Extraction Of Heavy
Mostrando 1-12 de 88 artigos, teses e dissertações.
-
1. The Stabilization of Asphaltenes in Different Crude Fractions: A Molecular Approach
The conditions of petroleum extraction may allow asphaltenes to precipitate, causing deposition that clogs wells, pipes and equipment, consequently reducing productivity. In this work, the solubility parameters and precipitation onset of polar fractions of heavy crudes from Brazilian fields were estimated using a simplified system of n-heptane/toluene mixtur
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
2. Zeolite-SPION Nanocomposite for Ammonium and Heavy Metals Removal from Wastewater
Minimizing the emission of industrial effluents and realizing the recovery/extraction of key elements such as the rare earths from low concentration solutions, or during water decontamination processes, are some of the biggest challenges of modern society. Accordingly, the preparation and characterization of a low cost recyclable and reusable superparamagnet
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
3. Potentially toxic metals in lotic systems with aptitude for aquaculture at the watershed Mantaro River, Peru
Resumo O objetivo do estudo foi analisar as concentrações de Cu, Zn, Fe, Pb e As em rios de águas com aptidão para a aquicultura na bacia do rio Mantaro utilizando métodos estatísticos multivariados, no período 2011-2013. A determinação do total de metais pesados em água coletada durante dois períodos climáticos contrastantes foi realizada por es
Rev. Ambient. Água. Publicado em: 11/02/2019
-
4. Comparing Methods for Extracting Heavy Metals from Histosols for Establishing Quality Reference Values
ABSTRACT The diversity of methods for heavy metal extraction from soils complicates comparison of results used by environmental agencies to establish quality reference values. The aim of this study was to evaluate three soil digestion methods regarding the solubilizing capacity of Ba, Cr, Cu, Fe, Mn, Ni, Pb and Zn, and to propose a standard method to establi
Rev. Bras. Ciênc. Solo. Publicado em: 03/11/2016
-
5. Evaluación De La Influencia De Las Condiciones De Fondo De Pozo En El Deterioro De Un Acero API P110, En Ambientes Simulados Del Proceso De Combustión In Situ, Por Gravimetría Y EIS
ABSTRACT Given the large amount of consumption of oil as an energy source, is resulting in a diminution in the existing world oil, the exploitation of heavy oil emerges as new alternative extraction is left aside because of the difficulties associated to processing. Therefore the in situ combustion process is an extraction method that facilitates production
Matéria (Rio J.). Publicado em: 2016-09
-
6. Pine Harvest Impact on Soil Structure of a Dystric Cambisol (Humic)
ABSTRACT Traffic of heavy machinery at harvest and log extraction causes structural degradation of the soil, but studies on the effects of forest harvesting on soils with high organic matter content and exchangeable Al are scarce. The objective of this study was to evaluate the effect of mechanized forest harvesting operations on a Dystric Cambisol (Humic) w
Rev. Bras. Ciênc. Solo. Publicado em: 23/06/2016
-
7. Modelling of Lead Migration from Electronic Waste to Mixtures of Kaolinite, Iron Oxides and Organic Matter
Improper disposal of electronic waste in the environment facilitates migration of heavy metals, especially lead, into the soil and can contribute to the bioavailability of this species. Based on a simplex-centroid mixture experimental design, small-scale tests were performed for incubation of printed circuit boards (PCBs) in mixtures containing organic matte
J. Braz. Chem. Soc.. Publicado em: 2016-05
-
8. Separation of rare earths by solvent extraction using DEHPA
Abstract This paper presents results or the analysis of process variables for separating light REE and heavy REE, in chloride media, by solvent extraction. DEHPAIsoparaffin was used as the extraction system and the liquor was produced in the laboratory by dissolving REE oxides in HCl to simulate leaching liquor originating from monazitic ores after cerium re
Rem: Rev. Esc. Minas. Publicado em: 2015-12
-
9. Polyphenolic resin synthesis: optimizing plantain peel biomass as heavy metal adsorbent
AbstractPolyphenolic resol resins were obtained from an ethanolic extraction of green plantain peels (Musa paradisiaca) grown in Colombia. A synthesis was then performed by polycondensation in an alkaline pH solution in order to perform research on phenolic resin production with high mechanical performance. The polymers were characterized by DSC and TGA anal
Polímeros. Publicado em: 2015-08
-
10. Feasibility of RF Sputtering and PIIID for production of thin films from red mud
During the extraction of aluminum from bauxite, a waste of oxides containing traces of heavy metals in a highly alkaline matrix, called Red Mud (RM), is produced. In this study RM is characterized and the feasibility of using it as a precursor for the production of thin films by Plasma Sputtering and by Plasma Immersion Ion Implantation and Deposition (PIIID
Mat. Res.. Publicado em: 26/10/2014
-
11. Rehabilitation with forage grasses of an area degraded by urban solid waste deposits
Dry matter yield and chemical composition of forage grasses harvested from an area degraded by urban solid waste deposits were evaluated. A split-plot scheme in a randomized block design with four replicates was used, with five grasses in the plots and three harvests in the subplots. The mineral content and extraction and heavy metal concentration were evalu
Revista Brasileira de Zootecnia. Publicado em: 2012-01
-
12. Desenvolvimento de uma unidade virtual para desasfaltação de resíduos pesados de petróleo para maximização de óleo desasfaltado e daí óleo lubrificante / Virtual unity development of heavy petroleum residues deasphalting to maximize the deasphalted oil production, and consequently, the lubricant oil production
O aumento mundial na demanda de energia e o descobrimento de óleo pesado e viscoso por parte da PETROBRAS nos últimos anos têm incrementado o desenvolvimento de novas tecnologias no Brasil para o processamento deste tipo de petróleo, assim como a adequação dos processos já existentes nas refinarias, visando atingir os requerimentos do mercado ao se ob
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 02/03/2011