Feed Efficiency
Mostrando 1-12 de 386 artigos, teses e dissertações.
-
1. A Design of a Compact Microwave Diplexer in Microstrip Technology Based on Bandpass Filters Using Stepped Impedance Resonator
Abstract This paper describes the design of a compact microstrip microwave diplexer based on bandpass filters and a stepped impedance resonator for 4G applications. The diplexer is composed of two band-pass filters (BPF) that operate at 1.8 and 2.5 GHz. Both bandpass filters for the receiver at 1.705-1.895 GHZ and the transmitter at 2.41-2.6 GHZ have a -3dB
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Compact, Broadband, and Omnidirectional Antenna Array for Millimeter-Wave Communication Systems
Abstract In this paper, a millimeter-wave printed quadrupole antenna is proposed. It consists of two symmetric printed dipoles that make the quadrupole radiating power omnidirectionally. Such an arrangement eliminates the influence of the ground as reflector. Simulation results show that the quadrupole antenna exhibits a broad impedance bandwidth and an enha
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
3. Metamaterial-Fractal-Defected Ground Structure Concepts Combining for Highly Miniaturized Triple-Band Antenna Design
Abstract In this paper, a novel method is proposed to increase the gain and radiation efficiency of a compact patch antenna. By employing a combination of three efficient techniques, we have developed a multi-resonance L-DGS antenna with a high gain of 5 dB and an efficiency of 99.6%. Furthermore, a novel compact Double Negative metamaterial unit cell and it
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-12
-
4. THEORETICAL ANALYSIS AND EXPERIMENTAL STUDY ON THE PROCESS OF CONVEYING AGRICULTURAL FIBER MATERIALS BY SCREW CONVEYORS
ABSTRACT To improve the conveying efficiency and working stability of a screw conveyor, the feeding methods, running conditions and flow characteristics of materials were studied by theoretical analysis and experiments. The theoretical analysis results show that the screw conveyor runs more stably when the helix angle of the screw blade is equal to the movin
Eng. Agríc.. Publicado em: 2020-10
-
5. Posicionamento – Protocolo de Reconexão dos Serviços de Cardiologia com os Pacientes Durante a Pandemia de COVID-19 – 2020
ABSTRACT To improve the conveying efficiency and working stability of a screw conveyor, the feeding methods, running conditions and flow characteristics of materials were studied by theoretical analysis and experiments. The theoretical analysis results show that the screw conveyor runs more stably when the helix angle of the screw blade is equal to the movin
Arq. Bras. Cardiol.. Publicado em: 2020-10
-
6. Associação entre eficiência alimentar e ganho em acabamento de carcaça de bovinos da raça Nelore
RESUMO Objetivou-se estimar a associação fenotípica entre a eficiência alimentar e o ganho em acabamento de carcaça de touros jovens da raça Nelore. Utilizaram-se informações de 98 touros jovens da raça Nelore, participantes de duas provas de eficiência alimentar que empregaram o sistema de cochos eletrônicos Growsafe®, as quais foram realizadas
Arq. Bras. Med. Vet. Zootec.. Publicado em: 13/12/2019
-
7. ENERGY AND EXERGETIC EVALUATION OF THE MULTICOMPONENT SEPARATION OF PETROCHEMICAL NAPHTHA IN FALLING FILM DISTILLATION COLUMNS
Abstract Multicomponent separation of synthetic petrochemical naphtha (hexane, cyclohexane, toluene and xylene) was carried out in a falling film distillation sequence with heat supply using a vapor chamber (thermosyphon). Tests were carried out by varying feed flow rate and temperatures of the feed and the vapor chamber in two ways of heat supply: isotherma
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
8. Efeito da Adição de Propileno aos Gases de Proteção Convencionais na Soldagem GMAW Aplicada a Juntas de Topo e Ângulo
Resumo O presente trabalho teve por objetivo avaliar a adição de 1,3% de C3H6 ao CO2 puro e 0,6% de C3H6 à mistura de Ar+25%CO2, na soldagem de aço carbono utilizando o processo Gas Metal Arc Welding (GMAW) aplicado em juntas de topo com chanfro em V e ângulo em T. As soldas foram realizadas utilizando chapas de aço SAE 1020, arame de solda ER70S-6 de
Soldag. insp.. Publicado em: 02/12/2019
-
9. Effect of Artemisia apiacea Hance on growth performance, cecal opportunistic bacteria, and microbicidal peptides in rabbits
ABSTRACT This study aimed to investigate the effect of Artemisia apiacea Hance supplementation on growth performance, cecal opportunistic bacteria, and antimicrobial defense using 120 rabbits. There were four experimental diets containing a control and A. apiacea Hance added at doses of 25, 50, and 75 g kg−1 of feed. The trial lasted for 70 days. The resul
R. Bras. Zootec.. Publicado em: 28/11/2019
-
10. Red clover silage: an alternative for mitigating the impact of nitrogen excretion in ovine production systems
ABSTRACT The objective was to quantify the flow of intestinal nutrients and nitrogen excretion and retention in sheep receiving isoproteic diets. Eight Texel x Lacaune wethers (average body weight = 25±2.5 kg) were fitted with duodenal cannula and housed in metabolic cages. Wethers were assigned to the treatments in a crossover design with two periods of 20
R. Bras. Zootec.. Publicado em: 25/11/2019
-
11. Available Phosphorus Levels in Diets for Muscovy Ducks in Housing
ABSTRACT The present study aimed to determine ideal levels of available phosphorus for muscovy ducks in housing. Two hundred and forty muscovy ducks of creole lineage were used, distributed in boxes with water and food ad libitum. The experimental design was completely randomized with treatments consisting of six nutritional plans that included the initial,
Braz. J. Poult. Sci.. Publicado em: 14/11/2019
-
12. Evaluation of an herbal choline feed plant additive in lamb feedlot rations
ABSTRACT An experiment was carried out to evaluate the effect of an herbal choline feed plant additive on the productive parameters and blood metabolites of finishing lambs. Forty male Hampshire × Suffolk lambs (initial body weight of 30.36±3.75 kg) were assigned according to a completely randomized design. Treatments consisted of dietary inclusion of the
R. Bras. Zootec.. Publicado em: 11/11/2019