Flow And Pressure Transducers
Mostrando 1-12 de 20 artigos, teses e dissertações.
-
1. ENERGY EFFICIENCY OF A CENTER PIVOT IRRIGATION SYSTEM
ABSTRACT This study aimed to evaluate the energy efficiency of a center pivot irrigation system operating in a terrain of variable topography. Values of Pumping Energy Efficiency (PEE), Supply Energy Efficiency (SEE), Global Energy Efficiency (GEE) and Specific Energy (Es in kWh m-3) computed at 18 different angular positions of the lateral line were used as
Eng. Agríc.. Publicado em: 2018-04
-
2. Mepiquat chloride application on cotton at variable rate.
Mepiquat chloride (1.1 - dimethylpiperidinium chloride) are used to control excessive vegetative growth in cotton (Gossypium hirsutum L.) broadcast sprayed by ground or air. As proven by previous researches the variability of the cotton plants height in the field is large enough to justify the application of Mepiquat at variable rate. The major advantages of
INTERNATIONAL CONFERENCE ON PRECISION AGRICULTURE. Publicado em: 2011
-
3. Experimental investigation of the liquid volumetric mass transfer coefficient for upward gas-liquid two-phase flow in rectangular microchannels
The gas-liquid two-phase mass transfer process in microchannels is complicated due to the special dynamical characteristics. In this work, a novel method was explored to measure the liquid side volumetric mass transfer coefficient kLa. Pressure transducers were utilized to measure the pressure variation of upward gas-liquid two-phase flow in three vertical r
Brazilian Journal of Chemical Engineering. Publicado em: 2010-12
-
4. Atualização de sistema duplicador de pulsos para teste de proteses de valvulas cardiacas / Upgrade of a pulse duplicator system for cardiac valve prostheses evaluation
It has become very frequent the use of mechanic or biological cardiac valve prostheses. These prostheses must be evaluated (in vitro and in vivo tests) in order to be used clinically. The hydrodynamic performance tests are carried out in vitro. The analyses of the test results are very important for the characterizations and classification of a given prosthe
Publicado em: 2008
-
5. Avaliação da perda de carga e do fator de atrito no escoamento de fluidos de perfuração em geometrias circular e anulares concêntricos / Load loss and friction factor in the disposal of drilling fluids in circular geometry and concentric rings
The constant search for new technologies of drilling oil wells has reinforced the research and development of drilling fluids and the specific study of their disposal, particularly with regard to the load loss caused by the different geometries. Within this context, this study focused on the load loss and friction factor in the disposal of the drilling fluid
Publicado em: 2008
-
6. Estudo experimental de um controle adaptativo para um sistema de refrigeração / Experimental study of a refrigeration system using an adaptative control
This research deals with a experimental study of vapor compression refrigeration system, with variable speed compressor using adaptative fuzzy control, comparing its results with On-Off and PI control. The experimental equipment used is composed of a semi-hermetic compressor, concentric tube evaporator and condenser, thermostatic expansion valve with manual
Publicado em: 2006
-
7. Estudo experimental de um controle adaptativo para um sistema de refrigeraÃÃo / Experimental study of a refrigeration system using an adaptative control
This research deals with a experimental study of vapor compression refrigeration system, with variable speed compressor using adaptative fuzzy control, comparing itâs results with On-Off and PI control. The experimental equipment used is composed of a semi-hermetic compressor, concentric tube evaporator and condenser, thermostatic expansion valve with manua
Publicado em: 2006
-
8. Determinação experimental do fluxo térmico em um corpo rombudo em regime hipersônico com adição de energia à montante / Experimental heat flux to a blunt body in hypersonic flow with upstream laser energy deposition
Due to the high heat transfer rates which takes place in hypersonic flight and the consequent necessity of prohibitively massive thermal protection equipment, new methods of flow control are required to enable flight in such regimes. Here arises the Direct Energy Air Spike concept, where electromagnetic energy (laser/microwaves) is focalized upstream of the
Publicado em: 2005
-
9. DESENVOLVIMENTO DE TRANSDUTORES A FIBRA ÓPTICA PARA COMPLETAÇÃO INTELIGENTE DE POÇOS / DEVELOPMENT OF OPTICAL FIBER TRANSDUCERS FOR INTELLIGENT WELL COMPLETION
Optical fibers are finding a growing range of new applications in the petroleum industry, which include, not only those already well established in telecommunications, but also in novel sensing technologies. Possibility of dense multiplexing, continuous distributed measurements, long distances between measurement points and electronic circuits, and explosion
Publicado em: 2004
-
10. Detecção de vazamentos em tubulações atraves da analise espectral de transientes de pressão
The development and test of a technique for leak detection in pipelines is presented. The technique is based on the spectral analysis of pressure signals measured in pipeline sections where the formation of stationary waves is favoured, allowing leakage detection during the start stop of pumps. Experimental tests were performed in a 1250 m long pipeline for
Publicado em: 2002
-
11. Horizontal Slug Flow in a Large-Size Pipeline: Experimentation and Modeling
The knowledge of the slug flow characteristics is very important when designing pipelines and process equipment. When the intermittences typical in slug flow occurs, the fluctuations of the flow variables bring additional concern to the designer. Focusing on this subject the present work discloses the experimental data on slug flow characteristics occurring
Journal of the Brazilian Society of Mechanical Sciences. Publicado em: 2001
-
12. Leak detection in pipelines through spectral analysis of pressure signals
The development and test of a technique for leak detection in pipelines is presented. The technique is based on the spectral analysis of pressure signals measured in pipeline sections where the formation of stationary waves is favoured, allowing leakage detection during the start/stop of pumps. Experimental tests were performed in a 1250 m long pipeline for
Brazilian Journal of Chemical Engineering. Publicado em: 2000-12