Engineering Inspection
Mostrando 1-12 de 21 artigos, teses e dissertações.
-
1. Avaliação da eficácia de sistema de ventilação local exaustora utilizado no controle de sílica cristalina em indústria de borracha de silicone
Resumo Introdução: os sistemas de ventilação local exaustora (SVLE) podem ser utilizados para controlar a exposição ocupacional a agentes químicos. Contudo, muitas vezes são indevidamente concebidos, instalados ou operados, tornando-se ineficazes. Objetivo: avaliar a eficácia de um SVLE empregado para controle da sílica cristalina utilizada na pr
Rev. bras. saúde ocup.. Publicado em: 25/02/2019
-
2. Simulação da propagação de ondas ultrassônicas longitudinais em materiais estruturais aeroespaciais / Simulating the propagation of longitudinal ultrasonic waves in aerospace structural materials
The use of composite materials in the aerospace industry is increasing due to its low ratio between density and mechanical strength. To perform non-destructive testing using ultrasound, it is necessary to know the sound velocity in these materials. It is not always possible to manufacture physical prototypes during the development of a project because of tim
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2012
-
3. Qualidade de artigos na wikipedia para seus usuários - análise e proposta de interação
Wikipedia has drawn much attention from scientists because of its bold proposal to create an open, collaborative encyclopedia, and even more for being so popular. Since the creation of Wikipedia in 2001 by Jimbo Wales and Larry Sanger, its growth hás been dizzying surpassing 2.5 million articles in English version. However, the use of such content faces the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/03/2011
-
4. Investigação sobre a aplicabilidade dos métodos de avaliação de comunicabilidade ao domínio educacional
More and more teachers have made use of technology as a tool to facilitate the process of teaching and learning. The increasing use of this technology in the classroom brings new challenges for the design and evaluation of educational environments, especially for the design of interfaces. Among these challenges is the need to assess learning by students, as
Publicado em: 2010
-
5. Estudo da causa de falhas dos aços inoxidáveis austeníticos utilizados em implantes ortopédicos
Given the variety of metallic materials used in orthopedic implants, the austenitic stainless steel type 316L and F138 have been widely used in Brazil as biocompatible material. Used by the public health, mainly due to it is low cost of manufacture compared to other materials, and because of the good combination of properties of which can be highlighted: The
Publicado em: 2010
-
6. Reliability prediction for structures under cyclic loads and recurring inspections
Abstract: This work presents a methodology for determining the reliability of fracture control plans for structures subjected to cyclic loads. It considers the variability of the parameters involved in the problem, such as initial flaw and crack growth curve. The probability of detection (POD) curve of the field non-destructive inspection method and the cond
J. Aerosp. Technol. Manag.. Publicado em: 2009-12
-
7. OBSTÁCULOS AO ENSINO DOS MÉTODOS DE AVALIAÇÃO DA ENGENHARIA SEMIÓTICA / OBSTACLES TO THE TEACHING OF THE SEMIOTIC ENGINEERING EVALUATION METHODS
This thesis presents the results of a qualitative research about the difficulties that are present in the teaching and learning process of two Human-Computer Interaction (HCI) evaluation methods. It concerns the Semiotic Inspection Method (SIM) and the Communicability Evaluation Method (CEM) both proposed by Semiotic Engineering to analyze the quality of the
Publicado em: 2009
-
8. CRISTA : um apoio computacional para atividades de inspeção e compreensão de código
Inspeção de software é uma atividade chave de garantia de qualidade de software que pode ser aplicada durante todo o processo de desenvolvimento uma vez que é uma atividade estática, baseada essencialmente em técnica de leitura. Dependendo do artefato inspecionado, é preciso aplicar a técnica apropriada. No caso de inspeção de código uma técnica
Publicado em: 2009
-
9. Análise quantitativa de modelos de prototipagem rápida baseados em dados de tomografia volumétrica, por meio de inspeção de engenharia reversa tridimensional / Quantitative analysis of rapid prototyping models based on datas of cone beam computerized tomography by inspection of three-dimensional reverse engineering
O objetivo neste estudo foi avaliar a reprodutibilidade quantitativa dos modelos tridimensionais gerados por meio de imagens de tomografia volumétrica de feixe cônico, obtidos por dois tomógrafos volumétricos NEWTOM 9000 DVT (i- (Quantitative Radiology, Verona, Itália) e i-CAT (Imaging Sciencies Int. Hatfield, Pensilvânia. Estados Unidos da América),
Publicado em: 2009
-
10. Nonlinear boundary element models to analyse fracture problems and reliability/optimization models applied to structures submitted to fatigue / Modelos não lineares do método dos elementos de contorno para análise de problemas de fratura e aplicação de modelos de confiabilidade e otimização em estruturas submetidas à fadiga
This work deals with the development of boundary element method (BEM) formulations to be used in engineering problems. Particular attention is given to using these formulations in development of reliability and optimization models applied to fatigue problems. Contributions to BEM formulations are developed, particularly, models that deal with crack growth in
Publicado em: 2009
-
11. ANÁLISE DO SENSOR DE UM PIG INSTRUMENTADO DO TIPO PALITO / ANALYSIS OF THE SENSING SYSTEM OF A FEELER PIG
Este trabalho apresenta a análise do sistema de medição utilizado pelo pig instrumentado tipo palito usado para detecção e dimensionamento de perda de espessura em dutos provocada por corrosão interna. A aplicação de testes experimentais de vibração, perfilagem geométrica e análise por elementos finitos têm objetivo de avaliar o sistema de medi�
Publicado em: 2009
-
12. Avaliação de estruturas de edifícios em concreto armado com vistas à reabilitação / Evaluation of building structures in concrete with a view to rehabilitation
With the growing number of serious problems found in the reinforced concrete structures, according to the research on damage done by Dal Molin in 1998 and Andrade 1997, there has been a growing demand for inspections and the maintenance of residential buildings both in Pernambuco and country as a whole. However, it is possible to observe that the practice of
Publicado em: 2008