Fluidized Reactors
Mostrando 1-12 de 33 artigos, teses e dissertações.
-
1. Structural Characteristics of Lignite Char from Different Pyrolysis Reactors and the Influence on Their Gasification Reactivity
The gasification reactivity of coal char is affected by numerous experimental variables, and char structure is one of the dominant factors. In this work, Raman spectroscopy, powder X-ray diffraction (XRD), and N2 adsorption were used to investigate the physical and chemical structure of char prepared under different pyrolysis conditions. Three kinds of pyrol
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Coating of urea granules by in situ polymerization in fluidized bed reactors
Abstract The main objective of the present work is to produce and characterize urea granules coated with polymers prepared with aqueous solutions of acrylic acid and glycerol. Both coating and drying of urea granules were performed in a fluidized bed reactor. Fourier transform infrared spectroscopy analyses indicated the presence of poly(acrylic acid) and ac
Polímeros. Publicado em: 21/03/2019
-
3. Role of Glutaraldehyde in Imparting Stability to Immobilized β-Galactosidase Systems
ABSTRACT This review article highlights the role of glutaraldehyde as a matrix activator/stabilizer in imparting higher operational and thermal stability to β-galactosidase (βG) for biotechnological applications. Glutaraldehyde has been used extensively as a crosslinking agent as well as for functionalization of matrices to immobilize β-galactosidase. Imm
Braz. arch. biol. technol.. Publicado em: 08/01/2018
-
4. COMPARISON OF UASB AND FLUIDIZED-BED REACTORS FOR SULFATE REDUCTION
Abstract Reactor hydrodynamics is important for sulfidogenesis because sulfate reduction bacteria (SRB) do not granulate easily. In this work, the sulfate reduction performance of two continuous anaerobic bioreactors was investigated: (i) an upflow anaerobic sludge blanket (UASB) reactor and (ii) a fluidized bed reactor (FBR). Organic loading, sulfate reduct
Braz. J. Chem. Eng.. Publicado em: 2015-03
-
5. Produção de hidrogênio e etanol em reator anaeróbio de leito fluidizado: avaliação do desempenho de três materiais suporte em diferentes condições operacionais
Hydrogen and ethanol production using microorganisms is a promising area of technological development from a wide variety of renewable and alternative to this production is the use of anaerobic fluidized bed reactor (AFBR). One of the factors that most influence the performance of the AFBR is the material support, which must provide abrasion resistance, poro
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/03/2012
-
6. Phenol degradation in an anaerobic fluidized bed reactor packed with low density support materials
The objective of this research was to study phenol degradation in anaerobic fluidized bed reactors (AFBR) packed with polymeric particulate supports (polystyrene - PS, polyethylene terephthalate - PET, and polyvinyl chloride - PVC). The reactors were operated with a hydraulic retention time (HRT) of 24 h. The influent phenol concentration in the AFBR varied
Brazilian Journal of Chemical Engineering. Publicado em: 2012-03
-
7. Parameter estimation for LLDPE gas-phase reactor models
Product development and advanced control applications require models with good predictive capability. However, in some cases it is not possible to obtain good quality phenomenological models due to the lack of data or the presence of important unmeasured effects. The use of empirical models requires less investment in modeling, but implies the need for large
Publicado em: 2011
-
8. Comparação dos processos de eletrodeposição de íons cobre usando reatores de leito fluidizado e leito de jorro
In this work was studied the process of removal of ions has covered simulated effluent gifts in watery having used electrochemical reactor of fluidized stream bed and of stream bed of I gush out whose porous cathodes were composites for conducting copper particles. Applying an factorial planning Box-Behnken the effect of the electric chain had been studied,
Publicado em: 2010
-
9. Experimental and theoretical investigation of anaerobic fluidized bed biofilm reactors
This work presents an experimental and theoretical investigation of anaerobic fluidized bed reactors (AFBRs). The bioreactors are modeled as dynamic three-phase systems. Biochemical transformations are assumed to occur only in the fluidized bed zone. The biofilm process model is coupled to the system hydrodynamic model through the biofilm detachment rate; wh
Brazilian Journal of Chemical Engineering. Publicado em: 2009-09
-
10. Caracterização de cinza obtida por combustão de casca de arroz em reator de leito fluidizado
The rice husk combustion in a bubbling and atmospheric fluidized bed reactor was investigated. This paper presents the rice husk ash characterization employing the techniques of X-ray diffraction (XRD), X-ray fluorescence (XRF), and scanning electron microscopy (SEM) among others. After combustion, a rice husk ash containing 93% amorphous silica and <3% unbu
Química Nova. Publicado em: 2009
-
11. A Study of the SO IND.2sorption by limestone in thermogravimetric analyser and coal combustion in fluidized bed / Um estudo da sorção de SO IND.2por calcário em analisador termogravimétrico e na combustão de carvão em leito fluidizado
This thesis investigates the sorption of SO IND.2by a brazilian dolomite in two different experimental setups: a thermogravimetric analyzer and an atmospheric bubbling fluidized bed coal combustor. The thermogravimetric experiments were carried out in conditions as close as possible to those observed in the fluidized bed combustion process. Intrinsic coeffic
Publicado em: 2008
-
12. Aplication of CFD techniques for he calculation of reacting flow in riser / Aplicação de tecnicas CFD para o calculo de escoamento em meio reativo em riser
A aplicação de Fluidodinâmica Computacional (CFD) em operações industriais vem aumentando sensivelmente, em razão desta auxiliar no projeto de novos equipamentos, bem como a otimização dos já existentes. O presente trabalho apresenta uma série de simulações tridimensionais, bifásicas e adiabáticas, utilizando-se o modelo de dois-fluidos para o
Publicado em: 2008