Forced Convection
Mostrando 1-12 de 47 artigos, teses e dissertações.
-
1. Freezing methods affect the characteristics of large yellow croaker (Pseudosciaena crocea): use of cryogenic freezing for long-term storage
Abstract Large yellow croaker (Pseudosciaena crocea) is the main coastal economic fish in China. After harvesting, the fish is rarely traded as the fresh product, but usually held in cold storage. Therefore, it is important to understand the quality changes occurring during preservation. In this study, freshly collected fishes were frozen by cryogenic (cabin
Food Sci. Technol. Publicado em: 2020-12
-
2. Analysis of the physical quality of genetically modified and conventional maize grains in the drying and wetting processes
RESUMO O objetivo deste trabalho foi avaliar a qualidade física dos grãos de milho geneticamente modificados (Herculex 30S31) em função dos processos de secagem e umedecimento em relação ao milho convencional (AG 1051). O delineamento experimental foi o inteiramente casualizado, com esquema fatorial (7x3x2), sete tempos de secagem ou umedecimento (0, 2
Rev. Ciênc. Agron.. Publicado em: 04/07/2019
-
3. Effects of drying air temperature and grain initial moisture content on soybean quality (Glycine Max (L.) Merrill)
ABSTRACT This study aimed to evaluate the effect of air-drying temperature and initial moisture content on volume shrinkage, physical quality and oil extraction yield of soybean grains. The grains used in this experiment were harvested at two distinct moisture levels of 19 and 25%. Then, these grains were taken to dryness at three different air temperatures
Eng. Agríc.. Publicado em: 2016-10
-
4. EFFECT OF ROTATION RATES ON THE LAMINAR FLOW AND HEAT TRANSFER PAST A CIRCULAR CYLINDER
AbstractIn this work, forced convection heat transfer past a rotating circular cylinder with a constant non-dimensional rotation rate α varying from 0 to 6 was investigated for Reynolds numbers of 20-200 and a Prandtl number of 0.7. The numerical calculations are carried out by using a finite-volume method based commercial computational fluid dynamics solve
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
5. DEVELOPMENT OF INSULATING MAGNETIC OIL FOR TRANSFORMERS
The Centrais Elétricas do Norte do Brasil AS – Eletronorte, as well as other companies in the world energy sector, have problems of loss of the performance by excessive heat and even accidents with their transformers. The maintenance and accidents impact of energy supply, generating profit and more expensive insurance premiums. The transformers are essent
Publicado em: 20/07/2014
-
6. Análise da convecção forçada no escoamento bidimensional laminar em dutos retangulares via GITT com variáveis primitivas. / Analysis of forced convection in two-dimensional laminar flow in rectangular ducts with via gitt primitive variables.
In the present study, forced convection flow in two-dimensional laminar simultaneous development pipeline with rectangular geometry, is analyzed analytically using the Navier-Stokes, Poisson and Energy in its primitive form. These equations are solved by the Generalized Integral Transform Technique, which is characteristic hybrid-numeric. The development wor
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/09/2012
-
7. Análise da convecção forçada no escoamento bidimensional laminar em dutos circulares em variáveis primitivas via GITT. / Analysis of the forced convection in the bidimensional laminar flow in circular ducts in primitive variable by GITT.
No presente trabalho a convecção forçada interna no escoamento laminar em desenvolvimento simultâneo é estudada aplicando a Técnica da Transformada Integral Generalizada para produzir um solução híbrida para os campos de velocidade, pressão e temperatura em dutos circulres. As equações da Continuidade, de Navier-Stokes, de Possion e da Energia s�
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/09/2012
-
8. Convecção forçada de partículas poliméricas em fase diluída : curvas de pressão e distribuição de partículas / Forced convection of polymer particles in dilute phase : pressure curves and the particle distribution
O deslocamento de polímeros, cereais, minérios, produtos farmacêuticos e outros materiais particulados no interior de tubulações, tendo como fluido transportador o ar, é denominado de transporte pneumático. Esta técnica é comumente dividida em transporte em fase densa, com concentração de partículas acima de 30% em volume e transporte em fase dil
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/03/2012
-
9. Wall effects on the cross-buoyancy around a square cylinder in the steady regime
The effects of blockage ratio on the combined free and forced convection from a long heated square obstacle confined in a horizontal channel are investigated in this work. The numerical computations are performed in the steady regime for Reynolds number = 1 - 30, Richardson number = 0 - 1 for blockage ratios of 0.125 and 0.25 for the fixed Prandtl number of
Brazilian Journal of Chemical Engineering. Publicado em: 2012-06
-
10. Conjugate Cooling of a Discrete Heater in Laminar Channel Flow
Electronic components are usually assembled on printed circuit boards cooled by forced airflow. When the spacing between the boards is small, there is no room to employ a heat sink on critical components. Under these conditions, the components’ thermal control may depend on the conductive path from the heater to the board in addition to the direct convecti
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2011-09
-
11. Análise da magnetohidrodinâmica com transferência de calor em canais de placas paralelas via transformação integral
O propósito do estudo desenvolvido nesse trabalho está relacionado com a dinâmica do escoamento incompressível, laminar, em regime permanente, com transferência de calor, de um fluido newtoniano condutor elétrico, no interior de um canal de placas planas paralelas, submetido a um campo magnético externo uniforme. Para a solução das equações de gov
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/11/2010
-
12. Resfriamento conjugado de aquecedores discretos em canais / Conjugate cooling of discrete heaters in channels
A transferência de calor conjugada por convecção forçada e condução de três aquecedores 2D montados rentes ou protuberantes na placa inferior (substrato) de um canal de placas paralelas foi investigada numericamente em regime permanente. Uma taxa uniforme de geração de calor foi assumida em cada aquecedor e seu resfriamento ocorreu por meio de um es
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 07/07/2010