Energy Production Characterization
Mostrando 1-12 de 108 artigos, teses e dissertações.
-
1. Technological properties of a self-bloating clay and expanded-clay aggregate for the production of lightweight concrete
Abstract The global interest in an increasingly sustainable economy, with a reduction in the consumption of raw materials and energy, can be supported by the growth in the use of lightweight concrete (LC) produced with expanded-clay aggregates (EA). The main qualities of natural self-bloating clay for the production of EA were studied, analyzing the paramete
Cerâmica. Publicado em: 2023
-
2. Lignocellulosic Residues from the Brazilian Juice Processing Industry as Novel Sustainable Sources for Bioenergy Production: Preliminary Assessment Using Physicochemical Characteristics
This work aims to investigate the energy-related characteristics of apple bagasse, orange bagasse and cashew-apple bagasse to identify their potential as bioenergy feedstocks. For this, a detailed characterization was performed, including proximate analysis, ultimate analysis, atomic molar ratio, heating values, chemical composition, bulk density, bioenergy
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
3. Cation Vacancies in NiFe2O4 During Heat Treatments at High Temperatures: Structural, Morphological and Magnetic Characterization
Nickel ferrite (NiFe2O4) was synthesized by mixing stoichiometric amounts of α-Fe2O3 and NiO using mechanical milling and heat treatments at high temperatures. The physical characterization of the samples was carried out using X-ray diffraction, infrared and Raman spectroscopies, Mössbauer spectrometry, magnetization measurements, scanning electron microsc
Mat. Res.. Publicado em: 20/12/2019
-
4. BRIQUETTES QUALITY PRODUCED WITH THE MACAUBA EPICARP (Acrocomia aculeata) AND Pinus sp. WOOD
RESUMO A macaúba (Acrocomia aculeata) é uma palmeira oleaginosa de alto valor econômico pela sua grande produtividade e pelas amplas possibilidades de aproveitamento das diferentes partes da planta. Esta palmeira é uma das espécies mais promissoras para a produção de biodiesel, e, durante o seu uso, há geração de grande quantidade de resíduos. O o
Rev. Árvore. Publicado em: 25/11/2019
-
5. Impactos Socioeconômicos, Ambientais e Tecnológicos Causados pela Instalação dos Parques Eólicos no Ceará
Resumo O Estado do Ceará se destaca no processo de produção de energia proveniente dos ventos por possuir posição geográfica privilegiada na geração de energia eólica. Esse trabalho consiste em apresentar os impactos ambientais, sociais, econômicos e tecnológicos originados com a implantação e operação das Usinas Eólicas no litoral cearense a
Rev. bras. meteorol.. Publicado em: 21/10/2019
-
6. Consumption and Characterization of Forestry Biomass Used in Tobacco Cure Process
ABSTRACT The tobacco production requires annually a large volume of firewood used in the cure process of tobacco leaves, representing up to 10% of its production cost. An alternative is the use of agroindustry residues, such as sawdust or pellets. The objective of this study was to analyze the consumption and to characterize forestry biomass used in the toba
Floresta Ambient.. Publicado em: 23/09/2019
-
7. Elementary, Chemical and Energy Characterization of “Dendê” (Elaeis guineensis Jacq.) Waste in the State of Pará
ABSTRACT This work aimed to chemically and energetically characterize palm waste in the municipality of Igarapé Açú-PA. The residue was crushed, sieved and acclimated up to 12% of humidity. Chemical analyses were performed in the fresh material, according to NBR standards. Part of the residue was transformed into charcoal at 450 °C, with heating rate of
Floresta Ambient.. Publicado em: 23/09/2019
-
8. Production and Characterization of the Bio-Oil Obtained by the Fast Pyrolysis of Spent Coffee Grounds of the Soluble Coffee Industry
Agro-industrial wastes are abundant and low-cost sources of energy and chemicals. Biomass account for 14% of the world’s energy production. Industrial residues of production of soluble coffee (spent coffee grounds - SCG) have great potential due to its large-scale production and can be transformed by pyrolysis, in liquid, solid and gaseous products with ap
J. Braz. Chem. Soc.. Publicado em: 12/08/2019
-
9. ASSESSMENT OF POLYHYDROXYALKANOATE SYNTHESIS IN SUBMERGED CULTIVATION OF Cupriavidus necator AND Burkholderia cepacia STRAINS USING SOYBEAN AS SUBSTRATE
ABSTRACT Polyhydroxyalkanoates (PHA) are biocompatible and biodegradable polyesters produced by prokaryotic microbes for energy storage and carbon reserve. These polymers are an option to diminish the massive impact caused by inadequate disposal of synthetic plastics. In this study, evaluation and characterization of PHA produced by Cupriavidus necator (IPT
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
10. Argamassas eco-eficientes com incorporação simultânea de material de mudança de fase e cinzas volantes
RESUMO Atualmente, a indústria da construção é um dos principais setores europeus responsáveis pelos elevados níveis de consumo de energia, extração de matérias-primas e produção de resíduos. Cada vez mais o consumo de energia proveniente de fontes renováveis e a reutilização de resíduos industriais constituem a única maneira de minimizar es
Matéria (Rio J.). Publicado em: 10/06/2019
-
11. Efeito da adição de resíduos da construção e demolição (RCD) nas propriedades hidromecânicas de um solo areno-argiloso
RESUMO Diante de uma produção cada vez mais evidente dos resíduos sólidos resultantes das ações humanas, tais como os Resíduos da Construção e Demolição (RCD), destinar adequadamente estes materiais tem ganho importância no cenário atual, pois quando dispostos irregularmente atuam de forma degradante sobre o meio ambiente e contribuem com a prol
Matéria (Rio J.). Publicado em: 10/06/2019
-
12. Chemical characterization of archaeological pottery of the Lower Paraná River
Resumo Este artigo analisou a composição mineralógica da cerâmica arqueológica produzida por populações de caçadores-coletores e horticultores do Holoceno tardio na parte baixa da bacia do Paraná. Para analisar a composição química dos fragmentos foi utilizado um espectrômetro de fluorescência de raios X de energia dispersiva. Os resultados obt
Cerâmica. Publicado em: 06/06/2019