Glass Transition
Mostrando 1-12 de 249 artigos, teses e dissertações.
-
1. Glass transition and sorption properties of Köftür: a dehydrated fruit-based product
Abstract This study was conducted to determine the glass transition temperature (Tg) using Differential Scanning Calorimetry (DSC) and sorption characteristics of köftür, a dehydrated fruit-based product. Tg of was found to be 24.5 °C ± 0.30. Sorption isotherms were determined at 5, 15 and 25 °C using nine different salt solutions. The data were then ap
Food Sci. Technol. Publicado em: 2020-12
-
2. Glass Formation of Null-Matrix Cu-Hf-(Zr, Ti) Alloys
An approach following the null-matrix, Ti/Zr ratio of 2.08, for neutron diffraction was used to calculate the glass formation in Cu-Ti-(Hf,Zr) alloys. The Cu55Zr14.6Ti30.4, Cu61.48Hf18.52Zr6.48Ti13.52, Cu58.1Hf16.9Zr8.1Ti16.9 and Cu52.46Hf14.2Zr10.8Ti22.54 compositions (at. %), were calculated and prepared by argon arc melting. Copper die suction casting was
Mat. Res.. Publicado em: 13/01/2020
-
3. Antimicrobial zein coatings plasticized with garlic and thyme essential oils
Resumo Óleos essenciais com propriedades antimicrobianas são amplamente utilizados na indústria de alimentos. Neste estudo, objetivou-se avaliar a influência da mistura de óleos essenciais de alho (Allium sativum) e tomilho (Thymus vulgaris) nas propriedades antimicrobianas e mecânicas de filmes de zeína. Quatro bactérias (Escherichia coli enteropato
Braz. J. Food Technol.. Publicado em: 28/11/2019
-
4. Evaluation of Dynamic Mechanical Properties of Fique Fabric/Epoxy Composites
The fique is a plant typical of the Colombian Andes, from which relatively common items are fabricated. One of these is woven fabric extensively applied in sackcloths. The mechanical strength of fique fabric have motivated recent investigations on possible reinforcement of polymer matrix composites. For this purpose its thermo-mechanical behavior was unveile
Mat. Res.. Publicado em: 14/10/2019
-
5. Avaliação da utilização da pós cura nas propriedades térmicas e mecânicas de um sistema epóxi de cura à temperatura ambiente
RESUMO Neste trabalho, uma resina epóxi de cura a temperatura ambiente foi submetida a ciclos térmicos de pós cura para verificar as alterações nas propriedades térmicas e mecânicas finais do material. As amostras foram obtidas por vazamento em molde metálico e os ciclos de pós cura foram realizados a 75°C, 90°C, 110°C por uma hora e um ciclo de
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. Cellulose Nanocrystals and Jute Fiber-reinforced Natural Rubber Composites: Cure Characteristics and Mechanical Properties
A comparative study was conducted for three natural rubber (NR) composites: one containing raw jute fibers, one containing bleached jute fibers, and one containing cellulose nanocrystals (CNCs). The composites were prepared by adding each filler at 5 or 10 phr to the latex before chemical coagulation, and the composites were processed in a two-roll mixing mi
Mat. Res.. Publicado em: 26/08/2019
-
7. Castor polyurethane used as osteosynthesis plates: microstructural and thermal analysis
Abstract Bone fractures to be corrected need stabilization of their extremities, which is achieved with the use of plates and screws. This research aimed to produce castor bean polyurethane (Ricinus communis), to make resorbable plate, structural and thermal analysis. The production was made by the glycerolysis of the triglycerides present in the oil, after
Polímeros. Publicado em: 04/07/2019
-
8. Ascorbic acid encapsulation in a glassy carbohydrate matrix via hot melt extrusion: Preparation and characterization
Abstract Hot melt extrusion technology using a twin-screw extruder was employed to obtain maltodextrin, maltodextrin-gum arabic and maltodextrin-trehalose based glassy extrudates containing ascorbic acid (dispersed phase). Ascorbic acid payload of all three formulations was more than 15.67 g/100 g extrudates while the ascorbic acid yield was above 97%. The g
Food Sci. Technol. Publicado em: 16/05/2019
-
9. Crystallization Behavior and Mechanical Properties of Cu-based Bulk Metallic Glass Composites
This work highlights the relationship between the preparation, crystallization behavior, microstructures, and mechanical properties of Cu-based bulk metallic glasses (BMGs) and their composites (BMGCs). (Cu47Zr45Al8)97.5Y1.5Nb in-situ BMGCs were prepared using isothermal annealing, and the experimental results indicate tunable mechanical properties of the al
Mat. Res.. Publicado em: 06/05/2019
-
10. Physicomechanical and thermal analysis of bulk-fill and conventional composites
Abstract The aim of this study was to evaluate the degree of conversion (DC) and the thermal stability of bulk-fill and conventional composite resins. Eleven composite resin samples were prepared to evaluate the DC, Vickers microhardness (VMH), mass and residue/particle loss, glass transition temperature (Tg), enthalpy, and linear coefficient of thermal expa
Braz. oral res.. Publicado em: 18/03/2019
-
11. Consolidation of Fe-Based Metallic Glass Powders by Hot Pressing
An alternative route to obtain bulk metallic glasses is by consolidation of metallic glass powders by deforming these materials in the temperature interval between the crystallization temperature and the glass transition temperature, where the material flows with a reduced viscosity. In the present work, bulk parts of the Fe43.2Co28.8B19.2Si4.8Nb4 alloy were
Mat. Res.. Publicado em: 17/01/2019
-
12. Influence of Small Content Elements Additions on the Glass Forming Ability of Zr-based Bulk Metallic Glasses Alloys
The present work reports investigation on the Glass Forming Ability (GFA) of Zr-based Bulk Metallic Glasses (BMG’s) by microalloying with early transition metals. GFA was measured as the amorphous fraction formed in samples with different diameters using optical microscopy (OM) and image analysis techniques. Samples with the highest GFA had their oxygen co
Mat. Res.. Publicado em: 06/09/2018