possible concrete constituents. These materials act like cements or pozolanic material. They change the strength evolut
Publicado em: 2006