Fine Sand
Mostrando 1-12 de 117 artigos, teses e dissertações.
-
1. Pressed roofing tile based on cementitious material and basalt powder: Technological and toxicological characterization
Abstract This study aims to develop a pressed concrete roofing tile from powder technology containing basalt powder in substitution of fine sand (aggregate) for application in building covers. Specimens were submitted to technological and toxicological characterization. Hence, pressed specimens based on cement and basalt powder were analyzed. In the bending
REM - International Engineering Journal. Publicado em: 2022
-
2. The BigFLUX Magnetic Matrix Technology
Abstract The Magnetic separation of ultra-fine ore particles has always posed a challenge to the JONES/WHIMS process. Despite many advances in this technology, no effective improvement has been made to its core component: The Magnetic Matrix. The current approach to separate ultra-fine particles teaches that the gap of the matrix and its teeth size must be s
REM - International Engineering Journal. Publicado em: 2022
-
3. Influence of the physical characteristics of sand and the crushed filler content on the properties of self-leveling mortars
Abstract The properties of self-leveling mortars (SLMs) in the fresh and hardened state are strongly affected by their formulation. In this study, the influence of three different quartz sands (different physical characteristics) was investigated in SLMs, as well as the replacement of these sands by crushed basalt filler. The tests performed were: spreading,
Cerâmica. Publicado em: 2021-06
-
4. Evaluation of mortars produced with Baosteel slag short flow (BSSF) steel slag as fine aggregate
Abstract The objective was to evaluate the influence of Baosteel slag short flow (BSSF) steel slag, a byproduct of a Brazilian steel mill, as a fine aggregate on the properties of fresh state and on the compressive strength of mortars. The experimental work was to characterize the BSSF steel slag and to produce simple mortars (only cement) and mixed mortars
Cerâmica. Publicado em: 2021-03
-
5. Interrill erodibility of different sandy soils increases along a catena in the Caiuá Sandstone Formation
ABSTRACT Soil erosion in tropical areas is a major problem for sustainability in agriculture and soil stability. In the Northwest of Paraná, cassava crop is produced using a conventional tillage system along a catena consisting of different soil classes: Ferralsols (near the summit), Lixisols (mid-slope), and Arenosols (foot-slope). Therefore, differential
Rev. Bras. Ciênc. Solo. Publicado em: 17/01/2020
-
6. PAPAYA SEEDLING PRODUCTION UNDER DIFFERENT SHADING LEVELS AND SUBSTRATE COMPOSITIONS
ABSTRACT Papaya is characterized as one of the most important crops in Brazil. Thus, good quality seedlings are essential for formation of orchards in agricultural production. This study aimed to evaluate shading levels and substrate compositions for production of papaya seedlings. Growing environments were evaluated with 0, 18, 35, and 50% shading and subst
Eng. Agríc.. Publicado em: 09/12/2019
-
7. Water retention capacity in Arenosols and Ferralsols in a semiarid area in the state of Bahia, Brazil
Abstract: One of the most serious problems in areas indicated for irrigation projects in the Brazilian Northeast region is the occurrence of sandy soils, known to have low moisture retention, but occurring in strategic locations in terms of water supply and geographical situation, and which can be used for agricultural purposes. The objective of this study
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
8. Lightweight high-strength concrete with the use of waste cenosphere as fine aggregate
RESUMO Cenosfera é um sub-produto da combustão do carvão que apresenta interessantes propriedades para ser usado na produção de materiais cimentícios, tais como estrutura oca, baixa densidade, baixa térmica condutividade e notável estabilidade térmica. Além disso, ela mostra reatividade pozolânica na cura térmica. Entretanto, o potencial da cenos
Matéria (Rio J.). Publicado em: 25/11/2019
-
9. Composição granulométrica do filtro ascendente para pós-tratamento de lixiviado de aterro sanitário
RESUMO O lixiviado de aterro sanitário apresenta composição variável e complexa e pode ter elevadas concentrações de nitrogênio amoniacal e matéria orgânica biodegradável e recalcitrante. Devido ao potencial altamente poluidor dos lixiviados estabilizados, além do tratamento biológico convencional, faz-se necessária, em alguns casos, a realizaç
Eng. Sanit. Ambient.. Publicado em: 22/07/2019
-
10. PEDOGENESIS ON COASTAL TABLELANDS AREA WITH LOW RANGE ALTIMETRY IN PARAÍBA STATE
RESUMO Pequenas variações de relevo influenciam na drenagem e no escoamento superficial, contribuindo para a formação de horizontes superficiais arenosos e subsuperficiais endurecidos (fragipãs e, ou, duripãs) em solos dos Tabuleiros Costeiros. Este trabalho investigou a pedogênese em área de Tabuleiros Costeiros com baixa amplitude altimétrica no E
Rev. Caatinga. Publicado em: 18/07/2019
-
11. Incorporação de lodo de estação de tratamento de água (ETA) como agregado miúdo em concretos: avaliação das propriedades físico-mecânicas
RESUMO O presente trabalho tem como objetivo principal investigar a potencialidade do emprego de lodo de estação de tratamento de água (ETA) moído e calcinado em substituição ao agregado miúdo em concretos de cimento Portland, assim evitando o descarte em aterros sanitários e se tornando uma possível alternativa de reutiliza-ção desse material. Fo
Matéria (Rio J.). Publicado em: 13/06/2019
-
12. Efeitos do uso de areia de praia nas propriedades de argamassas mistas: análise da variação granulométrica
RESUMO Devido ao alto consumo de areia de rio na construção civil e sua extração abusiva, cujos resultados são a geração de diversos impactos ambientais, este estudo analisa a influência da utilização de areia de praia em substituição à areia proveniente de leito de rio na produção de argamassas de revestimento. A partir da areia de rio, foram
Matéria (Rio J.). Publicado em: 10/06/2019