Gas Processing
Mostrando 13-24 de 158 artigos, teses e dissertações.
-
13. Manufacturing of Cu-Sn foams through SDP
ABSTRACT This work reports the processing of bronze foams manufactured by using the powder metallurgy method known as Sintering Dissolution Process. During the sintering step, a device with controlled atmosphere separated from the heating furnace was employed to avoid the quick oxidation of metal particles. The device allows to control its internal atmospher
Matéria (Rio J.). Publicado em: 19/07/2018
-
14. Effect of Different Synthesis Methods on the Textural Properties of Calcium Tungstate (CaWO4) and Its Catalytic Properties in the Toluene Oxidation
Calcium tungstate (CaWO4) crystals were prepared by microwave-assisted hydrothermal (MAH) and polymeric precursor methods (PPM). These crystals were structurally characterized by X-ray diffraction (XRD), N2 adsorption, X-ray absorption near edge spectroscopy (XANES) and extended X-ray absorption fine structure (EXAFS) measurements. The morphology and size of
Mat. Res.. Publicado em: 16/04/2018
-
15. An Examination of the Prediction of Hydrate Formation Conditions in the Presence of Thermodynamic Inhibitors
Abstract Gas hydrates are crystalline compounds, solid structures where water traps small guest molecules, typically light gases, in cages formed by hydrogen bonds. They are notorious for causing problems in oil and gas production, transportation and processing. Gas hydrates may form at pressures and temperatures commonly found in natural gas and oil product
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
16. Fatty acids profile of chia oil-loaded lipid microparticles
ABSTRACT Encapsulation of poly-unsaturated fatty acid (PUFA)is an alternative to increase its stability during processing and storage. Chia (Salvia hispanica L.) oil is a reliable source of both omega-3 and omega-6 and its encapsulation must be better evaluated as an effort to increase the number of foodstuffs containing PUFAs to consumers. In this work chia
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
17. Achieving effective confinement through utilization of non-Newtonian fluid mixture as stemming structure
Abstract The economics of a mining operation is directly influenced by blasting outcomes, where blasting aims to comminute the rock mass in order to attain smaller grain sizes to be loaded and hauled at a minimum cost for its first processing stage. In order to promote adequate rock breakage, the stemming structure needs to provide proper confinement for the
REM, Int. Eng. J.. Publicado em: 2017-03
-
18. GC×GC-TOF/MS Analysis of Bio-Oils Obtained from Pyrolysis of Acuri and Baru Residues
Bark of acuri and endocarp of baru are residues generated during the processing of these fruits. One alternative to consider is the pyrolysis of these materials to generate bio-oils, opening the perspective for the production of environment-friendly, added value products. Samples of acuri and baru were subjected to laboratorial scale pyrolysis. At the optimi
J. Braz. Chem. Soc.. Publicado em: 2016-11
-
19. Comportamiento Tribológico y Microestructural en Recubrimientos Aplicados por GTAW y HVOF (Proceso Térmico de Espreado) y Usado en Recuperación de Aceros Grado Herramienta AISI/SAE D2
Abstract The Fe-Cr-Mo alloys are use in covers to protect the components that are under wear and corrosion. The high velocity thermo spray covering by HVOF (high velocity oxi-fuel) in Fe-Cr-Mo alloys has reported as a good result in projection fields for the steel tool grade for cold work. The HOVF is an attractive method to apply covering and recuperate dia
Soldag. insp.. Publicado em: 2016-06
-
20. Tenacidad a la fractura de compuestos cermets 3Al2O3*2SiO2/Ag manufacturados por molienda de alta energía
The composites known as CERMETS are a combination between ceramics and metallic materials. The properties of these materials are different in comparison to conventional materials and their derivatives. The processing methodology of 3Al2O3*2SiO2 reinforced with silver metallic particles (CERMET) was established and discussed in this research. The final chemic
Matéria (Rio J.). Publicado em: 2016-03
-
21. Adjusting the Sintering Cycle of a Hadfield Sintered Steel Produced by Metal Injection Molding
Processing of high manganese austenitic sintered steels present several challenges concerning thermodynamic reactions that occur during the sintering of these materials such as Mn oxidation, sublimation and even the formation of liquid phases or undesired compounds, e.g. grain boundary carbides. Therefore it is extremely important to adjust the sintering par
Mat. Res.. Publicado em: 17/11/2015
-
22. Study of Pipeline Steels with Acicular Ferrite Microstructure and Ferrite-bainite Dual-phase Microstructure
Three kinds of X70 steels with the same chemical composition and different microstructures fabricated by varying processes were compared in aspect of the microstructures and mechanical properties using SEM, TEM and tensile testing machine. The experimental results showed that the steel 1 with acicular ferritic microstructure fabricated by thermal-mechanical
Mat. Res.. Publicado em: 2015-02
-
23. Detection and on-line prediction of leak magnitude in a gas pipeline using an acoustic method and neural network data processing
Considering the importance of monitoring pipeline systems, this work presents the development of a technique to detect gas leakage in pipelines, based on an acoustic method, and on-line prediction of leak magnitude using artificial neural networks. On-line audible noises generated by leakage were obtained with a microphone installed in a 60 m long pipeline.
Braz. J. Chem. Eng.. Publicado em: 2014-03
-
24. Characterization and extraction of volatile compounds from pineapple (Ananas comosus L. Merril) processing residues
The aim of this study was to extract and identify volatile compounds from pineapple residues generated during concentrated juice processing. Distillates of pineapple residues were obtained using the following techniques: simple hydrodistillation and hydrodistillation by passing nitrogen gas. The volatile compounds present in the distillates were captured by
Food Sci. Technol. Publicado em: 2013-12