Fuel Elements
Mostrando 13-24 de 45 artigos, teses e dissertações.
-
13. Simulação computacional em camisas de motor construídas em liga de alumínio silício
Automotive cylinder liners are mechanical components with the function of internal coating of the cylinder automotive engines. The liners have been made of cast iron, which meets the necessary requirements. The replacement of parts made of steel/ cast iron in aluminum alloys has been made with advantages not only in reducing weight as well as fuel consumptio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/09/2011
-
14. DEVELOPMENT OF A METHOD FOR MULTIELEMENTAL DETERMINATION IN BIODIESEL BY ICP-MS / DESENVOLVIMENTO DE MÉTODO PARA DETERMINAÇÃO MULTIELEMENTAR EM BIODIESEL POR ICP-MS
Biodiesel appeared in this scenario as an alternative short-term, compatible with the current technologies and without the necessity of major modifications. The elements of greatest interest are the residue of catalyst of the production process (Na, K), those limited by environmental regulations (S) and those that act like poisons for the catalyst system of
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/04/2011
-
15. DEVELOPMENT OF METHOD FOR DETERMINATION OF AS, SB AND SE IN BIODIESEL AND PETROLEUM BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY WITH SAMPLE INTRODUCTION BY HYDRIDE GENERATION (HG ICP / DESENVOLVIMENTO DE MÉTODO PARA DETERMINAÇÃO DE AS, SB E SE EM BIODIESEL E PETRÓLEO POR ICP OES COM INTRODUÇÃO DE AMOSTRA POR GERAÇÃO DE HIDRETOS
With the increasing world population and the consequent increasing in industrial activities and fuel consumption, chemical pollution has been a major problem of the XXI century. Alternatives that can minimize such problems are targets of researches, such as the use of biodiesel, a renewable and less polluting fuel. Elements usually found in low concentration
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/03/2011
-
16. Estudos de simulação computacional do processo de redução de UF4 a Urânio metálico / computational simulation studies of the reduction process of UF4 to metallic uranium
The production of metallic uranium is essential for production of fuel elements for using in nuclear reactors manufacturing of radioisotopes and radiopharmaceuticals. In IPEN, metallic uranium is produced by magnesiothermical reduction of UF4. This reaction is performed in a closed graphite crucible inserted in a sealed metal reactor and no contact with the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/12/2010
-
17. ESTUDO DA TRANSFORMAÇÃO DE FASES DAS LIGAS U-2,5Zr-7,5Nb E U-3Zr-9Nb TRATADAS TERMICAMENTE A 600 C E DA COMINUIÇÃO PELO PROCESSO DE HIDRETAÇÃO-DESIDRETAÇÃO / PHASE TRANSFORMATION STUDY OF THE U-2.5Zr-7.5Nb AND U-3Zr-9Nb ALLOYS ISOTHERMALLY TREATED AT 600 C AND OF THE COMMINUTION BY THE HYDRIDING-DEHYDRIGING PROCESS
O combustível nuclear metálico tipo placa em dispersão é um combustível versátil que pode ser projetado para ser utilizado tanto em reatores de testes quanto em reatores de potência. A elevada densidade das ligas metálicas de urânio com elementos de transição, como, Zr, Nb, Mo, etc, propicia o emprego deste combustível utilizando urânio com baix
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/06/2010
-
18. Cálculos neutrônicos, termo-hidráulicos e de segurança de um dispositivo para irradiação de miniplacas (DIM) de elementos conbustíveis tipo dispersão / Neutronic, thermal-hydraulics and accident analysis calculations of an miniplate irradiation device (MID) of dispersion fuel elements
Neste trabalho foram desenvolvidos calculos neutrônicos, termo-hidráulicos e de segurança para avaliar a seguranca operacional de um dispositivo de irradiação a ser colocado no núcleo do reator IEA-R1 do IPEN-CNEN/SP. Este dispositivo de irradiação é utilizado para alojar miniplacas de combustvel do tipo dispers~ao de U3O8-Al e U3Si2-Al, com 19,75%
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/04/2010
-
19. Metais pesados e micronutrientes no solo e em folhas de Brachiaria decumbens às margens de rodovias / Heavy metals and micronutrients in soil and in leaves of Brachiaria decumbens on the margins of highways
The generation of various wastes, has become alarming in light of their growing volume and their disposal to form inappropriate, especially in soil. One of the characteristics of such waste is the possibility of being contaminated by heavy metals. The Fuel obtained the refining of oil, widely used in automobiles, are usually enriched with toxic elements. The
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/02/2009
-
20. Intelligent system architecture for virtual sensing of oxygen in bi-fuel vehicle with electronic fuel injection / Arquitetura de sistema inteligente para sensoriamento virtual de oxigênio em veículos bicombustíveis com injeção eletrônica
The automotive industry is one of the most important sectors in Brazilians economy and in the world. In recent years, this industry has been forced to improve the performance of their produced vehicles and to reduce their costs. One of the landmarks of this transformation was the development of the oxygen sensor, which is one of the main elements of the engi
Publicado em: 2009
-
21. Influencia do teor de titanio no torneamento do ferro fundido vermicular / Influence of the titanium content in the turning of compacted graphite iron
Due to its good mechanical properties, the compacted (vermicular) graphite iron (CGI) has found a lot of applications in the automobilistic field. One of the applications is the production of high power diesel engine blocks that, due to the higher strength compared to the usual gray cast iron, allows the increase of the pressure inside the cylinder and, cons
Publicado em: 2009
-
22. Processamento Coloidal de Cromito de Lantânio / LANTHANUM CHROMITE COLLOIDAL PROCESSING
Lanthanum chromite (LaCrO3) is currently the most studied material for applications such as solid oxide fuel cell interconnector (HTSOFC). The complexity of microstructures and geometries of HTSOFC devices, require a precise control of processing parameters to get the desired combination of properties and this, the use of techniques involving concentrated ce
Publicado em: 2009
-
23. Desenvolvimento dos Processos de Cominuição, Passivação e Investigação da Cinética de Hidretação Massiva da Liga U-4Zr-2Nb Pelo Processo de Hidretação-Desidretação
Neste trabalho foram realizadas a cominuição e passivação da liga metálica U-4Zr-2Nb pelo processo de hidretação-desidretação, bem como o estudo da sua cinética. A obtenção deste material pulverizado através das técnicas da metalurgia do pó é uma etapa necessária e chave na fabricação da pastilha, que será empregada na laminação da plac
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 22/02/2008
-
24. Caracterização do resíduo sólido formado em motor automotivo à gasolina por meio de técnicas analíticas / CHARACTERIZATION OF SOLID DEPOSIT FORMED IN AUTOMOTIVE GASOLINE ENGINE BY THE ANALYTICAL TECHNIQUES
The main issues for solid deposit in engine are: high temperature that causes oil oxidation, bad quality fuel, dilution of fuel and combustion gases, low engine oil quality (recouped) and the engine oil not changed, but only completed up to the level required. The deposit is formed by a reaction to oxidation and heat (above 50- 60oC) can catalyze the process
Publicado em: 2008