Energy Optimization
Mostrando 1-12 de 314 artigos, teses e dissertações.
-
1. Iron Cobaltite (FeCo2O4) Nanocatalysts for Water-Oxidation: Effects of Annealing Temperature on Catalytic Properties
The development of efficient, stable, and non-precious metal water oxidation catalysts (WOCs) is a matter of importance for sustainable energy research. In this work, iron cobaltite (FeCo2O4) nanoparticles were prepared by the coprecipitation method, and we present the effect of heat treatment (250, 350, 450, 650 and 900 °C) on the catalytic properties. Cat
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Development of a Simple and Fast Procedure Based on Acid Dilution for Determination of Macro and Microelements in Guarana-Based Beverages by ICP OES
A simple analytical procedure is proposed for the direct analysis of guarana-based beverages in order to determine nutrient elements by inductively coupled plasma optical emission spectrometry (ICP OES). A Box-Behnken design, combined with Derringer’s desirability function, was applied to the simultaneous optimization of the ICP OES radiofrequency (RF), sa
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
3. Study using a CFD approach of the efficiency of a roof ventilation closure system in a multi-tunnel greenhouse for nighttime microclimate optimization
ABSTRACT The thermal efficiency of naturally ventilated greenhouses is limited due to the permanent exchange of air through the vents, especially during the night hours. The objective of the work consisted in evaluating a system of inflatable air ducts that close the roof vents during the night as a strategy to reduce the energy loss during these hours. For
Rev. Ceres. Publicado em: 2020-10
-
4. Analysis and Optimization of Ultra-Low-Power Rectifier with High Efficiency for Applications in Wireless Power Transmission and Energy Harvesting
Abstract The system capable of harvesting RF energy from the environment through an antenna and converting it into direct current energy to deliver to a load is known as rectenna. The rectifier circuit is an important part of the rectenna and its modeling is arduous since it employs a non-linear device working at extremely low power levels. In addition, ther
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-03
-
5. INNOVATION SYSTEM IN AIR TRANSPORT MANAGEMENT
Abstract Identifying previous research subjects on innovation management in air transport provides not only updated references on new technologies in this industry, but also indicates which areas need to be prioritized in future research. A systematic literature review of publications in this field over the past decade, from 2005 to 2015, including 2016 publ
JISTEM J.Inf.Syst. Technol. Manag.. Publicado em: 02/12/2019
-
6. Numerical modeling for the urban drainage gallery systems design
RESUMO Considerando as frequentes inundações dos centros urbanos, as limitações financeiras e a gestão ineficiente dos sistemas de Drenagem Urbana (DU) dos municípios brasileiros, é necessário que projetos sejam desenvolvidos com eficiência e economia. Estes objetivos são alcançados com a correta definição do diâmetro nominal e da declividade d
RBRH. Publicado em: 14/11/2019
-
7. DESAFIO NA ESCOLHA DOS SOLVENTES EM SÍNTESE - O WORKUP COMO EXEMPLO
A procedure for the assessment and optimization of the greenness of solvents in synthesis was developed. It involves two optimization components, aiming at the optimization of both the intrinsic greenness of the solvents and their efficiency to improve the overall green performance of the synthesis, evaluated with mass, energy and time greenness metrics. The
Quím. Nova. Publicado em: 21/10/2019
-
8. Development of a method for simultaneous analysis of caffeine and taurine in energy drinks by micellar electrokinetic chromatography with diode-array detector
Abstract The objective of this study was to develop, optimize and validate a fast and reliable method for the simultaneous determination of caffeine and taurine contents by micellar electrokinetic chromatography with diode array detector, using direct and indirect detection concomitantly. Multivariate statistical techniques were used as a central composite d
Food Sci. Technol. Publicado em: 16/09/2019
-
9. Chemosensor Development of Cu2+ Recognition Using 1,5-Diphenylthiocarbazone: Optimization, COSMO-RS and DFT Studies
The sensitive and selective chemosensor for copper(II) ions (Cu2+) was successfully optimized using the 1,5-diphenylthiocarbazone (DPT) compound. The result showed that dimethyl sulfoxide (DMSO) in a 9:1 (DMSO:water) ratio at a pH of 3 was the optimum medium for DPT to act as chemosensor of Cu2+ recognition. The DPT chemosensor did not encounter any interfer
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
10. Review: deformation and optimisation crashworthiness method for foam filled structures
Abstract In this paper, we give overview of deformation modes for the uniform foam filled thin-walled structure such as circular tubes, square tubes, rectangular tubes, tapered tubes, hat tubes and cone tubes. Foam material is used as a reinforcing material on a thin wall tube which has potential as being a good energy absorber. This is evident from many of
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
11. Bacaba powder produced in spouted bed: an alternative source of bioactive compounds and energy food product
Resumo Este estudo avaliou o pó de bacaba produzido em leito de jorro como fonte de compostos bioativos e de alto valor energético. As condições que influenciaram os parâmetros do processo de secagem (desempenho, teor de umidade, retenção fenólica e de antocianina), bem como a otimização simultânea (condições ótimas) de produção foram conside
Braz. J. Food Technol.. Publicado em: 15/08/2019
-
12. RELIABILITY-BASED MULTI-OBJECTIVE OPTIMIZATION APPLIED TO CHEMICAL ENGINEERING DESIGN
ABSTRACT Chemical engineering optimization represents a significant challenge due to the complexity of the mathematical models that are frequently required in this area. These models are normally associated with nonlinear equations that represent mass, energy, and momentum balances, which are submitted to physical, constitutive, environmental, and design lim
Braz. J. Chem. Eng.. Publicado em: 15/07/2019