Glass Fibre
Mostrando 1-12 de 50 artigos, teses e dissertações.
-
1. Influence of water absorption on glass fibre reinforced IPN composite pipes
Abstract Glass fibre reinforced composite pipes were fabricated by using an IPN blend of 0%, 10%, 20%, 30%, 40%, 50% PU prepolymer (Polyurethane) with VER(Vinylester) resin. The prepared IPN (Interpenetrating polymer networks) composite pipes were subjected to boiling water immersion tests in order to study the effect of moisture absorption characteristics.
Polímeros. Publicado em: 04/11/2019
-
2. Evaluation of the stiffening mechanism based on micro-sized particle inclusions in laminated composites
Rigid particles have been incorporated into laminated composites, especially to enhance their bending performance attributed to the stiffening of the matrix phase (i) and the increased interlaminar shear resistance (ii). In order to better evaluate the improvement mechanism provided by the particulate inclusions, this work investigates the incorporation of m
Mat. Res.. Publicado em: 17/10/2019
-
3. Influence of temperature on the adhesion of fibre reinforced polymers to timber surface
Resumo Os reforços de compósitos poliméricos com fibras de carbono (CFRP) e de vidro (GFRP) têm sido largamente usados em estruturas de madeira, onde eles podem estar expostos a condições adversas de temperatura. Para serem usados adequadamente, são necessárias informações sobre a sua adesão ao substrato. O objetivo desta pesquisa é avaliar a inf
Ambient. constr.. Publicado em: 10/06/2019
-
4. Effect of compatibiliser on the properties of polypropylene/glass fibre/nanoclay composites
Abstract Glass fibre (GF), nanoclay (NC) and hybrid composites compatibilised with maleic anhydride polypropylene (MAPP) were prepared by extrusion and injection moulding. The fourier transform infra-red spectra revealed the characteristic absorption peaks of MAPP in the compatibilised GF and NC composites. A decrement in the peak intensity of X-ray diffrac
Polímeros. Publicado em: 21/05/2018
-
5. Hybrid composites reinforced with short sisal fibres and micro ceramic particles
ABSTRACT Biocomposites reinforced with natural fibres have been extensively investigated as a promising replacing material for synthetic ones, such as the glass fibre reinforced composites. The length of natural fibres depends not only on the plant species, but also on the extraction processing. The heterogeneity of natural fibres, in terms of length, can be
Matéria (Rio J.). Publicado em: 20/07/2017
-
6. Evaluating the mechanical properties of E-Glass fiber/carbon fiber reinforced interpenetrating polymer networks
A series of vinyl ester and polyurethane interpenetrating polymer networks were prepared by changing the component ratios of VER (Vinyl ester) and PU (Polyurethane) and the polymerization process was confirmed with Fourier Transform infrared spectroscopy. IPN (Inter Penetrating Polymer Network - VER/PU) reinforced Glass and carbon fiber composite laminates w
Polímeros. Publicado em: 2015-02
-
7. Fractographic analysis of tensile failures of aerospace grade composites
This paper describes fractographic features observed in aerospace composites failed under tensile loads. Unidirectional Carbon Fibre Reinforced Plastic (UD CFRP) and Unidirectional Glass Fibre Reinforced Plastic (UD GFRP) composite specimens were fabricated and tested in tension. The morphology of fractured surfaces was studied at various locations to identi
Mat. Res.. Publicado em: 23/10/2012
-
8. Polyamide worm gear: manufacturing and performance
The focus of this paper is to establish a characterisation method for seven polyamide (PA) grades to determine the major material to manufacture an automotive worm gear. The composite properties were measured according to the worm gear loadings: tensile strength, Young's modulus, abrasion and impact resistance. They were also correlated to the PA moisture ab
Materials Research. Publicado em: 07/06/2012
-
9. Finite element validation on adhesive joint for composite fuselage model
A novel fabrication miniature composite fuselage structure consisted of a woven composite laminated with an adhesively bonded butt joint under axial compression loading is numerically simulated in this research. A Finite Element Analysis (FEA) via ABAQUS/Explicit was utilized to capture the complete compressive response that predicts the crushing behaviour a
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-03
-
10. Estudo do comportamento mecânico de dutos de aço com reparos compósitos hibridos / Mechanical behavior of steel pipes repaired with a hybrid laminate
Worldwide, steel pipes play an important role in many industrial sectors. Meanwhile, any kind of duct is prone to suffer superficial damages due to corrosion. In this sense, techniques which allow fast and reliable repairs of ducts have a fundamental importance to increase the life cycle, avoid accidents, minimize environmental contaminations and to keep the
Publicado em: 2010
-
11. Contribuição ao estudo das propriedades dos materiais cimentícios reforçados com fibras de vidro (Glass Fibre Reinforced Cement - GRC) / Contribution to the study of properties of glass fibre reinforced cement - GRC
Os materiais cimentícios são materiais frágeis que apresentam resistências à tração e capacidades de deformação muito baixas. Uma das formas de contornar a fragilidade destes materiais é a utilização de fibras curtas, descontínuas e dispersas. Um exemplo destes materiais cimentícios são os produzidos com fibras de vidro, comumente denominados
Publicado em: 2009
-
12. Compositos hibridos de poli (tereftalato de etileno) (PET) / fibra de vidro (FV) / modificador de impacto (E-MA-GMA) / Hybrid composites of PET / modifier of impact (E-MA-GMA) fibre glass
An important application of poly(ethylene terephtalate) - PET - to be considered, and still not well explored, is its re-use in other different sectors, such as the obtaintion of PET composites reinforced with fibre glass (FG) and elastomer, for several applications in the engineering area. In this way, it is necessary a systematic study of several PET compo
Publicado em: 2008