Finite Element Analysis
Mostrando 13-24 de 754 artigos, teses e dissertações.
-
13. Optical Fiber Coupler Analysis Using Daubechies Wavelets
Abstract This article presents the theoretical analysis of a signal coupling between a proposed Photonic Crystal Fiber (PCF) and a Conventional Fiber with Step Index (CFSI) system. In this analysis, the Finite Element Method (FEM) and Beam Propagation Method (BPM) are applied together with Daubechies wavelets as basis function and described in the mathematic
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
14. Optimization of geometrically nonlinear truss structures under dynamic loading
Abstract The goal of this article is to present the formulation of the optimization problem of truss structures with geometric nonlinearity under dynamic loads and provide examples of this problem. The formulated optimization problem aims to determine the cross-sectional area of the bars that minimizes the weight of the structure, imposing constraints on nod
REM, Int. Eng. J.. Publicado em: 2020-09
-
15. Bearing failure in bolted sleeve connections with circular hollow sections under compression
Abstract This article analyzes sleeve connections between circular hollow sections. This type of connection is composed of two tubes connected by bolts to an inner tube with a smaller diameter, and explores the efficiency, aesthetics and resistance of hollow sections subjected to tension and compression. In previous researches, sleeve connections with aligne
REM, Int. Eng. J.. Publicado em: 2020-06
-
16. Effect of Plasma Arc Welding on Residual Stress and Distortion of Thin Titanium Sheet
In this research work, a finite element model is developed to predict the temperature field and residual stress during plasma arc welding of thin Ti-6Al-4V sheets. Dhinakaran’s heat source model which is based on Parabolic Gaussian distribution is used to predict the temperature field and Anand’s model is used to predict the residual stress. Numerical si
Mat. Res.. Publicado em: 20/01/2020
-
17. Simulation of Stress Distribution on the Upper First Molar and Alveolar Bone with the Transpalatal Arch and Upper Second Molar Using Finite Element Analysis
Abstract Objective: To evaluate the differences in the stress distribution on the upper first molar with and without transpalatal arch and a second molar when a 150 g force is applied during canine distalization using finite element analysis. Material and Methods: We constructed several models with data obtained by scanning human skulls using cone beam com
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 13/01/2020
-
18. Effect of Suture on Mechanical Properties of Stitched Thermal Protection Sandwich
This paper investigates the tensile properties and bending performances of stitched thermal protection structure in engineering, and the effect of stitching density on mechanical properties, via a model of ceramic-aerogel stitched sandwich. With the help of ANSYS, titanium alloy bottom plate was added to the bottom surface of the thermal protection structure
Mat. Res.. Publicado em: 13/01/2020
-
19. Large Displacement Static Analysis of Composite Elliptic Panels of Revolution having Variable Thickness and Resting on Winkler-Pasternak Elastic Foundation
Abstract Nonlinear static response of laminated composite Elliptic Panels of Revolution Structure(s) (EPRS) having variable thickness resting on Winkler-Pasternak (W-P) Elastic Foundation is investigated in this article. Generalized Differential Quadrature (GDQ) method is utilized to obtain the numerical solution of EPRS. The first-order shear deformation th
Lat. Am. j. solids struct.. Publicado em: 20/12/2019
-
20. Numerical analysis of torsional tangent rigidity of reinforced concrete waffle slab
Resumo Este trabalho de investigação científica aborda a análise da rigidez tangente à torção de lajes nervuradas de concreto armado por meio de comparações da análise numérica com resultados de ensaios experimentais, cujo cálculo foi feito no programa ATENA. Tal programa foi desenvolvido especialmente para cálculo de estruturas de concreto arma
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
21. Avaliação dos processos de fratura em filmes finos através da simulação de ensaios de indentação com penetradores esféricos
RESUMO Recentes trabalhos propõem a utilização dos ensaios de indentação como uma ferramenta capaz de avaliar características mecânicas de filmes finos, assim como avaliar possíveis falhas em sistemas que conjugam filmes de alta dureza depositados em substratos metálicos em solicitações tribológicas. Entretanto, a implementação da técnica de i
Matéria (Rio J.). Publicado em: 25/11/2019
-
22. Structural models for analysis of reinforced concrete frame buildings with masonry infills
Resumo Este trabalho tem como objetivo o estudo do comportamento de pórticos de edifícios de concreto armado preenchidos com alvenaria frente às ações horizontais, empregando-se dois modelos estruturais: i) modelo de diagonal equivalente (MDE) e ii) modelo com elementos finitos bidimensionais para estado plano de tensões (MEF). No primeiro modelo, a al
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
23. Nonlinear static analysis of a pile-supported wharf
Resumo O objetivo deste artigo é desenvolver uma análise estática não-linear através de um estudo de caso de um cais sobre estacas situado em uma nova área portuária para petroleiras. A atividade sísmica da área é muito intensa com uma aceleração máxima do solo de 0.55 g. Por esta razão, é muito importante analisar o comportamento estrutural n
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
24. Nonlinear numerical analysis of composite slabs with steel decking
Resumo O comportamento das lajes mistas é governado pelo cisalhamento longitudinal na interface entre o aço e o concreto, que é desenvolvido em lajes sob flexão simples. O método m-k e o método da interação parcial, utilizados no cálculo da resistência ao cisalhamento na interface aço-concreto de lajes mistas, são baseados em ensaios experimentai
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019