Extrusion Processing
Mostrando 1-12 de 62 artigos, teses e dissertações.
-
1. Micronization and extrusion processing on the physicochemical properties of dietary fiber
RESUMO: A fibra alimentar desempenha importante papel fisiológico, o qual está diretamente ligado às suas propriedades físico-químicas de capacidade de retenção de água, ligação ao óleo e a cátions. Estas propriedades podem ser alteradas empregando-se métodos enzimáticos, químicos e físicos. Métodos enzimáticos e químicos requerem solvent
Cienc. Rural. Publicado em: 10/07/2019
-
2. Microstructure evolution during the extrusion of a 6351 aluminum alloy tube
Abstract The aluminum alloy AA 6351 is a precipitation hardened alloy of the Al-Mg-Si system, additionally containing Mn and Fe. In this study, the microstructural characterization during processing of a thick wall extruded AA 6351 tube was carried out. Several complementary techniques for microstructural characterization were used, such as polarized light o
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
3. Effect of Extrusion and Heat Treatment on Microstructure and Mechanical Properties of Hypereutectic A390-0.3wt%Nd Alloy
An hypereutectic aluminium alloy with a composition of 16-18wt%Si, 4-5wt%Cu, 0.45-0.65wt%Mg, 0.3wt%Nd and Al balance (A390-0.3wt%Nd alloy) was processed by extrusion and aging at 200ºC for 10 hours. The effect of the thermomechanical processing and heat treatment on microstructure and mechanical properties was investigated for A390-0.3wt%Nd alloy. It was sh
Mat. Res.. Publicado em: 10/06/2019
-
4. Compatibility and characterization of Bio-PE/PCL blends
Abstract In this work, blends based on environmentally friend polymers such as Biopolyethylene (Bio-PE), Polycaprolactone (PCL) and Polyethylene graft maleic anhydride (PEgMA) added as compatibilizer agent were produced by conventional extrusion, aiming to produce bio-blends with synergic properties at low processing cost, being at same time non-polluting an
Polímeros. Publicado em: 10/06/2019
-
5. Estudio de la formabilidad en caliente de aleaciones de titanio a través del ensayo de torsión y su aplicación a la optimización de procesos de forja y extrusión
ABSTRACT In the development of hot metal forming, the metallic products must comply with the requirements imposed by current standards. In some cases, the required microstructure can only be obtained through thermomechanical processing. With titanium and its alloys, small ranges of good workability are an additional difficulty. In this work the hot-workabili
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Correlation between Processing, Morphology and Impact Resistance of PBT/ABS Blends
To understand the processing influence in an intermeshing corotating twin-screw extrusion (ICTSE) on the morphology and impact properties of the uncompatibilized PBT/ABS (70/30) blend, it was submitted to different processing parameters. In this way both morphology and impact properties (resistance and ductile brittle transition temperature (DBTT) would be a
Mat. Res.. Publicado em: 30/10/2017
-
7. Thermal and Mechanical Properties of Vinyltrimethoxysilane (VTMOS) Crosslinked High Molecular Weight Polyethylene (HMWPE)
The use of polyethylene in sliding systems for automotive industry requires adequate mechanical properties, such as high wear resistance, besides good processing properties in conventional extrusion processes. Aiming to fulfill these requirements, crosslinks were introduced in a high molecular weight polyethylene (HMWPE) grade through a process involving gra
Mat. Res.. Publicado em: 27/07/2017
-
8. Oat fibers modification by reactive extrusion with alkaline hydrogen peroxide
Abstract The modification of lignocellulosic fibers can enhance their interaction with other materials and alkaline hydrogen peroxide (AHP) is a reagent widely used to promote such modification. This work aimed to modify oat hulls fibers by reactive extrusion using AHP (7 g 100 g-1 of hulls). The modified oat hulls displayed performances comparable to those
Polímeros. Publicado em: 08/12/2016
-
9. Thermal Stabilization study of polyacrylonitrile fiber obtained by extrusion
A low cost and environmental friendly extrusion process of the Polyacrylonitrile (PAN) polymer was viabilized by using the 1,2,3-propanetriol (glycerol) as a plasticizer. The characterization of the fibers obtained by this process was the object of study in the present work. The PAN fibers were heat treated in the range of 200 °C to 300 °C, which is the te
Polímeros. Publicado em: 2015-12
-
10. Evaluation of the influence of the use of waste from the processing of rice in physicochemical properties and biodegradability of PHB in composites
The high calorific value of rice husks has elevated its reuse as an energy source; however, the burning of these shells generates a waste ash from rice husk ash (RHA), which makes its disposal a concern. Despite advances, biodegradable polymers are not yet able to compete with those of traditional thermoplastics, which have lower production cost and higher p
Polímeros. Publicado em: 2014-12
-
11. Natural additives for poly (hydroxybutyrate - CO - hydroxyvalerate) - PHBV: effect on mechanical properties and biodegradation
In this work, the improvement of mechanical properties in biodegradable materials was obtained through the incorporation of natural and also biodegradable plasticizers and nucleation agents into the PHBV copolymer. PHBV production with different quantities of additives was obtained by extrusion followed by injection. The additives in the copolymer were effic
Mat. Res.. Publicado em: 21/10/2014
-
12. ECAE processed NiTi shape memory alloy
The current work evaluated the microstructures and martensitic transformation temperatures of NiTi shape memory alloy (SMA) deformed by equal channel angular extrusion (ECAE). The Ti-55.27wt.%Ni alloy was processed by 1 ECAE pass at 250 °C using a die with an intersection angle of 120°. After processing, samples were annealed at 300 °C, 400 °C and 500 °
Mat. Res.. Publicado em: 25/03/2014