Ethylene Glycol
Mostrando 1-12 de 446 artigos, teses e dissertações.
-
1. A Choline Chloride-Ethylene Glycol Deep Eutectic Solvent Based on Magnetic Polydopamine with Preconcentration and Determination for Sulfonylurea Herbicides in Water Samples
In this study, a novel deep eutectic solvent (DES) containing choline chloride and ethylene glycol was synthesized, and the magnetic polydopamine (PDA) was modified with this deep eutectic solvent to form Fe3O4@PDA-DES. Fourier transformed infrared spectroscopy, scanning electron microscopy, and vibrating sample magnetometer were used to characterize the pro
J. Braz. Chem. Soc.. Publicado em: 2020-07
-
2. Pyrolysis of the Caupi Bean Pod (Vigna unguiculata): Characterization of Biomass and Bio-Oil
The use of agricultural residues for the production of bio-oil is an important alternative to the use of fossil fuels. In this study, the Caupi bean pod (Vigna unguiculata) was characterized and used as biomass in the production of bio-oil. This biomass was evaluated in terms of physicochemical, morphological (scanning electron microscopy (SEM)), and thermal
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
3. Simultaneous use of oxalate-degrading bacteria and herbal extract to reduce the urinary oxalate in a rat model: A new strategy
ABSTRACT Objective: Urinary stones with oxalate composition can cause kidney failure. Recent findings evidenced that probiotics are effective in reducing oxalate absorption in these subjects based on their high colonic absorption levels at baseline. The purpose of this study was to evaluate the effect of the simultaneous use of oxalate-degrading bacteria, U
Int. braz j urol.. Publicado em: 20/12/2019
-
4. Preparation and properties of α-tricalcium phosphate microspheres by spray drying
Resumo Microesferas de α-TCP foram obtidas atomizando uma suspensão aquosa contendo 50% em massa de α-TCP com baixa cristalinidade e 1% em massa de ácido cítrico. Poli(etileno glicol) e poli(álcool vinílico) foram testados como ligantes. O processo de spray drying resultou em microesferas com diâmetros médios de aproximadamente 20 μm e esfericidade
Cerâmica. Publicado em: 14/11/2019
-
5. A FAIR COMPARISON BETWEEN BISMUTH CATALYSTS FOR APPLICATION IN PHOTODEGRADATION UNDER VISIBLE AND SOLAR LIGHT
ABSTRACT Three different bismuth catalysts (Bi2WO6, BiOI and BiVO4) were synthesized using solvo- and hydrothermal methods. Different reaction times, calcination and the addition of poly (vinyl pyrrolidone) during synthesis were tested to investigate the effect of these variables on the catalysts’ morphology and photocatalytic activity. The photocatalytic
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
6. Synthesis and characterization of amphiphilic block copolymers by transesterification for nanoparticle production
Abstract Poly(ε-caprolactone)-block-poly(ethylene glycol)-poly(ε-caprolactone) (PCL-PEG-PCL, triblock) and Poly(ε-caprolactone)-block-(poly(ethylene oxide)−poly(propylene oxide)−poly(ethylene oxide)-poly (ε-caprolactone) (PCL-PEO-PPO-PEO-PCL, pentablock) copolymers were synthesized by transesterification with reduction of PCL molecular mass, enabling
Polímeros. Publicado em: 04/07/2019
-
7. Preparation and physicochemical characterization of prazosin conjugated PLGA nanoparticles for drug delivery of flutamide
In the current work, a sustained drug delivery system of flutamide (FLT) was developed using Poly(D,L-lactide-co-glycolide) (PLGA) decorated bypoly(ethylene glycol) (PEG) grafted prazosin (PLGA-PEG-Praz) as a targeting moiety. In a multi-step reaction, PLGA was linked to PEG and prazosin. The structure of the synthesized polymers was confirmed by FTIR and 1H
Braz. J. Pharm. Sci.. Publicado em: 08/04/2019
-
8. Application of a Novel Ion-Imprinted Polymer to the Separation of Traces of CdII Ions in Natural Water: Optimization by Box-Behnken Design
This study describes the preparation of a novel ion-imprinted polymer (IIP) to apply pre-concentration of cadmium ions in water samples of the Pontal Bay in Ilhéus, Brazil. First, cadmium ion was complexed with 2-(2-thiazolylazo)-p-cresol (TAC). Subsequently, there was the polymerization using ethylene glycol dimethacrylate and methacrylic acid monomers alo
J. Braz. Chem. Soc.. Publicado em: 2019-04
-
9. Ecophysiology of Germination of Parkia platycephala Benth. Seeds
ABSTRACT Water is considered the most important environmental resource for the germination process. This study aimed to evaluate the germination performance of Parkia platycephala seeds under different conditions of water and saline stress. Seed germination was tested with solutions of poly (ethylene glycol) 6000 and sodium chloride (NaCl) at seven osmotic
Floresta Ambient.. Publicado em: 14/03/2019
-
10. PET glycolysis optimization using ionic liquid [Bmin]ZnCl3 as catalyst and kinetic evaluation
Abstract In the present work, the depolymerization of polyethylene terephthalate (PET) was performed by the method of glycolysis with ethylene glycol. The process was carried out using a factorial design in the Box-Behnken optimization model, using a response surface methodology (RSM) in which three factors (time, temperature and mass ratio of ethylene glyc
Polímeros. Publicado em: 29/11/2018
-
11. Use of Infrared Spectroscopy and Near Infrared Hyperspectral Images to Evaluate Effects of Different Chemical Agents on PET Bottle Surface
PET - poly (ethylene terephthalate) - bottle surfaces were exposed to chemical agents and evaluated with middle infrared spectroscopy (MIR) and near infrared hyperspectral imaging (HSI-NIR). Images (928-2.524 nm) were acquired at different times from bottle surfaces exposed to alkaline, acidic and ethanolic media. Savitzky-Golay smoothing (2nd order polynomi
Mat. Res.. Publicado em: 09/08/2018
-
12. Influencia de los tratamientos térmicos en recubrimientos anódicos nanotubulares de TiO2
ABSTRACT TiO2 is a semiconductor widely used in heterogeneous photocatalysis processes for water decontamination. Several studies indicate that ordered nanostructures in anatase phase improve the photocatalytic properties with respect to other morphologies and crystal structures of TiO2. The aim of the present work is to evaluate the influence of different t
Matéria (Rio J.). Publicado em: 19/07/2018