Flue Gases
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. NUMERICAL SIMULATION OF COAL GASIFICATION IN A CIRCULATING FLUIDIZED BED GASIFIER
Abstract This paper presents a 3D full-loop simulation of a circulating fluidized bed gasifier. The model is validated with experimental results from the literature. The validated model is thereupon used to compare Bubbling Fluidized Bed (BFB) and Circulating Fluidized Bed (CFB) gasifiers to highlight the effect of a change in fluidization regime from bubbli
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
2. Harmonious interaction of incorporating CNTs and zeolitic imidazole frameworks into polysulfone to prepare high performance MMMs for CO 2 separation from humidified post combustion gases
Abstract Multi-walled carbon nanotubes (CNTs) and zeolitic imidazole frameworks (ZIF-301) were synergistically incorporated into glassy polysulfone (PSF) to prepare mixed-matrix membranes (MMMs) to separate CO2 from post combustion flue gas. The flexible MMMs rendering consistent distribution and improved adhesion of nanofillers with the polymer matrix were
Braz. J. Chem. Eng.. Publicado em: 2018-01
-
3. EFFECT OF SORBENT PORE VOLUME ON THE CARBONATION REACTION OF LIME WITH CO2
Abstract The reaction of calcium oxide with carbon dioxide is one of the most important methods for the capture and concentration of greenhouse gas from the flue gases of industrial plants. In this work, the carbonation reaction of CaO obtained from various sources with CO2 was investigated by a thermogravimetric method. These sources include commercial lime
Braz. J. Chem. Eng.. Publicado em: 2016-06
-
4. Estudo experimental das emissões de NOx na combustão de carvão mineral brasileiro em leito fluidizado rapido / Experimental study of NOx emissions from brazilian mineral coal combustion in fast fluidized bed
O objetivo deste trabalho é avaliar as emissões de óxidos de nitrogênio (NO + NO2) durante a combustão de carvão mineral com adição de calcário dolomítico como adsorvente em leito fluidizado circulante (LFC). As variáveis de influência estudadas foram o excesso de ar, que variou entre 18 e 32 %, e a relação molar cálcio enxofre (Ca/S) que vari
Publicado em: 2009
-
5. NUMERICAL INVESTIGATION OF AMINE BASED ABSORPTION PROCESSES FOR CARBON DIOXIDE CAPTURE IN CCS PROJECTS / INVESTIGAÇÃO NUMÉRICA DO PROCESSO DE SEPARAÇÃO DE DIÓXIDO DE CARBONO POR ABSORÇÃO COM AMINA PARA APLICAÇÃO EM PROJETO DE ARMAZENAMENTO DE CARBONO DE (CCS)
Absorption is a process where the components of a gaseous stream are separated through the use of a liquid solvent. The process may be simply physical or be followed by a chemical reaction. In industry, one of the most important absorption processes is the removal of carbon dioxide (CO2), by using an aqueous solution of monoethanolamine (MEA), from flue gase
Publicado em: 2009
-
6. A comparative kinetic study of SNCR process using ammonia
The paper presents comparative kinetic modelling of nitrogen oxides (NOx) removal from flue gases by selective non-catalytic reduction process using ammonia as reducing agent. The computer code SENKIN is used in this study with the three published chemical kinetic mechanisms; Zanoelo, Kilpinen and Skreiberg. Kinetic modeling was performed for an isothermal p
Brazilian Journal of Chemical Engineering. Publicado em: 2008-03
-
7. CinÃtica da reduÃÃo de NOx pelo Ãcido amino sulfÃmico: modelagem e desenvolvimento
Elevated levels of nitrogen oxides (NOX) from flue gases have recently become a major issue in industrial environment. This causes that the laws are becoming each time more demanding. The most employed reduction processes are: absorption by an aqueous acidic solution and catalytic gas-solid reduction. The nitrogen oxides absorbed into water leads to the form
Publicado em: 2006
-
8. Effects of wet CO oxidation on the operation of engines and power generators
A simplified method is used to determine the optimum water content in the flue gases of charcoal gasifiers to be utilized as alternative fuels in the operation of engines and gas turbines for power generation. Computational models of plug flow reactors and well stirred reactors are employed to simulate the reaction and post-flame zones, adopting different ch
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2003-12