Flame Retardant
Mostrando 1-12 de 12 artigos, teses e dissertações.
-
1. EVALUATION OF MECHANICAL AND FLAME RETARDANT PROPERTIES OF MEDIUM DENSITY FIBERBOARD USING ARTIFICIAL NEURAL NETWORK
ABSTRACT The present study presents the application of artificial neural network (ANN) to predict the modulus of rupture (MOR) and mass loss (ML) of the fire retarded fiberboard. Hence, the effect of adding the fire retardants including boric acid, borax and ammonium sulfate was evaluated on MOR and ML of fiberboard manufactured at different press temperatur
CERNE. Publicado em: 2020-06
-
2. ESTUDO CINÉTICO DE DECOMPOSIÇÃO TÉRMICA DE ESPUMAS RÍGIDAS DE POLIURETANO POR REDE NEURAL ARTIFICIAL
Kinetic models of solid thermal decomposition are traditionally used for individual fit of isothermal experimental data. However, this methodology presents unacceptable errors in some regions of the data. To solve this problem, a neural network was adopted in this work. The implemented algorithm uses the rate constants as predetermined weights between the in
Quím. Nova. Publicado em: 2017-10
-
3. Retardantes de chama bromados: uma revisão
Polybrominated diphenyl ethers (PBDEs), Polybrominated biphenyls (PBBs), Hexabromocyclododecane (HBCD) and Tetrabromobisphenol A (TBBP-A) are flame retardant widely used in plastics, textiles, furniture, consumer electronics, automobiles, among others.They are important components added to retard the spread of flame and, thus,mitigate deaths and destruction
Quím. Nova. Publicado em: 2017-04
-
4. Principal Component Analysis of Commercial Tannin Extracts Using Digital Images on Mobile Devices
Tannins from trees are an abundant renewable resource. The use of tannins is safe for the environment and human health, making it possible to develop environmentally friendly products, such as adhesives, flocculant agents for water treatment, flame retardant foams and anticorrosives. In this study, a methodology was developed for the identification of six co
J. Braz. Chem. Soc.. Publicado em: 2016-12
-
5. Processamento de placas de circuito impresso de equipamentos eletroeletrônicos de pequeno porte
A hydrometallurgical process applicable to printed circuit boards of small electrical and electronic devices was developed. This involved three leaching steps (60 ºC, 2 h): 6 mol L-1 NaOH, 6 mol L-1 HCl and aqua regia. NaOH removed the resin and flame retardant that covered the circuit boards. HCl dissolved the most electropositive metals and a small amount
Quím. Nova. Publicado em: 2013
-
6. Estudo da flamabilidade e resistência à chama de compósito de poliéster insaturado e fibra da folha do abacaxizeiro (PALF)
Na presente pesquisa foram desenvolvidos compósitos com fibras da folha do abacaxizeiro (PALF - Pineapple Leaf Fiber), utilizando resina de poliéster insaturado como matriz, incorporando retardante de chama em diferentes composições. As fibras da folha do abacaxizeiro foram obtidas na ramada 4 do município de Ielmo Marinho no Estado do Rio Grande do Nor
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/08/2011
-
7. Synthesis of a boron modified phenolic resin
Abstract: Phenolic resin has long been used as matrix for composites mainly because of its flame retardant behavior and high char yield after pyrolysis, which results in a self supporting structure. The addition of ceramic powders, such as SiC and B4C, as fillers to the phenolic resin, results in better thermo-oxidative stability, but as drawbacks, it has po
J. Aerosp. Technol. Manag.. Publicado em: 2010-08
-
8. Decision support method to apply Additive Manufacturing Technologies for plastic components in the aircraft industry
Additive Manufacturing Technologies (AMT) are a collection of manufacturing processes driven by CAD data to produce physical models and parts by means of additive techniques. They are based on a layer-by-layer material consolidation process instead of the traditional methods. Due to machine and material developments, such processes may be used to produce fin
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/11/2009
-
9. Estudo das caracteristicas de inflamabilidade de polimeros utilizados na construção civil e industria de transportes / Study of flammability characteristics of polymers used in buildings and automobile industry
The polymer materials are being used in several applications. The great number of existent monomers, as well as the possibility of copolymers synthesis, polymeric alloys formulation and the composites and nanocomposites show that it is possible to obtain materials with different specific properties and for being used in different application areas. However,
Publicado em: 2008
-
10. Development and characteriztion of PP/flame retardant filler compositions. / Desenvolvimento e caracterização de composições polipropileno/cargas retardantes de chama.
The main objective of this study was to develop and characterize polypropylene modified with flame retardant fillers. Two flame retardant fillers (Aluminum Hydroxide and Magnesium Hydroxide) were incorporated into four distinct types of polypropylene, two of which were homopolymers and two copolymers. The contents of the flame retardant fillers were 40 and 6
Publicado em: 2004
-
11. Utilization of Magnesium Hydroxide Produced by Magnesia Hydration as Fire Retardant for Nylon 6-6,6
The present work investigates the use of magnesium hydroxide, produced by magnesia hydration, as a fire retardant in polymers. The hydration was carried out in an autoclave, at temperature of 130°C for 1 hour, and the product was further submitted to cominution in a jet mill. The solids were characterized with regard to their chemical composition, particle
Polímeros. Publicado em: 2001-09
-
12. Anaerobic-Aerobic Process for Microbial Degradation of Tetrabromobisphenol A
Tetrabromobisphenol A (TBBPA) is a flame retardant that is used as an additive during manufacturing of plastic polymers and electronic circuit boards. Little is known about the fate of this compound in the environment. In the current study we investigated biodegradation of TBBPA, as well as 2,4,6-tribromophenol (TBP), in slurry of anaerobic sediment from a w
American Society for Microbiology.