Fluid Dynamics
Mostrando 25-36 de 466 artigos, teses e dissertações.
-
25. Modeling and hydraulic performance evaluation of a dripper device coupled to a branched water distribution network
Resumo A irrigação é responsável por aproximadamente 70% do consumo de água doce do mundo e é um dos principais fatores por trás da crescente escassez de água global. As técnicas e sistemas de irrigação são extremamente diferenciadas e complexas. Neste contexto, as ferramentas de dinâmica de fluidos computacional (CFD) ganham relevância, permit
Rev. Ambient. Água. Publicado em: 03/06/2019
-
26. Characterization of a pediatric rotary blood pump
Abstract Introduction A ventricular assist device (VAD) is an electromechanical pump used to treat heart failures. For designing the physiological control system for a VAD, one needs a mathematical model and its related parameters. This paper presents a characterization procedure for determining the model parameter values of the electrical, mechanical, and
Res. Biomed. Eng.. Publicado em: 29/11/2018
-
27. Design of Attitude Control Servomechanisms with Fluid Ring and CMG for Rigid Satellite
ABSTRACT: Satellites cover a wide range of space missions as remote sensing. Accomplishment of the mission depends on satellite's stability maintenance and direction. The main task of the attitude control system is to provide stability to the satellite against external disturbances. Such perturbations are caused due to aerodynamic drag, solar radiation and m
J. Aerosp. Technol. Manag.. Publicado em: 08/11/2018
-
28. Simulación matemática para la optimización del patrón de flujo entregado por una buza para el molde de colada continua de planchón delgado
ABSTRACT Understanding the behavior of the oscillations of the jets into the mold of thin slab funnel is essential to ensure a constant supply of liquid steel, improve control of the flow patterns and consequently increase plant productivity and the final product quality. To achieve this, we conducted a study of the effect of the internal design of the nozzl
Matéria (Rio J.). Publicado em: 19/07/2018
-
29. Diseño, simulación y análisis del proceso de extrusión de un perfil termoplástico en PVC rígido para optimizar el diseño de la matriz y los parámetros
ABSTRACT The objective of the present work was to verify and optimize the die design to manufacture a thermoplastic profile in rigid PVC using the simulation of the flow in the mentioned matrix through the use of Computational Fluid Dynamics (CFD) and through tests in extrusion, using an experimental calibrator, the required geometry and dimensions were obta
Matéria (Rio J.). Publicado em: 19/07/2018
-
30. Application of computational fluid dynamics on a study in swine facilities with mechanical ventilation system
ABSTRACT: Ventilation systems used in swine facilities deserve to be studied because they directly affect productivity in the pig farming sector. Bearing this in mind the uniformity of air distribution and temperature is essential to animal welfare in this breeding environment. Thus, the purpose of this study was to identify whether changes in air entrances
Sci. agric. (Piracicaba, Braz.). Publicado em: 2018-05
-
31. Microstructure and Flight Behaviors of Droplet and its Solidification in Twin-Wire Arc Sprayed Ni-Al Composite Coatings
Droplet flight and solidification behaviors during twin-wire arc sprayed (TWAS) composite coatings were systematically investigated. Both theoretical model and numerical method were established for calculating the droplet deformation, breakup and solidification process in air flow based on the volume of fluid (VOF) dual-phase flow model jointed with the stan
Mat. Res.. Publicado em: 19/03/2018
-
32. Numerical analysis of the liquid ejection due to the gaseous jet impact through computational fluid dynamics
Abstract Metal droplets generated by an impinging jet, play an important role in metal refining processes, mainly in oxygen steelmaking, where the droplets are ejected into the slag phase. Since the available interfacial area of droplets is very high in this process, the generated droplets enhance the rates of heat transfer and chemical reactions. Therefore,
REM, Int. Eng. J.. Publicado em: 2018-03
-
33. Aerothermodynamic Optimization of Aerospace Plane Airfoil Leading Edge
ABSTRACT: Aiming to mitigate the aerodynamic heating during hypersonic re-entry, the aerothermodynamic optimization of aerospace plane airfoil leading edge is conducted. Lift-to-drag ratio at landing condition is taken as a constraint to ensure the landing aerodynamic performance. First, airfoil profile is parametrically described to be more advantageous dur
J. Aerosp. Technol. Manag.. Publicado em: 02/10/2017
-
34. Discharge of Non-Reactive Fluids from Vessels
Abstract This paper presents simulations of discharges from pressure vessels that consistently account for non-ideal fluid behavior in all the required thermodynamic properties and individually considers all the chemical components present. The underlying assumption is that phase equilibrium occurs instantaneously inside the vessel and, thus, the dynamics of
Braz. J. Chem. Eng.. Publicado em: 2017-10
-
35. Convective recirculation effect on the selective non-catalytic reduction behavior in an industrial furnace
Abstract Selective non-catalytic reduction (SNCR) has become an important technique for reducing NOx emissions in industrial furnaces. The occurrence of convective recirculation can cause significant changes in SNCR performance. This paper presents the results of a study performed by Computational Fluid Dynamics (CFD) considering: (i) changes of initial NOX;
Braz. J. Chem. Eng.. Publicado em: 2017-10
-
36. Mathematical modeling of manganese adsorption onto bone char in a continuous fixed bed column incorporating backmixing and shriking core approaches
Abstract The present study investigated the dynamics of manganese adsorption onto bone char in a continuous fixed bed column using a mathematical model that incorporates: (i) the backmixing model to describe the fluid flow through the bed and (ii) the shrinking core model to describe the kinetic and mass transfer phenomena within spherical adsorbent particle
Braz. J. Chem. Eng.. Publicado em: 2017-07