Etching
Mostrando 13-24 de 424 artigos, teses e dissertações.
-
13. Análise de interfaces de sistemas restauradores diretos em esmalte e em dentina humanos
RESUMO O presente estudo visou caracterizar a interface entre resina e substrato dentário submetida aos processos restauradores convencional e autocondicionante, levando a observar a presença de gaps e infiltração dos sistemas adesivos nos substratos dentários. A análise foi realizada em dois substratos dentários: o esmalte e a dentina. Seis dentes h�
Matéria (Rio J.). Publicado em: 16/09/2019
-
14. Comparison of shear bond strength of orthodontic brackets bonded with a universal adhesive using different etching methods
RESUMO Objetivo: o objetivo desse estudo foi comparar os efeitos de três métodos de condicionamento do esmalte - condicionamento a laser, autocondicionamento e condicionamento ácido (5, 10 e 15 segundos) - sobre a colagem de braquetes com um adesivo universal. Métodos: oitenta e quatro pré-molares superiores foram divididos aleatoriamente em sete grup
Dental Press J. Orthod.. Publicado em: 05/09/2019
-
15. Superhydrophobic silicon fabricated by phosphomolybdic acid-assisted electrochemical etching
Controllable geometry silicon surfaces with superhydrophobicity are difficult to be fabricated without photolithography techniques. Superhydrophobic silicon surfaces with water contact angle larger than 150º and sliding angle less than 10º have been successfully fabricated by electrochemical etching strategy. Squarelike hole arrays with controllable geomet
Quím. Nova. Publicado em: 26/08/2019
-
16. Six-month performance of restorations produced with the ethanol-wet-bonding technique: a randomized trial
Abstract This double-blind randomized controlled clinical trial evaluated the effectiveness of dentin pretreatment with 100% ethanol (EWBT – ethanol wet bonding technique) and different adhesive protocols in noncarious cervical lesions (NCCL) after 6 months. Patients presenting at least one NCCL were included. NCCLs (n=148) were randomly assigned to 4 grou
Braz. oral res.. Publicado em: 01/07/2019
-
17. Bond strength and marginal microleakage in restorations photopolymerized with LED and halogen light associated with three application modes of a universal adhesive system: in vitro study
RESUMO Objetivo: Avaliar a resistência de união e microinfiltração marginal em restaurações de resina composta, utilizando sistema adesivo Single Bond Universal associado com fotoativadores Ultralux (halógeno) e Bluephase (LED). Métodos: Para resistência de união, oitenta terceiros molares humanos hígidos foram divididos: Halógena (n=40); LED (
RGO, Rev. Gaúch. Odontol.. Publicado em: 13/06/2019
-
18. Electrolytic polishing of compacted graphite iron for revealing subsurface graphite of honed cylinders
ABSTRACT The superficial characteristics of honed surfaces are relevant for the tribological performance of cylinders of internal combustion engines (MCI). Recent studies found a correlation between the occurrence of the phenomenon called folded metal and the presence of graphite of cast irons. However, the honing process tends to overlap the graphite, such
Matéria (Rio J.). Publicado em: 20/05/2019
-
19. Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics
Abstract: The objective of this study was to evaluate the effect of the hydrofluoridric acid (HF) concentration and time of acid conditioning on bond strength of three glass ceramics to a resin cement. Thus, fifty blocks (10 mm x 5 mm x 2 mm) of each ceramic (LDCAD: IPS e.max CAD; LCAD: IPS Empress CAD and LDHP: IPS e.max Press) were made and embedded in acr
Braz. oral res.. Publicado em: 16/05/2019
-
20. Twenty-four-month clinical performance of different universal adhesives in etch-and-rinse, selective etching and self-etch application modes in NCCL – a randomized controlled clinical trial
Abstract Objective The aim of this randomized, controlled, prospective clinical trial was to evaluate the performances of two different universal adhesives and one etch-rinse adhesive for restoration of non-carious cervical lesions (NCCLs). Material and Methods Twenty patients with at least seven NCCLs were enrolled. Lesions were divided into seven group
J. Appl. Oral Sci.. Publicado em: 11/04/2019
-
21. Effect of Self-Etching Primer Associated to Hydrofluoric acid or Silane on Bonding to Lithium Disilicate
Resumo Avaliar o efeito da combinação de ácido fluorídrico ou silano com o primer autocondicionante de cerâmicas sobre a eficácia da união imediata e após 1 ano de armazenamento em água, padrão de condicionamento e interação química desses tratamentos com o dissilicato de lítio. Um total de 16 blocos CAD/CAM de dissilicato de lítio (DL) foram
Braz. Dent. J.. Publicado em: 04/04/2019
-
22. Influência de tratamento dentinário com EDTA sobre a resistência de união de sistemas adesivos autocondicionantes
Resumo Introdução Os adesivos autocondicionantes apresentam técnica adesiva simplificada e diminuição na sensibilidade pós-operatória. Quando aplicados sobre a dentina, atuam sobre a smear layer, cuja efetiva remoção ainda constitui um desafio. Uma substância utilizada como pré-tratamento dentinário na ajuda da remoção da smear layer é o eti
Rev. odontol. UNESP. Publicado em: 11/03/2019
-
23. Doped Silicon Nanowires for Lithium Ion Battery Anodes
Nanostructured silicon (Si) has showed outstanding results as Li-ion battery anode material. Fabrication of nanostructured silicon anode materials is usually very complex, time consuming and expensive. In this work, silicon nanowires (SiNW`s) were produced by using rapid and uncostly metal catalyzed electroless etching (MCEE) method from various silicon wafe
Mat. Res.. Publicado em: 17/01/2019
-
24. Tooth whitening affects bond strength of adhesive systems in enamel
ABSTRACT This study presents how the tooth whitening affects the bond strength and fracture type of three distinct adhesives — a conventional, a self-etching, and a universal adhesive — in enamel. Health bovine incisors were prepared by flattening the labial surface; part of these teeth was submitted to whitening treatment with a peroxide-based product (
Matéria (Rio J.). Publicado em: 06/12/2018