Gas Solid Fluidized Bed
Mostrando 1-12 de 32 artigos, teses e dissertações.
-
1. EVALUATION OF LIMESTONE IMPURITIES IN THE DESULFURIZATION PROCESS OF COAL COMBUSTION GAS
Abstract Limestones have been used to capture SO2 emitted during the combustion of coal for decades. However, due to the complexities of the variables involved in this process, many issues are still being studied. Some tests were performed in a fluidized bed reactor, which was used to evaluate the performance of the limestones in the bed for flue gas desulfu
Braz. J. Chem. Eng.. Publicado em: 2017-01
-
2. Metodologia para aplicar LES ao craqueamento catalítico fluido em um reator riser industrial / Large eddy simulation application methodology to a fluid catalytic cracking industry reactor
The main objective of this thesis is to propose a methodology in how to apply Large Eddy Simulation (LES) on a unit of catalytic cracking. In order to achieve this, it was proposed an alternative way of constructing the computational mesh, by using quasi-uniform meshes. The proposed meshes were implemented to minimize the computational effort and procedure f
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/09/2012
-
3. Estudos de processos avançados em geração termelétrica utilizando leitos fluidizados consumindo biomassa / Advanced studies on power generation processes based on fluidized beds consuming biomass
A study aiming maximizing the efficiency of an advanced combined power generation process has been developed. The process applies a pressurized fluidized bed boiler consuming sugar cane bagasse fed as slurry. The generated steam is diverted to a reheated Rankine cycle while the gas exiting the boiler is directed to a gas turbine process. Many assumptions hav
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/07/2012
-
4. Identification of defluidization region in a gas-solid fluidized bed using a method based on pressure fluctuation measurements
Industrial applications that involve fluidized bed operations must prevent the undesirable phenomenon of partial or complete bed defluidization. Defluidization can be avoided by increasing the gas velocity and/or, in some cases, changing the solid feed conditions in the system, provided that the changes in the hydrodynamics of the flow are detected early eno
Brazilian Journal of Chemical Engineering. Publicado em: 2009-09
-
5. Estudo preliminar da fluidodinamica do escoamento gas-solido de um leito fluidizado circulante atraves da analise dos sinais dinamicos de pressão / Preliminary study of gas-solid dynamics in a circulating fluidized bed through pressure fluctuations analysis
Este trabalho apresenta o estudo experimental das flutuações de pressão de um leito fluidizado circulante operando com areia, um sólido tipo B de Geldart, como material particulado. As medidas formam realizadas em diferentes regimes de contato gás-partícula variando desde leito fixo até leito fluidizado rápido através da variação da velocidade sup
Publicado em: 2009
-
6. Experimental and numerical study of spouted bed fluif dynamics
Spouted beds, originally invented in Canada by Mathur and Gishler (1955) as an alternative to fluidized beds for handling coarse particles, are now widely studied in a variety of physical operations, such as drying, coating and granulation. In this work the particle velocity, minimum spouting flow rate and characteristic fluid-dynamic curves of the spouted b
Brazilian Journal of Chemical Engineering. Publicado em: 2008-03
-
7. Simulação sub-malha com modelo de dois fluidos do escoamento gás-sólido em risers de leitos fluidizados circulantes / Sub-grid simulation with two-fluid model to gas-solid flow in circulating fluidized bed risers
Modelagem de dois fluidos é largamente aplicada para simular escoamentos gássólido em risers de leitos fluidizados circulantes. As atuais simulações são de grandes clusters (SGC), executadas em domínios reais com malhas numéricas grosseiras, ou simulações sub-malha, executadas em malhas numéricas refinadas em domínios reduzidos. O propósito das
Publicado em: 2008
-
8. Secagem de sementes de gramíneas (Brachiaria brizantha) em leito fluidizado
Drying operation is an important stage of the processing that precedes the storage of seeds, since that with low moisture contents, these can retain their power of germination and other qualities for long periods. The objective of this work was to perform a study of drying of grass seeds (Brachiaria brizantha) in a batch fluidized bed, in order to evaluate t
Publicado em: 2008
-
9. Caracterização de regimes estatisticamente permanentes em leitos fluidizados circulantes / Characterization of statistically permanent schemes in circulating fluidized bed combustion
Reatores de leito fluidizado circulante são caracterizados por escoamentos altamente heterogêneos e instáveis. Devido a isso, operam em regimes pseudo-estacionários ou estatisticamente permanentes, onde os parâmetros do escoamento oscilam em torno de valores médios bem definidos. Neste trabalho estuda-se o comportamento de uma solução numérica para
Publicado em: 2008
-
10. Arraste de partÃculas finas em um leito fluidizado e eficiÃncia de coleta de um ciclone dipleg
The system with a fluidized bed and a cyclone dipleg as gas-solid separator is used in industry in unities of circulating fluidization. Some applications are: the fluid catalytic cracking, to produce gasoline and heating oil and the beds of combustion. The principal variables to be identified in the cited system are the flux of entrained particles in the bed
Publicado em: 2008
-
11. Simulação numérica euleriana de escoamento gás-sólido em riser com dimensões reduzidas aplicando malhas refinadas / Eulerian numerical simulation of gas-solid flows in risers of reduced dimensions applying refined meshes
Dada a complexidade hidrodinâmica de escoamentos gás-sólidos em leitos fluidizados muitas pesquisas têm sido realizadas abordando questões relativas a natureza altamente instável desse processo de fluidização. O conhecimento dessa hidrodinâmica permite estabelecer os parâmetros corretos para reação e transporte de massa em um reator de leito flui
Publicado em: 2008
-
12. Atrito de particulas solidas de cloreto de sodio (NaCl) em leite fluidizado gasoso / Attrition of solid particles of sodium chlroide (NaCl) in gas-fluidized bed
O atrito de sólidos particulados é um problema enfrentado pelas indústrias que utilizam leito fluidizado parcialmente ou na totalidade de seus processos, tais como petroquímicas e farmacêuticas. Tal atrito é caracterizado pela ruptura ou desgaste involuntário das partículas durante a manipulação, processamento e armazenamento dos sólidos, sendo es
Publicado em: 2008