Glass Fiber Post
Mostrando 1-12 de 69 artigos, teses e dissertações.
-
1. Tissue Response after Subcutaneous Implantation of Different Glass Ionomer-Based Cements
Resumo O objetivo deste estudo foi avaliar a resposta subcutânea do tecido conjuntivo de camundongos isogênicos após o implante de diferentes cimentos à base de ionômero de vidro (EQUIA® Forte Fil, EQUIA® Fil e Ketac ™ Universal Aplicap ™). Oitenta e sete camundongos isogênicos BALB/c foram alocados em 12 grupos, 9 como grupos experimentais (Keta
Braz. Dent. J.. Publicado em: 28/11/2019
-
2. Effect of Magnification during Post Space Preparation on Root Cleanness and Fiber Post Bond Strength
Resumo Avaliar o efeito do método de visualização durante o preparo do espaço do pino sobre o remanescente de material obturador endodôntico e sobre a resistência adesiva do pino de fibra de vidro. Trinta incisivos centrais superiores humanos com canal radicular circular foram selecionados, foram desobstruídos a 15 mm e obturados. Os dentes foram divi
Braz. Dent. J.. Publicado em: 07/10/2019
-
3. Glass fiber post treatment – does it influence resin cement bond strength?
Resumo Introdução Pinos de fibra de vidro são utilizados para melhorar a retenção das restaurações em dentes tratados endodonticamente. Objetivo Avaliar a resistência de união de pinos de fibra de vidro submetidos a diferentes tratamentos superficiais e cimentados à dentina radicular com cimento resinoso autoadesivo. Material e método trinta ra
Rev. odontol. UNESP. Publicado em: 26/09/2019
-
4. Potencial antimicrobiano de diferentes retentores intrarradiculares frente a Enterococcus faecalis: uma avaliação in vitro
Resumo Introdução O tratamento endodôntico tem como objetivo erradicar microrganismos bacterianos e fúngicos do canal radicular, ou pelo menos possibilitar sua redução para níveis compatíveis com a saúde do tecido perirradicular, uma vez que, após o tratamento endodôntico, colônias de microrganismos residuais podem estar presentes nos túbulos d
Rev. odontol. UNESP. Publicado em: 23/09/2019
-
5. Effect of Glass Fiber Post Adaptation on Push-Out Bond Strength to Root Dentin
Resumo O objetivo neste estudo foi avaliar o impacto de diferentes diâmetros de pinos de fibra de vidro (PFVs) na resistência de união à dentina. Quarenta dentes humanos unirradiculares foram tratados endodonticamente e utilizados para cimentação de PFVs (White Post DC, FGM) com diferentes diâmetros (n=10): P1 - ø 1,6 mm coronal x 0,85 mm apical; P2
Braz. Dent. J.. Publicado em: 22/07/2019
-
6. Microtensile bond strength of root canal dentin treated with adhesive and fiber-reinforced post systems
Abstract Nowadays, demand for esthetic restorations has risen considerably; thus, nonmetal esthetic posts made of either high-strength ceramics or reinforced resins, such as fiber-reinforced resin posts, have become more and more popular. Important characteristics of fiber-reinforced posts involve a modulus of elasticity similar to dentin and their ability t
Braz. oral res.. Publicado em: 01/07/2019
-
7. Do Irrigation Solutions Influence the Bond Interface Between Glass Fiber Posts and Dentin?
Resumo O objetivo deste trabalho foi avaliar a resistência de união e permeabilidade da interface de pinos de fibra de vidro nos diferentes terços da dentina intrarradicular (cervical, médio e apical) submetidos a diferentes agentes irrigantes. Noventa dentes unirradiculares humanos foram submetidos ao tratamento endodôntico e foram divididos em cinco g
Braz. Dent. J.. Publicado em: 04/04/2019
-
8. Light curing resin cements containing iodonium salts promote suitable apical bonding of posts to radicular dentin
Abstract The aim of this study was to analyze the efficiency of experimental light-curing resin cements (ERCs) with a ternary photo-initiator system containing diphenyliodonium hexafluorphosphate (DPI) and different amines on retention of glass-fiber posts to dentin (GFP). ERCs formulations: a 1:1 mass ratio of 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy)phen
Braz. oral res.. Publicado em: 14/11/2018
-
9. Influence of preheating and post-curing on a novel fiber-reinforced composite post material
Abstract The aim of this study was to investigate the influence of preheating and post-curing methods on diametral tensile strength (DTS), flexural strength (FS), knoop microhardness (KHN), and degree of conversion (DC) of an experimental fiber-reinforced composite (FRC). Specimens (30 wt% of 3-mm-short E-glass fiber, 22.5 wt% of methacrylated-based resin an
Braz. oral res.. Publicado em: 29/10/2018
-
10. Compatibilization of recycled polypropylene and recycled poly (ethylene terephthalate) blends with SEBS-g-MA
Abstract The compatibilization of recycled PP/PET blend with high and low concentration (20 and 5 phr) of elastomer functionalized by maleic anhydride (SEBS-g-MA) was achieved. Recycled polypropylene from plastic industry and recycled PET from post-consumer bottles was used. PP/PET blends: 80:20 w/w, 50:50 w/w and 20:80 w/w were prepared in an internal mixe
Polímeros. Publicado em: 15/03/2018
-
11. Bond strength values of fiberglass post to flared root canals reinforced with different materials
Abstract The aim of this study was to compare in vitro the bond strength (BS) between fiberglass posts and flared root canals reinforced with different materials. The roots of 48 premolars were endodontically treated. After one week, the root canals were prepared to simulate an oversized root canal, except for the positive control group (PCG), which was ceme
Braz. oral res.. Publicado em: 01/03/2018
-
12. Influence of Zingiber officinale Extract on Push-Out Bond Strength of Glass-Fiber Post
Resumo O objetivo deste estudo foi avaliar in vitro a influência do extrato de gengibre 20% na resistência adesiva de pinos de fibra de vidro cimentados com cimentos resinosos convencional ou autocondicionantes. Quarenta e oito raízes bovinas foram padronizadas (17±0.5mm) e aleatoriamente divididas em dois grupos (n=24), de acordo com o irrigante utiliza
Braz. Dent. J.. Publicado em: 2018-02