Ferrite
Mostrando 37-48 de 233 artigos, teses e dissertações.
-
37. Caracterización del comportamiento frente a la corrosión en soldaduras de recargue de aceros inoxidables superdúplex
ABSTRACT Superduplex stainless steels have a dual structure constituted approximately by 50% of ferrite and 50 % of austenite. This fact produces a good combination of mechanical properties and corrosion resistance. Thanks to these features their use is growing, mainly in the industries of paper, chemical, gas and oil. Surfacing welding is used for the manuf
Matéria (Rio J.). Publicado em: 19/07/2018
-
38. Síntesis y estudio de propiedades estructurales y magnéticas de ferritas Mg1-xZnxFe2O4 (x= 0-0,9)
ABSTRACT Nowadays, iron oxide based magnetic nanoparticles are used in several science and technology applications due to their magnetic properties. Likewise, these materials are used in biomedical applications such as contrast agents for magnetic resonance imaging, magnetic hyperthermia, targeted drug delivery, etc. In this work, the synthesis and character
Matéria (Rio J.). Publicado em: 19/07/2018
-
39. Carbon Distribution in Ferritic-Martensitic Fe-Cr-C Alloys
Carbon distribution in Fe-Cr-C alloys with a variety of Cr concentrations is studied based on internal friction, optical and transmission-electron microscopy. It is found that the carbon distribution strongly depends on initial microstructure, being ferritic or ferritic/martensitic, which is determined by the thermal treatment, and Cr and carbon concentratio
Mat. Res.. Publicado em: 28/05/2018
-
40. Fonoaudiologia na Atenção Básica no Brasil: análise da oferta e estimativa do déficit, 2005-2015
RESUMO Objetivo: investigar a evolução e estimar o déficit da oferta da Fonoaudiologia na Atenção Básica entre 2005-2015. Métodos: neste estudo ecológico misto, foram utilizados dados do Cadastro Nacional de Estabelecimentos em Saúde e do Sistema de Informação da Atenção Básica para análise descritiva da evolução do número de fonoaudiólo
Rev. CEFAC. Publicado em: 2018-05
-
41. Tunable Magnetic and Electrical Properties of Cobalt and Zinc Ferrites CO1-XZnXFe2O4 Synthesized by Combustion Route
Co and Zn ferrites with general formula CO1-XZnXFe2O4 (x = 0; 0,2 and 0,8) were synthesized by combustion reaction method, using urea as fuel. The structure of inverse-spinel-type ferrite were characterized through XRD using Rietveld refinement method to identify, quantify phases and determine lattice parameters. The crystallites had mean size of 37,33 nm, 4
Mat. Res.. Publicado em: 12/03/2018
-
42. Mechanical, Magnetic, and Microstructural Characterization of Ni0.9Co0.1Fe2O4 Produced by the Ceramic Method
Ni-Co ferrites, especially the ones with lower cobalt fractions, are candidate materials for applications in magnetomechanical sensors and electromagnetic wave absorbers. This work studied the microstructure, magnetostriction, flexural strength, and complex magnetic permeability of Ni0.9Co0.1Fe2O4, presenting data that weren't covered by previous literature
Mat. Res.. Publicado em: 22/02/2018
-
43. Mechanical and Metallurgical Characterization of Laser Welding on P91 Ferritic Steel and Incoloy 800HT Dissimilar Joints
In this work, microstructural characterization and mechanical properties of P91 and Incoloy 800HT dissimilar laser beam welded joint were analyzed. In addition to that, metallographical studies were conducted using Optical microscopy, Scanning electron microscopy (SEM) equipped with Energy-dispersive X-ray spectroscopy (EDX) and X-Ray diffraction analysis (
Mat. Res.. Publicado em: 01/02/2018
-
44. Preparation and Characterization of Nickel ferrite Nanoparticles via Co-precipitation Method
Nickel ferrite (NiFe2O4) nanoparticles were synthesized using co-precipitation method. The X-ray diffraction (XRD) pattern was used to determine the structure of NiFe2O4 nanoparticles. The presence of NiFe2O4 nanoparticles was confirmed by the FT-IR spectrum. The details of the surface morphology of NiFe2O4 nanoparticles were obtained by Scanning Electron Mi
Mat. Res.. Publicado em: 22/01/2018
-
45. Effects of Local Heat Input Conditions on the Thermophysical Properties of Super Duplex Stainless Steels (SDSS)
The properties of the super duplex stainless steels (SDSS) are strongly affected by the thermal history imposed by welding procedures. The controlled dual phase microstructure (ferrite and austenite) guarantee excellent mechanical properties such as mechanical strength and corrosion resistance, in addition to small thermal expansion coefficient and high ther
Mat. Res.. Publicado em: 11/01/2018
-
46. Influence of heat treatments on the microstructure and degree of sensitization of base metal and weld of AISI 430 stainless steel
ABSTRACT AISI 430 is a non-stabilized ferritic stainless steel grade with carbon content lower than 0.12%.After hot and cold rolling this material is annealed. The slow cooling after soaking at temperatures between 900oC and 1000oC promotes the formation of a high quantity of carbides and nitrides, while the rapid cooling partially suppresses the formation o
Matéria (Rio J.). Publicado em: 08/01/2018
-
47. In Situ Synchrotron Radiation Measurements During Axial Strain In Hydrogen Cathodically Charged Duplex Stainless Steel SAF 2205
The objective of this work is the evaluation of hydrogen effects on the martensitic transformation and strain hardening in Duplex Stainless Steels (DSS) SAF 2205 (UNS S32205/S31803). DSS are two-phase alloys (austenite and ferrite), which are used for applications requiring high mechanical strength, in corrosive environments. Therefore, it is necessary a bet
Mat. Res.. Publicado em: 18/12/2017
-
48. Qualidade do registro de dados sobre acidentes de trabalho fatais no Brasil
RESUMO OBJETIVO Avaliar a qualidade do registro de dados sobre acidentes de trabalho fatais no Brasil nos Sistema de Informação sobre Mortalidade (SIM) e Sistema de Informação de Agravos de Notificação para acidentes de trabalho grave (Sinan-AT), analisando a distribuição espacial e temporal entre 2007 e 2012. MÉTODOS Identificaram -se os campos r
Rev. Saúde Pública. Publicado em: 11/12/2017