Flow Laminar
Mostrando 1-12 de 203 artigos, teses e dissertações.
-
1. EXPERIMENTAL AND NUMERICAL ANALYSIS OF CHAOTIC ADVECTION AS AN EFFICIENT APPROACH TO MAXIMIZE HOMOGENEOUS LAMINAR MIXING IN A BATCH MIXER
Abstract In the present work, the impacts of effective parameters on the mixing of Stokes flows in a chaotic batch mixer are numerically and experimentally studied. The batch mixer consists of a container and two circular rotors where the rotors can rotate independently. To investigate the possibility of improving the mixing, the effect of non-constant speed
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
2. Aperfeiçoamento de modelo de estimativa da eficiência de remoção de turbidez da água em floculadores tubulares helicoidais
RESUMO Estudos científicos têm demonstrado que os floculadores tubulares helicoidais (FTHs) têm alta eficiência na formação de flocos e baixo tempo de retenção hidráulica, quando comparados aos floculadores comumente usados em tratamento de água e esgoto. No entanto, sua aplicação prática é limitada, pois ainda existe demanda significativa por
Eng. Sanit. Ambient.. Publicado em: 12/08/2019
-
3. Investigation of a NACA0012 Finite Wing Aerodynamics at Low Reynold’s Numbers and 0º to 90º Angle of Attack
ABSTRACT: The aerodynamic characteristics of a NACA0012 wing geometry at low Reynold’s numbers and angle of attack ranging from 0º to 90º are investigated using numerical simulations and the results are validated by wind tunnel experiments. Further experiments are conducted at low Reynold’s numbers of 1 × 105, 2 × 105 and 3 × 105. Findings of the st
J. Aerosp. Technol. Manag.. Publicado em: 28/03/2019
-
4. Growth, water consumption and basil production in the hydroponic system under salinity
ABSTRACT In irrigated crops, salinity is the main cause of the reduction of growth and productivity, with damage of the variability according to the sensitivity of the crop. The objective of this work was to evaluate the growth, water consumption and production of basil cv. Toscano Folha de Alface under saline stress, in different frequencies of recirculatio
Rev. Ceres. Publicado em: 2019-02
-
5. Improvement of Airfoils Aerodynamic Efficiency by Thermal Camber Phenomenon at Low Reynolds Number
ABSTRACT: In this research, viscous, laminar and steady flow around symmetric and non-symmetric airfoils is simulated at Low Reynolds Number (LRN). Navier-Stokes (N-S) equations are discretized by Finite Volume Method (FVM) and are solved by the SIMPLE algorithm in an open source software, namely OpenFOAM. The main objective of this paper is the introduction
J. Aerosp. Technol. Manag.. Publicado em: 01/11/2018
-
6. Analog Models of Flanking Structures and a Natural Example in the Quadrilátero Ferrífero, Minas Gerais
ABSTRACT The aim of this study is to present analog models of flanking structures and to analyze the Fábrica Nova synform, Quadrilátero Ferrífero, Minas Gerais, from a geometric point of view. We set up seven models using a linear viscous silicone and produced flanking structures with a shear velocity of 2 cm h-1. At different initial orientations with re
An. Acad. Bras. Ciênc.. Publicado em: 31/07/2017
-
7. Detailed Numerical Study on the Aerodynamic Behavior of a Gurney Flapped Airfoil in the Ultra-low Reynolds Regime
ABSTRACT: The addition of Gurney flap changes the nature of flow around airfoil by producing asymmetric Von-Karman vortex in its wake. Most of the investigations on Gurney flapped airfoils have modeled the flow using a quasi-steady approach, resulting in time-averaged values with no information on the unsteady features of the flow. Among these, some investig
J. Aerosp. Technol. Manag.. Publicado em: 2017-06
-
8. Two-dimensional Flow of Power-law Fluids over a Pair of Cylinders in a Side-by-Side Arrangement in the Laminar Regime
Abstract This manuscript presents the effect of Reynolds number (Re) and proximity of the bodies on the hydrodynamics of flow of shear-thinning, Newtonian and shear-thickening fluids over a pair of cylinders kept in side-by-side arrangement. Results obtained from the numerical simulations carried out with a combination of different parameters in the range of
Braz. J. Chem. Eng.. Publicado em: 2017-04
-
9. THE EFFECT OF SURFACTANT AND HIGH MOLECULAR WEIGHT POLYMER ADDITION ON PRESSURE DROP REDUCTION IN PIPE FLOW
Abstract The main aim of this paper is to present a possibility to enhance the drag reduction effect in straight pipe flow by the simultaneous addition to the transported liquid of a small amount of high molecular weight polymers and surfactants. Qualitative analysis of the polymer-micellar additive influence on the shape and character of flow resistance cur
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
10. Growth rates of dynamic dermal model exposed to laminar flow and magnetic fields
Abstract Introduction Ongoing research in the use of electromagnetic stimulation as coadjuvant in fracture healing has led the authors to begin generating computer models in order to predict cellular growth changes when cells are electromagnetically stimulated. By generating these models, scientists will be able to better understand how electromagnetic fiel
Res. Biomed. Eng.. Publicado em: 18/03/2016
-
11. DETERMINATION OF THE EFFECTIVE RADIAL THERMAL DIFFUSIVITY FOR EVALUATING ENHANCED HEAT TRANSFER IN TUBES UNDER NON-NEWTONIAN LAMINAR FLOW
AbstractEnhanced heat transfer in tubes under laminar flow conditions can be found in coils or corrugated tubes or in the presence of high wall relative roughness, curves, pipe fittings or mechanical vibration. Modeling these cases can be complex because of the induced secondary flow. A modification of the Graetz problem for non-Newtonian power-law flow is p
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
12. EFFECT OF ROTATION RATES ON THE LAMINAR FLOW AND HEAT TRANSFER PAST A CIRCULAR CYLINDER
AbstractIn this work, forced convection heat transfer past a rotating circular cylinder with a constant non-dimensional rotation rate α varying from 0 to 6 was investigated for Reynolds numbers of 20-200 and a Prandtl number of 0.7. The numerical calculations are carried out by using a finite-volume method based commercial computational fluid dynamics solve
Braz. J. Chem. Eng.. Publicado em: 2015-06