Failure Mode
Mostrando 1-12 de 237 artigos, teses e dissertações.
-
1. MÉTODO DE TRIAGEM DE MICROGININAS EM CIANOBACTÉRIAS POR LC-MS/MS
Cyanobacteria produce a wide variety of bioactive compounds, making them a highly promising group in the search for novel molecules with pharmacological and biotechnological properties. Among these, microginins attract attention for being peptides which inhibit angiotensin-converting enzyme, turning them into potential targets for hypertension and congestive
Quím. Nova. Publicado em: 2020-12
-
2. Comparative effects of final canal irrigation with chitosan and EDTA
Abstract Chitosan is a natural, biocompatible chelating substance with potential for dental use. This study compared the effects of final canal irrigation with chitosan and EDTA on dentin microhardness, sealer dentin tubules penetration capacity, and push-out strength. Methodology: Fifty canine roots were distributed according to the final irrigation protoc
J. Appl. Oral Sci.. Publicado em: 28/11/2019
-
3. Bond strengths of various resin cements to different ceramics
Abstract This study evaluates the shear bond strength (SBS) of various resin cements to different ceramics. Composite resin cylinders of Z100 were fabricated and cemented to disks of feldspathic ceramic (Creation), leucite-reinforced feldspathic ceramic (Empress I), and densely sintered aluminum oxide ceramic (Procera AllCeram) using five resin cements: Pana
Braz. oral res.. Publicado em: 14/10/2019
-
4. Effect of Magnification during Post Space Preparation on Root Cleanness and Fiber Post Bond Strength
Resumo Avaliar o efeito do método de visualização durante o preparo do espaço do pino sobre o remanescente de material obturador endodôntico e sobre a resistência adesiva do pino de fibra de vidro. Trinta incisivos centrais superiores humanos com canal radicular circular foram selecionados, foram desobstruídos a 15 mm e obturados. Os dentes foram divi
Braz. Dent. J.. Publicado em: 07/10/2019
-
5. Bond Stability of Universal Adhesives Applied To Dentin Using Etch-And-Rinse or Self-Etch Strategies
Resumo Este estudo avaliou a resistência de união à dentina imediata e após 6 meses de adesivos universais utilizando estratégias de união convencional ou autocondicionante. Os adesivos testados foram Ambar Universal, G-Bond, Single Bond Universal, Tetric N-Bond Universal e Ybond Universal. Adesivos padrão-ouro (Scotchbond Multipurpose Plus e Clearfil
Braz. Dent. J.. Publicado em: 07/10/2019
-
6. Microstructure and Fracture of 50Mo-50Re Vacuum Brazed with Fe-Si-B Filler Metal
Microstructural evolution, interfacial reaction and fracture during vacuum brazing of 50Mo-50Re alloys using amorphous alloy Fe-5.6Si-2.6B(wt%) were investigated. A binary intermetallic compound, σ(Mo2Re3) formed as parallel contiguous layers in the diffusion zone. In addition, Fe from the braze alloy, in combination with dissolved Mo from the substrate, fo
Mat. Res.. Publicado em: 30/09/2019
-
7. STRESS, DISPLACEMENT JOINTS OF GMELINA ARBOREA AND TECTONA GRANDIS WOOD WITH METAL PLATES, SCREWS AND NAILS FOR USE IN TIMBER TRUSS CONNECTIONS
ABSTRACT In countries like Costa Rica, there is an interest in developing wooden trusses in a versatile and light way. However, there is a key aspect in the behavior of truss connections in this product. Therefore, the present study determines the structural behavior of the truss connections and the displacement, the resistance, the stiffness values and the
CERNE. Publicado em: 09/09/2019
-
8. Fracture Load and Failure Mode of CAD-on Ceramic Structures
Resumo Este estudo avaliou a carga de fratura (Cf) e o modo de falha de estruturas cerâmicas fabricadas pela técnica CAD-on (Ivoclar Vivadent), testando as hipóteses de que a Cf das estruturas multicamadas é governada pela resistência da cerâmica de cobertura e o lascamento é mais frequente nas estruturas em multicamadas do que em monolíticas. Corpos
Braz. Dent. J.. Publicado em: 22/07/2019
-
9. Seismic Upgrading of Exterior Reinforced Concrete Frame with Small Column and Joint Area Using Externally Attached Steel Column
Abstract This paper presents cyclic load test of five exterior reinforced concrete frames. All the specimens represent a substandard single-span, low-rise reinforced concrete frame building which behaves a weak column-strong beam mechanism under a strong seismic loading. The first three exterior frames M1, M2 and M3 were designed for the joint shear critical
Lat. Am. j. solids struct.. Publicado em: 10/07/2019
-
10. Preventive risk analysis in the maintenance of patency of the peripherally inserted central catheter
RESUMO Este estudo teórico-reflexivo analisou os riscos relacionados ao processo de manutenção da permeabilidade do Cateter Central de Inserção Periférica, com o uso de solução salina em comparação com seringa preenchida com solução salina, por meio da aplicação da ferramenta Healthcare Failure Mode and Effect Analysis - HFMEA. O processo foi m
Rev. esc. enferm. USP. Publicado em: 04/07/2019
-
11. Experimental analysis on the combined effects of corrosion and fatigue in reinforced concrete beams
Resumo Elementos de infraestrutura, especialmente as pontes e viadutos de concreto armado, estão expostos a uma combinação de processos de degradação enquanto em serviço, como a corrosão de armaduras e fadiga. Os efeitos combinados de ambos os processos são conhecidos por serem mais prejudicais para a estrutura quando comparados à soma de ambos os p
Ambient. constr.. Publicado em: 10/06/2019
-
12. Cyclic fatigue resistance of novel Genius and Edgefile nickel-titanium reciprocating instruments
Abstract: This study aimed to assess the cyclic fatigue resistance of Genius and EdgeFile X1 reciprocating instruments compared with WaveOne Gold Primary. Twenty Genius (Ultradent) 25.04, 20 Genius 30.04, 20 EdgeFile X1 (EdgeEndo) and 20 WaveOne Gold Primary (Dentsply Maillefer) instruments were included in this study and tested in a static cyclic fatigue te
Braz. oral res.. Publicado em: 11/04/2019