Friction Coefficient
Mostrando 1-12 de 119 artigos, teses e dissertações.
-
1. Braden scale has low reliability in different patients under care in intensive care unit
SUMMARY OBJECTIVE: The aim of this study was to assess the inter-reliability of the Braden scale and its subscales for different patients assisted in the intensive care unit. We hypothesized that the Braden scale has low reliability in different populations. METHODS: This reliability study involved the Braden scale in intensive care unit of a hospital. A t
Revista da Associação Médica Brasileira. Publicado em: 2022
-
2. New Proposal to Calculate the Friction in Sheet Metal Forming Through Bending Under Tension Test
There are 6 different types of equations that have been formulated to measure friction through the bending under tension test, however, there is no work to show whether these calculations actually represent what is happening in a sheet metal stamping process. This paper aims to make a direct comparison between the bending under tension test and the sheet met
Mat. Res.. Publicado em: 20/01/2020
-
3. Mechanical behavior of PVD coatings deposited on ADI
ABSTRACT In this work, the mechanical behavior of the coated ADI system is studied. For this purpose, single layer Ti and bilayer Ti/TiN and TiAl/TiAlN coatings, with different thicknesses, were deposited by the PVD technique of cathodic arc deposition on high strength ADI substrates using industrial and experimental devices. The characterization of the coat
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Avaliação tribológica de óleos hidráulicos biodegradável e mineral com deslizamento entre as ligas de Cu-Zn e WC-CoCr
RESUMO A correta seleção dos óleos lubrificantes e das superfícies de contato melhoram o desempenho e reduzem o consumo de energia das máquinas Por isso, a engenharia de superfícies propõe novos revestimentos aos quais seu comportamento tribológico combinado com o uso de óleos biodegradáveis em componentes de sistema hidráulicos, não são conheci
Matéria (Rio J.). Publicado em: 25/11/2019
-
5. The Effects of Friction Coefficient on Formability Behaviour of Dual Phase Steel
The effects of friction coefficient on formability behavior of advanced high-strength steel sheets have been examined in this study. For this purpose, forming analysis has been conducted by stretching the three different steel sheets such as DP600, DP800 and DP1000. Forming processes have been done by using punch that has different friction coefficients (0.0
Mat. Res.. Publicado em: 14/11/2019
-
6. Effect of surface roughness and lubrication on the friction coefficient in deep drawing processes of aluminum alloy aa1100 with fem analysis
ABSTRACT Friction between the interface workpiece and tooling has considerable importance in sheet metal forming operations; an accurate description of the friction is necessary to analyze and design new workpieces and tooling. This work suggests a methodology to determine and evaluate the mean coefficient of friction (COF) using the Finite Element Method (F
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Evaluation of two-step transformation in Ni-rich titanium-nickel alloys using thermal and internal friction analyses
ABSTRACT The use of Ti-Ni memory alloys covers several fields of application such as medicine, dentistry, actuators, sensors among others. Because of the thermomechanical behavior of these materials, they are an object of continuous studies and their properties are related to the occurrence of thermoelastic martensitic phase transformations. The thermal anal
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Efeito do metal de adição na resistência ao desgaste por deslizamento de um aço estrutural soldado por GMAW
RESUMO O objetivo do presente trabalho foi avaliar o efeito do metal de adição na soldagem, e das microestruturas resultantes, na resistência ao desgaste de juntas soldadas de um aço estrutural ASTM A242, que possui resistência à corrosão atmosférica e é utilizado na fabricação de vagões destinados ao transporte de minério. As amostras foram sol
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Tribology of natural Poly-Ether-Ether-Ketone (PEEK) under transmission oil lubrication
Abstract High performance polymeric materials such as poly-ether-ether-ketone (PEEK) are increasingly being used for challenging tribological applications in order to replace metal parts in vehicle engines and transmissions. The tribology of natural PEEK, under oil-lubricated conditions, was studied for different metal counterbody finishes. Two different fin
Polímeros. Publicado em: 04/07/2019
-
10. Effect of surface roughness and lubrication on the friction coefficient in deep drawing processes of aluminum alloy aa1100 with fem analysis 1
ABSTRACT Friction between the interface workpiece and tooling has considerable importance in sheet metal forming operations; an accurate description of the friction is necessary to analyze and design new workpieces and tooling. This work suggests a methodology to determine and evaluate the mean coefficient of friction (COF) using the Finite Element Method (F
Matéria (Rio J.). Publicado em: 20/05/2019
-
11. Determination of Barreling of Aluminum Solid Cylinders During Cold Upsetting Using Genetic Algorithm
ABSTRACT This study presents Genetic Programming models for the formulation of barreling of aluminum solid cylinders during cold upsetting based on experimental results. The maximum and minimum radii of the barreled cylinders having different aspect ratio (d/h= 0.5, 1.0 and 2.0) were measured for various frictional conditions (m=0.1-0.4). The change in radii
Matéria (Rio J.). Publicado em: 20/05/2019
-
12. Boriding and boronitrocarburising effects on hardness,wear and corrosion behavior of AISI 4130 steel
ABSTRACT The effects of boriding and boronitrocarburising surface treatments on the microstructure and mechanical properties of AISI 4130 steel have been investigated. Pack boriding was carried out at 1223 K for 5 h and 8 h, while the double treatment of boronitrocarburising consisted of salt bath nitrocarburising at 853 K for 6 h followed by pack boriding a
Matéria (Rio J.). Publicado em: 20/05/2019