Furniture
Mostrando 13-24 de 217 artigos, teses e dissertações.
-
13. Does the Addition of Cotton Wastes Affect the Properties of Particleboards?
ABSTRACT A wide range of materials for the development of new products can be obtained from natural resources. Good examples of these materials are lignocellulosic wastes, which are a good alternative for the production of particleboards. This study aimed to evaluate the feasibility of using cotton wastes in association to eucalyptus particles in the produc
Floresta Ambient.. Publicado em: 04/04/2019
-
14. Hybrid Sandwich Particleboard Made with Sugarcane, Pínus Taeda Thermally Treated and Malva Fibre from Amazon
A multilayer particleboard panels, consisted of sugarcane bagasse reinforced composite as core material and hybrid composites made with Pinus taeda particles and Malva fibres as facing materials, were designed and evaluated in this work. Tukey test was used to identify the effect of the facing material, considering different combinations of Pinus taeda parti
Mat. Res.. Publicado em: 18/12/2017
-
15. Evaluation of Airborne MDF Dust Concentration in Furniture Factories
ABSTRACT High concentrations of airborne dust are observed during the cutting of medium density fiberboard (MDF) boards. This dust, at first considered just uncomfortable for workers, may be harmful to their health. The objective of this work was to evaluate the concentration of airborne dust during the cutting of medium density fiberboard (MDF). The experim
Floresta Ambient.. Publicado em: 16/10/2017
-
16. FULL CHARACTERIZATION OF CALYCOPHYLLUM MULTIFLORUM WOOD SPECIE
ABSTRACT: Wood is a material that for years has been used by man for a variety of purposes, particularly in rural and civil constructions and furniture industry. The possibility of shortages of some wood species, the characterization of other unfamiliar species is an alternative source for use in civil and rural construction. This study aimed to determine, w
Eng. Agríc.. Publicado em: 2017-08
-
17. Structuring front-end innovation activities throughout strategic product planning
Abstract Strategic product planning (SPP) for new product development (NPD) in the front-end of innovation (FEI) is a great challenge for managers and practitioners. This article analyzes the structuring process of FEI activities during SPP. A research was carried out with 78 industries from both food and furniture in Brazil. Our study revealed that FEI acti
Prod.. Publicado em: 27/07/2017
-
18. Retardantes de chama bromados: uma revisão
Polybrominated diphenyl ethers (PBDEs), Polybrominated biphenyls (PBBs), Hexabromocyclododecane (HBCD) and Tetrabromobisphenol A (TBBP-A) are flame retardant widely used in plastics, textiles, furniture, consumer electronics, automobiles, among others.They are important components added to retard the spread of flame and, thus,mitigate deaths and destruction
Quím. Nova. Publicado em: 2017-04
-
19. Carbapenem-resistant Acinetobacter baumannii contamination in an intensive care unit
Abstract INTRODUCTION: Acinetobacter baumannii is a major pathogen causing infections in intensive care units (ICUs). In this study, we aimed to evaluate the presence of A. baumannii in an ICU environment and gloves from ICU workers and to characterize the antimicrobial resistance of the isolates in comparison with those isolated from ICU patients at the sa
Rev. Soc. Bras. Med. Trop.. Publicado em: 2017-03
-
20. Developing a dynamic virtual stimulation protocol to induce linear egomotion during orthostatic posture control test
Abstract Introduction In this work, the effect of a dynamic visual stimulation (DS) protocol was used to induce egomotion, the center of pressure (COP) displacement response. Methods DS was developed concerning the scenario structure (chessboard-pattern floor and furniture) and luminance. To move the scenario in a discrete forward (or backward) direction,
Res. Biomed. Eng.. Publicado em: 10/10/2016
-
21. Particleboard Panels Made from Sugarcane Bagasse: Characterization for Use in the Furniture Industry
Abstract The objective of this study was to evaluate the physical and mechanical properties of commercial panels produced with sugarcane bagasse to investigate the possibility of us for the production of furniture. We evaluated industrial MDP (Medium density particleboard) panels made of Eucalyptus and Pinus by two Brazilian companies and an industrial MDP p
Mat. Res.. Publicado em: 18/07/2016
-
22. Materials Selection for Sustainable Executive Aircraft Interiors
This study proposes a methodological guide to explore and select materials for executive aircraft interiors, contributing toward a perspective of materials requirements, indicators and strategies to design more environmentally sustainable products. This was motivated by the signs from the aviation industry to reduce its environmental impact and the permanent
Mat. Res.. Publicado em: 11/03/2016
-
23. Cardanol-based thermoset plastic reinforced by sponge gourd fibers (Luffa cylindrica)
Abstract A growing global trend for maximum use of natural resources through new processes and products has enhanced studies and exploration of renewable natural materials. In this study, cardanol, a component of the cashew nut shell liquid (CNSL), was used as a building block for the development of a thermosetting matrix, which was reinforced by raw and mod
Polímeros. Publicado em: 04/03/2016
-
24. Prevention of the Evolution of Workers' Hearing Loss from Noise-Induced Hearing Loss in Noisy Environments through a Hearing Conservation Program
Introduction Noise-induced hearing loss (NIHL) is a serious problem for workers and therefore for businesses. The hearing conservation program (HCP) is a set of coordinated measures to prevent the development or evolution of occupational hearing loss, which involves a continuous and dynamic process of implementation of hearing conservation routines through
Int. Arch. Otorhinolaryngol.. Publicado em: 2016-03