Gas Separation
Mostrando 13-24 de 187 artigos, teses e dissertações.
-
13. Influence of sintering temperature on the development of alumina membrane shaped by centrifugal casting for gas separation
Abstract The development of ceramic membranes for the most diverse separation processes has gained high visibility, mainly due to their better performance in harsh environments in comparison to polymeric materials. Among the different techniques used to prepare tubular ceramic membranes, the centrifugal casting (CC) is interesting for obtaining highly homoge
Cerâmica. Publicado em: 2019-01
-
14. Analysis of Isomeric Cannabinoid Standards and Cannabis Products by UPLC-ESI-TWIM-MS: a Comparison with GC-MS and GC × GC-QMS
The Cannabis sativa L. plant has a complex chemical composition, containing various chemical compounds such as terpenes, sugars, hydrocarbons, steroids, flavonoids, and amino acids. Few works have attempted to identify the constitutional isomers of cannabinoids that are found in the plant. The present study reported the analysis of seven cannabinoid standard
J. Braz. Chem. Soc.. Publicado em: 2019-01
-
15. Harmonious interaction of incorporating CNTs and zeolitic imidazole frameworks into polysulfone to prepare high performance MMMs for CO 2 separation from humidified post combustion gases
Abstract Multi-walled carbon nanotubes (CNTs) and zeolitic imidazole frameworks (ZIF-301) were synergistically incorporated into glassy polysulfone (PSF) to prepare mixed-matrix membranes (MMMs) to separate CO2 from post combustion flue gas. The flexible MMMs rendering consistent distribution and improved adhesion of nanofillers with the polymer matrix were
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
16. Effect of Lime Addition to CaSO 4 Oxygen Carrier in Chemical Looping Combustion
Abstract Chemical-looping combustion (CLC), which has the characteristic of greenhouse gas CO2 inherent separation, is a novel combustion technology. In this study, CLC experiments of methane using CaSO4 oxygen carrier with lime addition were carried out in a batched fluidized bed reactor, where the sample was exposed to alternate oxidizing and reducing cond
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
17. Polydimethylsiloxane Membranes Containing Multi-walled Carbon Nanotubes for Gas Separation
Polydimethylsiloxane (PDMS) membranes with different concentrations of multi-walled carbon nanotubes were prepared in order to evaluate their gas separation performances. Mixed matrix membranes were characterized by scanning electron microscopy, thermogravimetric analysis, Fourier transformed infrared, positron annihilation lifetime and Raman spectroscopies
Mat. Res.. Publicado em: 17/08/2017
-
18. HS-SPME optimization and extraction of volatile compounds from soursop (Annona muricata L.) pulp with emphasis on their characteristic impact compounds
Abstract Aroma and taste are decisive factors in the selection of any food. The aim of this study was to extract the volatile compounds present in soursop (Annona muricata L.) pulp by Solid-phase microextraction (SPME) technique using 3 different fibers (DVB/CAR/ PDMS, CAR/PDMS and PDMS/DVB). An experimental design was set up to evaluate the best extraction
Food Sci. Technol. Publicado em: 29/05/2017
-
19. Exploratory Analysis of Biodiesel by Combining Comprehensive Two-Dimensional Gas Chromatography and Multiway Principal Component Analysis
Comprehensive two-dimensional gas chromatography (GC×GC) was used in this work in order to reveal and identify minor compounds of several raw materials in biodiesel samples, which are not detected by conventional GC analysis. Multiway principal component analysis (MPCA) of the chromatographic profile allowed to identify compounds as C15:1n-3, C18:2n-6, C20:
J. Braz. Chem. Soc.. Publicado em: 2017-05
-
20. AVALIAÇÃO DO POTENCIAL USO DE BIOGLICERINA COMO BASE PARA FORMULAÇÃO DE FLUIDOS DE PERFURAÇÃO AQUOSOS PARA POÇOS DE PETRÓLEO E GÁS
The growing global concern about the environment associated with academic and government efforts are enabling a number of alternatives for sustainable development. Within this perspective one can include the search for value-added products using waste from renewable energy sources, such as those from the production of biodiesel. The rapid development of biod
Quím. Nova. Publicado em: 2017-05
-
21. Application of an Accurate and Validated Method for Identification and Quantification of Acrylamide in Bread, Biscuits and Other Bakery Products Using GC-MS/MS System
A gas chromatography tandem mass spectrometry has been developed and validated for the separation, detection, identification and quantification of acrylamide in bread, biscuits and similar products. The method showed good precision with values lower than 6%. A good sensitivity was achieved for bread with 2.41 and 7.23 µg kg-1 limit of detection (LOD) and li
J. Braz. Chem. Soc.. Publicado em: 2016-10
-
22. Chromophoreasy, an Excel-Based Program for Detection and Integration of Peaks from Chromatographic and Electromigration Techniques
This paper describes the development, evaluation, features and applications of Chromophoreasy, an alternative Excel-based program for recognition and integration of chromatographic and electrophoretic peaks. The proposed recognition is made according to parameters adjustable by the analyst, such as time range, noise smoothing window size and slope/curvature
J. Braz. Chem. Soc.. Publicado em: 2016-10
-
23. Treatment of swine manure: case studies in European’s N-surplus areas
ABSTRACT In this study, eight different manure treatment plants were monitored. The plants were four on-farm and four centralized treatment plants, all of them at full-scale level. Assessment includes a total of seven pre-treatment and process units as follows: mechanical separation, with and without coagulant and flocculant addition, pasteurization, nitrifi
Sci. agric. (Piracicaba, Braz.). Publicado em: 2016-10
-
24. AN EXPERIMENTAL STUDY OF H2 AND CO2 ADSORPTION BEHAVIOR OF C-MOF-5 AND T-MOF-5: A COMPLEMENTARY STUDY
Abstract In this paper the cubic and tetragonal structure of MOF-5 were successfully synthesized and characterized by TGA and SEM analysis. Equilibrium adsorption isotherms of C-MOF-5 and T-MOF-5 for H2 and CO2 were measured up to 25 bar at 298 K using a volumetric method. The C-MOF-5 adsorbent synthesized in this study had a 0.107 and 79.9 wt% adsorption ca
Braz. J. Chem. Eng.. Publicado em: 2016-03