External Layer
Mostrando 1-12 de 243 artigos, teses e dissertações.
-
1. Morphological aspects and embryonic development after the dispersion of pirenes of Ilex paraguariensis A. St. Hil
ABSTRACT The objective of this work was to identify and describe the morphological aspects of the pyrene and the different stages of developing embryos of Ilex paraguariensis. The pyrenes were collected in the year 2016 and 2017, of ripe fruits. The pyrenes, a total of 400 per site and year of collection, remained for 24 h immersed in water for the section a
Revista Ceres. Publicado em: 2022
-
2. A METHODOLOGY TO OBTAIN ANALYTICAL MODELS THAT REDUCE THE COMPUTATIONAL COMPLEXITY FACED IN REAL TIME IMPLEMENTATION OF NMPC CONTROLLERS
Abstract Model Predictive Control, MPC and NMPC, and real-time optimization, RTO and D-RTO, are known to help plant operability through the mitigation of impacts caused by external disturbances. However, the usage of these tools in industry requires overcoming some challenges, for instance: accurate models of the process, particularly in regard to nonlineari
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
3. Improvement of the viability of probiotics (Lactobacillus acidophilus) by multilayer encapsulation
RESUMO: O objetivo deste trabalho foi produzir microcápsulas de pectina, contendo Lactobacillus acidophilus por gelificação iônica externa, seguida da adsorção de proteína de soro de leite e multicamadas formadoras de pectina. Além disso, a viabilidade de lactobacilos livres e microencapsulados, após exposição in vitro a condições gastrintestin
Cienc. Rural. Publicado em: 19/08/2019
-
4. Three-Dimensional Reciprocal Invisibility Cloak with Multilayered Structure
Abstract We investigate a three-dimensional (3D) reciprocal invisibility cloak with a multilayered structure based on coordinate transformation theory and complementary media. There has been considerable research on invisibility cloaks such as the external cloak, which requires complex “anti-objects”, and closed cloaks of different shapes, in which the o
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
5. An Amorphous Silicon Photo TFT with Si3N4/Al2O3 or HfO2 Double Layered Insulator for Digital Imaging Applications
Abstract This paper focuses on amorphous silicon photo thin-film transistors with double layered insulator using Si3N4/Al2O3 or HfO2 as candidates for the succession of Si3N4 as a traditional insulator in the fabrication of hydrogenated amorphous silicon thin-film transistors. Whether for industry or for research, there is a need to investigate the use of th
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2019-03
-
6. Study of the Corrosive Behavior of the AISI 1020 Steel in Acid Crude Oil by Microscopic Techniques (LM, AFM and SEM/EDX) and Raman Spectroscopy
Microscopic techniques were combined to study the influence of corrosion rate on the morphologic behavior of AISI 1020 steel specimens submitted to thermal degradation of a typical acid crude oil (total acid number (TAN) = 2.1390 mg KOH g-1 and total sulfur (S) = 0.7778 wt.%). The techniques used were light microscopy (LM), scanning electron microscopy/energ
J. Braz. Chem. Soc.. Publicado em: 2018-08
-
7. Estudio ab initio de propiedades electrónicas y estructurales de nanopartículas de SnO2 bajo presión
ABSTRACT Tin oxide (SnO2) has important applications, including as an elective material in the development of gas sensors. These devices improve their sensitivity and decrease their work temperature when the nanoparticle size is in the nanoscale order. Therefore, the gas sensor raises its efficiency noticeably. For this reason, the research of behavior at th
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. Floral resins of Philodendron adamantinum (Araceae): secretion, release and synchrony with pollinators
ABSTRACT Philodendron is the only genus of Araceae in which resin release occurs in the inflorescence. The resinous secretion adheres to the smooth body surface of the pollinating scarab beetles and allows attachment of pollen grains, making its transport possible. In order to understand the process of resin synthesis and release to the external environment,
Acta Bot. Bras.. Publicado em: 04/06/2018
-
9. Physical-Chemical Characteristics of Designer and Conventional Eggs
ABSTRACT The objective of this study was to compare the internal and external quality of conventional and designer eggs. In total, 120 Tetra SL laying hens were randomly allotted to two treatments (K and P groups), with 12 replicates of five hens each. The control group (K) was fed a standard layer diet, producing conventional eggs, and the P group was fed a
Rev. Bras. Cienc. Avic.. Publicado em: 2018-03
-
10. Potassium adsorption in soil cultivated with sugarcane
ABSTRACT Vinasse is a byproduct of the process of distillation of sugarcane juice for the manufacture of sugar and alcohol. Because it is rich in nutrients, mainly potassium (K), is used as fertilizer and applied via fertigation, without concerning for the fate of this compound in the soil. Thus, the objective of the study was to evaluate the interactions of
An. Acad. Bras. Ciênc.. Publicado em: 16/10/2017
-
11. SmartCoM: Smart Consumption Management Architecture for Providing a User-Friendly Smart Home based on Metering and Computational Intelligence
Abstract With advances in information technology for health and wellness, Smart Home-based solution providers using Internet of Things (IoT) technologies, have increased in importance and become accepted as an alternative means of saving energy when based on Home Energy Management Systems (HEMS). This paper defines a modern architecture (SmartCoM), which is
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-09
-
12. Soil Compressibility under Irrigated Perennial and Annual Crops in a Semi-Arid Environment
ABSTRACT In irrigated soils, a continuous state of high moisture reduces resistance of the soil to applied external forces, favouring compaction. The aim of this study was to evaluate the susceptibility to compaction of developed calcareous soils in irrigated annual and perennial cropping systems of the Apodi Plateau, located in the Brazilian semi-arid regio
Rev. Bras. Ciênc. Solo. Publicado em: 20/07/2017