Field Emission
Mostrando 25-36 de 287 artigos, teses e dissertações.
-
25. Emissions of Nitrous Oxide and Methane in a Subtropical Ferralsol Subjected to Nitrogen Fertilization and Sheep Grazing in Integrated Crop-Livestock System
ABSTRACT Brazilian agriculture contributes significantly to nitrous oxide (N2O) and methane (CH4) emissions, so the understanding of such emissions at the field is crucial for mitigation strategies. This study quantified the impact of N application and sheep grazing on the N2O and CH4 emissions from a subtropical Ferralsol under an integrated crop-livestock
Rev. Bras. Ciênc. Solo. Publicado em: 19/06/2019
-
26. Y3+ substituted Sr-hexaferrites: sol-gel synthesis, structural, magnetic and electrical characterization
Resumo Hexaferritas de estrôncio com adição de Y3+ com composição química SrYxFe12-xO19 (x= 0,0, 0,5, 1,0, 1,5) foram sintetizadas com sucesso pelo método sol-gel com autocombustão. Os estudos estruturais e morfológicos das amostras preparadas foram investigados usando a técnica de difração de raios X, espectroscopia de energia dispersiva, micros
Cerâmica. Publicado em: 06/06/2019
-
27. Balanço de Energia, Emissão Foliar e Eficiência do Uso da Radiação pela Cana-de-Açúcar em Cultivo sem e com Palhada
Resumo Nas últimas décadas houve mudança no sistema de colheita e manejo da palhada em canaviais de todo o Brasil, visando atender a legislação vigente e reduzir custos. A deposição de resíduos culturais sobre o solo, contudo, modifica as características micrometeorológicas do ambiente. Este trabalho reporta um estudo conduzido em Juazeiro-BA, para
Rev. bras. meteorol.. Publicado em: 30/05/2019
-
28. DEVELOPMENT OF AN AUTOMATED METHOD TO PERFORM A QUANTITATIVE STUDY OF PARTICLE SIZE DISTRIBUTION AND THE EFFECT OF A CONDUCTIVE LAYER IN SCANNING ELECTRON MICROSCOPY
The determination of particle size distribution is an important parameter for controlling industrial processes, particularly in the field of pharmaceuticals. It is also an important parameter for characterizing nanoparticles. The best technique for determining particle size distribution is scanning electron microscopy. The process of counting particles is ty
Quím. Nova. Publicado em: 27/05/2019
-
29. Avaliação comparativa da pegada de carbono de margarina e manteiga produzidas no Sul do Brasil
RESUMO A avaliação de ciclo de vida (ACV) é uma técnica de estimativa de impactos ambientais, como emissão de gases de efeito estufa (CO2eq), para geração de produto ou realização de processo. O objetivo deste estudo foi estabelecer a pegada de carbono para a produção da margarina e da manteiga com uso das normas ISO e PAS aplicadas a uma empresa
Eng. Sanit. Ambient.. Publicado em: 25/04/2019
-
30. Nitrous Oxide Emissions in No-Tillage Onion ( Allium cepa L.) Crops Are Increased by Oilseed Radish Cover Crop and Poultry Manure Application
ABSTRACT The use of cover crops and poultry manure (PM) is an alternative to reduce the use of synthetic inputs and can contribute to the nutrient cycling in onions ( Allium cepa L.) grown under a no-tillage system. However, this management practice may contribute to an increase in N2O emissions to the atmosphere. The aims of this study were to evaluate the
Rev. Bras. Ciênc. Solo. Publicado em: 15/04/2019
-
31. Characterization of hibiscus sabdariffa fiber as potential reinforcement for denture acrylic resins
ABSTRACT This study aimed to determine the characteristics of Hibiscus sabdariffa as a fiber-reinforcement material for denture acrylic resins. The Hibiscus sabdariffa fiber was extracted by hot water retting. The fiber was treated at room temperature in aqueous solution of NaOH for 8 hours at 8% concentration. Micrometre gauge and Field emission scanning el
Matéria (Rio J.). Publicado em: 06/12/2018
-
32. Ag@Activated Carbon Felt Composite as Electrode for Supercapacitors and a Study of Three Different Aqueous Electrolytes
The main challenge for the development of a high efficiency supercapacitor is the electrode material. Developing electrode materials with high specific electrical capacitance and low electrical resistance enables an increase in the energy accumulated in the device. In addition, it is expected that the electrode material presents a simple procedure for prepar
Mat. Res.. Publicado em: 08/11/2018
-
33. Poly (Methyl Methacrylate)-SiC Nanocomposites Prepared Through in Situ Polymerization
In this study, polymeric nanocomposites based on poly(methyl methacrylate) (PMMA) and silicon carbide (SiC) nanoparticles were prepared by radical mass polymerization in the presence of filler. Nanoparticles of SiC with and without surface treatment with organosilane were obtained .The nanocomposites were characterized by X-ray fluorescence (XRF), infrared s
Mat. Res.. Publicado em: 03/09/2018
-
34. Synthesis and characterization of nanostructured TiO2 and TiO2/W thin films deposited by co-sputtering
ABSTRACT Nanostructured TiO2 and TiO2/W thin films were deposited on Corning glass substrates by RF and DC magnetron co-sputtering at room temperature, using three targets of TiO, Ti and W. After deposition, samples were subjected to an annealing treatment in air at 500 °C for 3 hrs. The effect of the annealing treatment and tungsten addition to the TiO2 ma
Matéria (Rio J.). Publicado em: 19/07/2018
-
35. Synthesis, Characterization, and Photocatalytic Properties of Flower-like Mn-doped Ceria
Mn-doped CeO2 flower-like microstructures have been synthesized by a facile one-step composite-hydroxide-mediated method. The structure, morphology, optical and the surface properties of Mn doped CeO2 have been investigated by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), UV-Vis absorption spectroscopy and X-ray photoelectron
Mat. Res.. Publicado em: 16/07/2018
-
36. Enhancing the Supercapacitive and Superparamagnetic Performances of Iron Oxide Nanoparticles through Yttrium Cations Electro-chemical Doping
A one-pot electrosynthesis platform is reported for fabrication of Y3+ doped iron oxide nanoparticles (Y-IONPs). In this procedure, Y-IONPs are electro-deposited from an additive-free aqueous solution of iron(III) nitrate, iron(II) chloride and yttrium chloride. The analysis data provided by X-ray diffraction (XRD), field emission electron microscopy (FE-SEM
Mat. Res.. Publicado em: 10/07/2018