Evaporation Of The Air
Mostrando 1-12 de 40 artigos, teses e dissertações.
-
1. Experimentation and modeling of soil evaporation in underground dam in a semiarid region
RESUMO Nas regiões semi-áridas, as altas taxas de evaporação interferem na disponibilidade de água no solo. Normalmente, é difícil medir e modelar a evaporação devido à complexidade dos métodos disponíveis, ao baixo teor de umidade do solo e à baixa concentração de vapor de água no ar. Isso também pode dificultar o monitoramento e a simula�
RBRH. Publicado em: 14/02/2019
-
2. An experimental simulation model for coated paper drying
Due to the lack of information regarding the phenomena of mass, heat, and momentum transfer in coated paper drying, substantial research work still needs to be done. A simulation model for coated paper drying is introduced which integrates heat and mass transfer mechanisms. In the model, the coated paper was assumed to have 3 layers (coated layer, wet and dr
Braz. J. Chem. Eng.. Publicado em: 2013-09
-
3. Experimental Valuation Diagnostics of Hydrous Ethanol Sprays Formed by a Blurry Injector
ABSTRACT: Concerns about the rising fuel price and environmental changes have led to the search for alternative fuels and energy sources. The interest in improving the performance of power generation, with the aim of reducing costs, increasing operating efficiency, and reducing the emissions of pollutants, has driven the scientific community to work on new b
J. Aerosp. Technol. Manag.. Publicado em: 2013-06
-
4. Automatização de um pulverizador hidropneumático visando o controle do espectro de gotas em função do déficit de pressão de vapor dágua do ar / Automation of a hydro-pneumatic sprayer for controlling droplet spectrum in function of deficit of water vapor pressure in the air
Pesticide spraying is one of the most repeated operations in farms, this has occurred mainly due to adoption of no tillage. Facility for purchasing pesticides is notorious throughout Brazil. However, technology for its application has been difficult to reach the producers, even in regions with high agricultural potential. This work aimed to develop a system
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/04/2012
-
5. Gestão energética na pequena e média agroindústria - um enfoque térmico
The dissertation presents a way of developing an Energy Management Plan for small and medium agribusiness. The work brings the document "Energy Management Plan for Small and Medium Agribusiness," with an appropriate language to the end user, usually entrepreneurs with little specific knowledge on the subject. The plan presents tools and means to implement in
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/03/2012
-
6. Analysis of Gas Turbine Performance with Inlet Air Cooling Techniques Applied to Brazilian Sites
Abstract: For geographic regions where significant power demand and highest electricity prices occur during the warm months, a gas turbine inlet air cooling technique is a useful option for increasing output. Inlet air cooling increases the power output by taking advantage of the gas turbine's feature of higher mass flow rate, due the compressor inlet temper
J. Aerosp. Technol. Manag.. Publicado em: 2012-09
-
7. Bonding to dentin as a function of air-stream temperatures for solvent evaporation
This study evaluated the influence of solvent evaporation conditions of acid-etching adhesives. The medium dentin of thirty extracted human third molars was exposed and bonded to different types of etch-and-rinse adhesives: 1) Scotchbond Multi-Purpose (SBMP) ; water-based; 2) Adper Single Bond 2 (SB) ; ethanol/water-based, and 3) Prime & Bond 2.1 (PB) ; acet
Brazilian Oral Research. Publicado em: 2012-06
-
8. Proposta e comparação de um modelo fenomenológico com base em alto transporte de massa e supersaturação para torre de resfriamento de água. / Presentation and comparison of a model based in high mass transfer and supersaturation in a cooling water tower.
Cooling towers are equipment widely used in industrial plants, where these operate under severe conditions such as cooling water inlet temperatures above 50oC. Under this condition, there are high evaporation of water and high mass transfer, generally not considered in performance analysis of a cooling tower. This work presents and analyzes the differences b
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/12/2011
-
9. Análise das condições climáticas em 2000 na sub-região da Nhecolândia, Pantanal, Mato Grosso do Sul, Brasil.
Este trabalho teve como objetivo contribuir para o estudo das condições climáticas na sub-região da Nhecolândia, Pantanal/MS, organizando e difundindo informações climatológicas ocorridas durante o ano de 2000, comparando-as com a normal climatológica. Foi analisado o comportamento dos elementos climáticos no ano de 2000 em relação a "normal clim
Corumbá: Embrapa Pantanal. Publicado em: 2011
-
10. MudanÃas climÃticas e impactos na demanda de Ãgua para irrigaÃÃo na Bacia do Jaguaribe / Climate change and irrigation water demand impacts on Jaguaribe basin
Climate change has a potential to impact hydrological cycle processes such as rainfall that affects run off temperature and air humidity which are related to evaporation river flow and plant evapotranspiration They may also affect water availability and crop water requirement The purpose of this research was to assess climate change impacts on irrigation wat
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/12/2009
-
11. AnÃlise da utilizaÃÃo de gargalos e fios de garrada pet como enchimento de torres de resfriamento
In some industrial processes, as well as in air conditioning processes, there is the need for cooling of equipments that generate heat during his operation. Usually, the fluid utilized to dissipate that generated heat is the water, due to its physical characteristics (high heat capacity, low viscosity, high thermal conductivity and high density). Besides its
Publicado em: 2009
-
12. Estudo fluidodinâmico e térmico no transportador pneumático com alimentador tipo jorro
The pneumatic conveyor using a spouted bed as a particle feeding method has been studied in the past years in the Centro de Secagem/DEQ/UFSCar. In the literature there are some studies related to the fluid dynamics behavior of this type of conveyor, which can be found in the following works: Ferreira (1991); Ferreira e Freire (1992); Ferreira (1996), Silva (
Publicado em: 2009