Ethyl Methacrylate
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. Light curing resin cements containing iodonium salts promote suitable apical bonding of posts to radicular dentin
Abstract The aim of this study was to analyze the efficiency of experimental light-curing resin cements (ERCs) with a ternary photo-initiator system containing diphenyliodonium hexafluorphosphate (DPI) and different amines on retention of glass-fiber posts to dentin (GFP). ERCs formulations: a 1:1 mass ratio of 2,2-bis[4-(2-hydroxy-3-methacryloxypropoxy)phen
Braz. oral res.. Publicado em: 14/11/2018
-
2. Synthesis of poly(ethyl methacrylate-co-methyl methacrylate) obtained via ATRP using ruthenium benzylidene complexes
Abstract Atom-Transfer Radical Copolymerization (ATRP) of methyl methacrylate (MMA) and ethyl methacrylate (EMA) under different reaction conditions was conducted using Grubbs 1st ( 1) and 2nd (2) generation catalysts. Initially, the study focused on the reactivity of the catalysts in ATRP of EMA individually, then the syntheses of poly(MMA-co-EMA) were als
Polímeros. Publicado em: 10/07/2018
-
3. A Microrheological Study of Poly(Methyl Methacrylate) Elastomer/Poly(Ethylene Terephthalate) (PMMAelast/PET) Blends
This study involved an evaluation of the influence of phase inversion in poly(methyl methacrylate) elastomer/poly(ethylene terephthalate) binary blends (PMMAelast/PET) and the effect of the addition of poly(methyl methacrylate-glycidyl methacrylate-ethyl acrylate) (MGE) interfacial compatibilizer on the microrheological properties of this polymer blend. Ther
Mat. Res.. Publicado em: 30/11/2017
-
4. Efficiency of Single Site Phase Transfer Catalyst in Free Radical Polymerization of Butyl Methacrylate - A Kinetic Study
ABSTRACT The effectiveness of single site phase transfer catalyst- 2- benzoylethyldecyldimethylammonium bromide has been studied with the help of kinetics of free radical polymerization of butyl methacrylate. The radical polymerization was catalysed with single site phase transfer catalyst, initiated by water soluble potassium peroxydisulphate initiator in e
Braz. arch. biol. technol.. Publicado em: 23/01/2017
-
5. Poly(dimethylsiloxane) and Poly[vinyltrimethoxysilane-co-2-(dimethylamino)ethyl methacrylate] Based Cross-Linked Organic-Inorganic Hybrid Adsorbent for Copper(II) Removal from Aqueous Solutions
An organic-inorganic hybrid adsorbent was prepared and its application for the uptake of CuII ions from aqueous solutions was studied. The polymer network was composed of poly(dimethylsiloxane) (PDMS), vinyltrimethoxysilane (VTMS), and 2-(dimethylamino)ethyl methacrylate (DMAEMA), described as PDMS-net-P(VTMS-co-DMAEMA). The chemical groups, thermal stabilit
J. Braz. Chem. Soc.. Publicado em: 2016-12
-
6. Synthesis and Characterization of New Copolymer Based Cinnamyl Methacrylate Monomer: Determination of Monomer Reactivity Ratio and Statistical Sequence
AbstractRadical-initiated copolymerization of Cinnamyl methacrylate (CMA) and Ethyl methacrylate (EMA) monomers were carried out at lower conversions (<10%) using 2,2’-azobisisobutyronitrile (AIBN) as initiator, in 1,4-dioxane at 60 °C and nitrogen atmosphere. Structure and composition of copolymers for wide range of monomer feed were determined by Fourie
Mat. Res.. Publicado em: 2015-10
-
7. Rheological, mechanical and morphological properties of poly(methyl methacrylate)/poly(ethylene terephthalate) blend with dual reactive interfacial compatibilization
Abstract In this work, the rheological, mechanical and morphological behavior of immiscible blend poly (methyl methacrylate) with elastomeric particles (PMMAelast) and post-consumer poly (ethylene terephthalate) (PET) with and without the use of the interfacial compatibilizer poly (methyl methacrylate-co-glycidyl methacrylate-co-ethyl acrylate) (MGE) was stu
Polímeros. Publicado em: 2015-10
-
8. Polyurethane/Poly(2-(Diethyl Amino)Ethyl Methacrylate) blend for drug delivery applications
AbstractA pH-sensitive blend of polyurethane (PU) and poly(2-(diethyl amino)ethyl methacrylate (PDEA) with good film-forming capacity was prepared from the corresponding aqueous dispersions. The polymer matrix was first characterized by using FTIR, DSC, water vapor transmission and water swelling capacity at different pHs. The drug release profile of films w
Polímeros. Publicado em: 2015-08
-
9. Simultaneous dehydration and infiltration with (2-hydroxyethyl)-methacrylate (HEMA) for lipid preservation in plant tissues
Although this study aims to develop an improved method for the preservation of reserve lipids in plant tissues for different uses in plant anatomy, it mostly aims to develop an improved method for the identification of lipid reserves where synthesis or storage occurs. The proposed procedures entail only the utilization of (2-hydroxyethyl)-methacrylate (HEMA)
Acta Bot. Bras.. Publicado em: 2015-06
-
10. Synthesis of stimuli-sensitive copolymers by RAFT polymerization: potential candidates as drug delivery systems
Poly(2-(dimethylamino)ethylmethacrylate-b-methymethacrylate) (PDMAEMA-b-PMMA) poly(2-(dimethylamino)ethylmethacrylate-b-vinylcaprolactam-b-(2-(dimethylamino)ethyl methacrylate) (PDMAEMA-b-PVCL-b-PDMAEMA) and poly(vinylcaprolactam-b-(2-(dimethylamino)ethylmethacrylate-b-vinylcaprolactam) (PVCL-b-PDMAEMA-b-PVCL) block copolymers were obtained by reversible add
Mat. Res.. Publicado em: 25/03/2014
-
11. Discrepancies in degree of conversion measurements by FTIR
The purpose of this study was to evaluate the influence of the internal standard peak on the measured degree of conversion (DC) for methacrylate-based resins analyzed by Fourier-transform infrared spectroscopy (FTIR). The influence of different baseline measurement methods was also determined. Different blends were prepared, mixing BisGMA/BisEMA and BisGMA/T
Braz. oral res.. Publicado em: 2014
-
12. The effect of extrusion conditions and the use of a compatibilizer in the crystallization of PBT/ABS blends
Poly(butylene terephthalate) (PBT)/ acrylonitrile-butadiene-styrene (ABS) terpolymer blends were prepared in a twin screw extruder and the use of methyl methacrylate-glycidyl methacrylate-ethyl acrylate (MGE) terpolymer as compatibilization additive was evaluated. The effect of different screw profiles and mixing conditions were evaluated on the crystallizat
Mat. Res.. Publicado em: 29/07/2013