Filter Approach
Mostrando 1-12 de 141 artigos, teses e dissertações.
-
1. Design and Implementation of Microwave Dual-Band Pass Interdigital Filter Using an Analytical Approach
Abstract In this paper, benefiting from frequency transformation between the normalized frequency domain of low-pass prototype frequencies and the real frequency domain of the filter, a purely analytical procedure for dual-band filter design is used. The coupling matrix of the filter is analytically extracted, without the need to perform numerical optimizati
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Spectrofluorimetric Determination of Hydrochlorothiazide by a Carbon Dots-Based Probe via Inner Filtering Effect and Resonance Rayleigh Scattering
Synthesis of carbon dots (CDs) from natural resources not only enables green synthesis and production of environmentally friendly materials, but also provides a cost-effective probe as a fluorescence nanosensor. The proposed sensor introduces a unique one-pot hydrothermal CDs synthesis from alfalfa leaves, which is promising for sensing hydrochlorothiazide (
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. ELECTRICAL NOISES REDUCTION IN NANOPORES EXPERIMENTS BASED ON CONSENSUS FILTER
Nanopore has developed into an indispensable tool for single molecules experiments, where useful information about the characteristics of DNA/RNA can be obtained from the flowing of ionic current elicited by individual molecules as they traverse a single nanometer-scale aperture. However, due to the relatively high background current noise and low measuremen
Quím. Nova. Publicado em: 20/07/2020
-
4. A Novel Tri-bandpass Filter Side-coupled Square Ring Based
Abstract This work presents the design of a tri-bandpass filter based on the side-coupled square ring structure. The modeling is conceived from the classic approach of coupled transmission lines. The geometry consists of a square structure of electrical length equal to twice the wavelength of the main operating frequency, and the laterally coupled lines thro
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
5. Use of a combined SVD-Kalman filter approach for induction motor broken rotor bars identification
Abstract This paper describes a new parametric spectral estimator for the identification of rotor bar fault of an induction motor by analyzing the stator current. This approach combines two methods: The first one, the Singular Value Decomposition method which allows the accurate detection and location of the fault's signature frequency. The second method all
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-03
-
6. Enhancing quality in Diffusion Tensor Imaging with anisotropic anomalous diffusion filter
Abstract Introduction: Diffusion tensor imaging (DTI) is an important medical imaging modality that has been useful to the study of microstructural changes in neurological diseases. However, the image noise level is a major practical limitation, in which one simple solution could be the average signal from a sequential acquisition. Nevertheless, this approac
Res. Biomed. Eng.. Publicado em: 12/09/2017
-
7. Use of fluorescent oligonucleotide probes for differentiation between Paracoccidioides brasiliensis and Paracoccidioides lutzii in yeast and mycelial phase
BACKGROUND Fluorescence in situ hybridisation (FISH) associated with Tyramide Signal Amplification (TSA) using oligonucleotides labeled with non-radioactive fluorophores is a promising technique for detection and differentiation of fungal species in environmental or clinical samples, being suitable for microorganisms which are difficult or even impossible
Mem. Inst. Oswaldo Cruz. Publicado em: 2017-02
-
8. A COMPARATIVE STUDY BETWEEN ARTIFICIAL NEURAL NETWORK AND SUPPORT VECTOR MACHINE FOR ACUTE CORONARY SYNDROME PROGNOSIS
ABSTRACT Despite medical advances, mortality due to acute coronary syndrome remains high. For this reason, it is important to identify the most critical factors for predicting the risk of death in patients hospitalized with this disease. To improve medical decisions, it is also helpful to construct models that enable us to represent how the main driving fact
Pesqui. Oper.. Publicado em: 2016-08
-
9. An Extended Kalman Filter-Based Technique for On-Line Identification of Unmanned Aerial System Parameters
ABSTRACT: The present article deals with the identification, at the same time, of aircraft stability and control parameters taking into account dynamic damping derivatives. Such derivatives, due to the rate of change of the angle of attack, are usually neglected. So the damping characteristics of aircraft dynamics are attributed only on pitch rate derivative
J. Aerosp. Technol. Manag.. Publicado em: 2015-09
-
10. An Approach to Outlier Detection and Smoothing Applied to a Trajectography Radar Data
ABSTRACT: The tracking of aerospace engines is reasonably achieved through a trajectography radar system that generally yields a disperse cloud of samples on tridimensional space, which roughly describes the engine trajectory. It is proposed an approach on cleaning radar data to yield a well-behaved and smooth output curve that could be used as basis for ins
J. Aerosp. Technol. Manag.. Publicado em: 2014-09
-
11. Relative Motion Guidance, Navigation and Control for Autonomous Orbital Rendezvous
ABSTRACT: In this paper, the dynamics of the relative motion problem in a perturbed orbital environment are exploited based on Gauss' variational equations. The relative coordinate frame (Hill frame) is studied to describe the relative motion. A linear high fidelity model is developed to describe the relative motion. This model takes into account primary gra
J. Aerosp. Technol. Manag.. Publicado em: 2014-09
-
12. Kinetic study of the enzymatic hydrolysis of sugarcane bagasse
This work presents a kinetic study of the enzymatic hydrolysis of three cellulosic substrates: filter paper (FP), used as a low recalcitrance substrate model; steam exploded sugarcane bagasse (SB); and weak acid pretreated SB (1:20 dry bagasse:H2SO4 solution 1% w/w), the last two delignified with 4% NaOH (w/w). The influence of substrate concentration was as
Braz. J. Chem. Eng.. Publicado em: 2013-09