Engineering Process Control
Mostrando 1-12 de 123 artigos, teses e dissertações.
-
1. EVOLUÇÃO DIRIGIDA DE ENZIMAS: PEQUENAS MODIFICAÇÕES, MELHORES BIOCATALISADORES
Biocatalysis is now a mature field, both in the laboratory and industrial scale. This approach counts on enzyme high selectivity, biodegradability, elegant control over the outcome of reaction conditions and as a possible solution to address some challenges in Green Chemistry faced by synthetic organic chemists. However, many wild-type ready-to-use enzymes w
Quím. Nova. Publicado em: 2020-06
-
2. STUDENTS BUILDING DIDACTIC EXPERIMENTS AS A TOOL FOR TEACHING UNIT OPERATIONS AND PROCESS CONTROL FOR CHEMISTRY TECHNICIANS
The qualified preparation of technician chemistry students who will act directly in the operation and control of industrial chemical plants is a permanent challenge in the teaching-learning process, since such activities require a broad view of the process and a sum of knowledge’s areas such as unit operations, instrumentation and industrial process contro
Quím. Nova. Publicado em: 21/10/2019
-
3. Tecnoperformance e instalação: possibilidades emergentes de produção artística com drones
RESUMO Neste artigo, apresentamos os processos de criação que deram origem à primeira tecnoperformance com drone, realizada no Grupo Internacional e Interinstitucional de Pesquisa em Convergências entre Arte, Ciência e Tecnologia (GIIP). Um voo, conduzido em tempo real, com base nos gestos faciais e movimentos de cabeça de uma artista com síndrome de
ARS (São Paulo). Publicado em: 02/05/2019
-
4. Differential expression of the genes involved in responses to water-deficit stress in peach trees cv. Chimarrita grafted onto two different rootstocks
ABSTRACT Water deficit is responsible for a negative impact on agricultural systems. Several physiological, biochemical, and molecular processes are initiated as a response to water-deficit stress. Quantifying the differential expression of the genes involved in the response to water-deficit stress plays a key role in the development of molecular strategies
Bragantia. Publicado em: 10/01/2019
-
5. Low cost system to measure active power in electrosurgical units
Abstract Introduction: The real-time measurement of active power delivered to patients during the electrosurgical act is still an engineering challenge. Besides, there is no electrosurgical unit on the market capable of doing it according to the normative requirement. Methods This work presents the design of an electronic structure capable to probe the ele
Res. Biomed. Eng.. Publicado em: 09/11/2017
-
6. Research on Phosphorus Removal in Artificial Wetlands by Plants and Their Photosynthesis
ABSTRACT Urban rainfall runoff pollution has become a major reason for water eutrophication problem in the process of urbanization in China, while phosphorus is a significant restrictive factor that influences primary productivity of freshwater system. It's rather significant to conduct phosphorus control in waste water with engineering measures. This resear
Braz. arch. biol. technol.. Publicado em: 20/10/2016
-
7. Design of a Nanosatellite Ground Monitoring and Control Software – a Case Study
ABSTRACT The growing countries that have carried out the development of CubeSat missions for academic purposes do not offer aerospace engineering programs at their universities. This causes difficulties for traditional engineers upon the formal use of different standards and frameworks for aerospace development, such as the European Cooperation for Space Sta
J. Aerosp. Technol. Manag.. Publicado em: 2016-06
-
8. CTLA4 enhances the osteogenic differentiation of allogeneic human mesenchymal stem cells in a model of immune activation
Allogeneic mesenchymal stem cells (allo-MSCs) have recently garnered increasing interest for their broad clinical therapy applications. Despite this, many studies have shown that allo-MSCs are associated with a high rate of graft rejection unless immunosuppressive therapy is administered to control allo-immune responses. Cytotoxic T-lymphocyte-associated pro
Braz J Med Biol Res. Publicado em: 19/05/2015
-
9. A new method for decision making in multi-objective optimization problems
Many engineering sectors are challenged by multi-objective optimization problems. Even if the idea behind these problems is simple and well established, the implementation of any procedure to solve them is not a trivial task. The use of evolutionary algorithms to find candidate solutions is widespread. Usually they supply a discrete picture of the non-domina
Pesqui. Oper.. Publicado em: 21/06/2012
-
10. Control of uncertainties within an interdisciplinary design approach of a robust high heel
Within this paper the combination of several methods, developed and used in Collaborative Research Center (CRC) 805 - "Control of Uncertainties in Load Carrying Systems in Mechanical Engineering" of the DFG (German Research Foundation), is used to demonstrate the development of a load carrying system under uncertainty. The development starts with the identif
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012
-
11. Análise numérica 3D do túnel auxiliar a jusante da UHE simplício-anta / 3D Numerical analysis of the tunnel downstream of the auxiliary
With the accelerated occupation of the space, the use of tunnels play an important role in engineering, in this sense, the deformations control during it s construction process is very important for the best performance of tunnels. In this sense the numerical analyzes represent a likely economy in the design process. This paper uses a theory of elasticity in
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/08/2011
-
12. Proposta de um método aberto de projeto de produto - três alternativas de criação. / Proposal for an open method of product design - three alternatives of creation.
Studies in the field of personalized thermal comfort demonstrate the necessity of developing an air distribution system that allows the user to control individually the thermal conditions in their work station. In this context, such an equipment is designed for guiding this study and this process has identified the need of devising a method of product develo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 11/05/2011