Fluidized Bed Combustor
Mostrando 1-5 de 5 artigos, teses e dissertações.
-
1. FBC desulfurization process using coal with low sulfur content, high oxidizing conditions and metamorphic limestones
A metamorphic limestone and a dolomite were employed as SO2 sorbents in the desulfurization of gas from coal combustion. The tests were performed in a fluidized bed reactor on a bench and pilot scale. Several parameters such as bed temperature, sorbent type, and sorbent particle size at different Ca/S molar ratios were analyzed. These parameters were evaluat
Publicado em: 2011
-
2. Effect of secondary air injection on the combustion efficiency of sawdust in a fluidized bed combustor
Agricultural wastes like bagasse, paddy husks, sawdust and groundnut shells can be effectively used as fuels for fluidized bed combustion; otherwise these biomass fuels are difficult to handle due to high moisture and fines content. In the present work the possibility of using sawdust in the fluidized bed combustor, related combustion efficiencies and proble
Brazilian Journal of Chemical Engineering. Publicado em: 2008-03
-
3. A Study of the SO IND.2sorption by limestone in thermogravimetric analyser and coal combustion in fluidized bed / Um estudo da sorção de SO IND.2por calcário em analisador termogravimétrico e na combustão de carvão em leito fluidizado
This thesis investigates the sorption of SO IND.2by a brazilian dolomite in two different experimental setups: a thermogravimetric analyzer and an atmospheric bubbling fluidized bed coal combustor. The thermogravimetric experiments were carried out in conditions as close as possible to those observed in the fluidized bed combustion process. Intrinsic coeffic
Publicado em: 2008
-
4. Desulfurization kinetics of coal combustion gases
Desulfurization of the gases from coal combustion was studied, using limestone (marble) as the sorbent in a fluidized-bed reactor. The kinetic parameter, k, was measured by analyzing the reduction in SO2 emissions in relation to time when a batch of limestone was introduced directly into the combustor chamber. The influence of sorbent composition and particl
Brazilian Journal of Chemical Engineering. Publicado em: 2003-06
-
5. Estudo experimental de uma valvula conica para controle da descarga de solidos em leito fluidizado
Feed valve are essential devices in gas-solid systems, in process as fluidized bed drying, pneumatic transport, coal combustion, biomass gasification and synthesis reactions in fluidized beds. All require a feed valve for the particulate solid to control the mass flow rate entering andlor leaving the processo. This work presents the development and the exper
Publicado em: 2001