Energy Input
Mostrando 1-12 de 182 artigos, teses e dissertações.
-
1. Passively Q-Switched Pulses Generation from Erbium-Doped Fiber Laser Using Lutetium Oxide as Saturable Absorber
Abstract In this paper, a configuration of a passive Q-switched Erbium-doped fiber laser (EDFL) using a Lutetium Oxide (Lu2O3) thin film as a saturable absorber (SA) is experimentally implemented to generate high pulse energy with a high signal to noise ratio. A stable Q-switched pulse train is initiated at the input pump power of 30.442mW, and a maximum pul
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
2. DESIGN AND IMPLEMENTATION OF FLC APPLIED TO A SMART GREENHOUSE
ABSTRACT Greenhouse cultivation needs an accurate modelling and an optimised control system to ensure an adequate microclimatic condition for plants. It represents a complex task due to the high number of input factors. For this reason, an improved intermediate modelling was established under the platform of the MATLAB/Simulink environment to simulate the en
Eng. Agríc.. Publicado em: 2020-12
-
3. Performance evaluation of GSA, SOS, ABC and ANN algorithms on linear and quadratic modelling of eggplant drying kinetic
Abstract In this study, kinetics of eggplant drying was modeled in the laboratory-scaled Food Drying Oven (FDO) with resistance heater was designed and manufactured. The temperature, energy consumption and drying time of FDO were recorded by keeping the temperature of at different temperatures as 40, 50 and 60 °C. These saved values were chosen as the input
Food Sci. Technol. Publicado em: 2020-09
-
4. Analysis and Optimization of Ultra-Low-Power Rectifier with High Efficiency for Applications in Wireless Power Transmission and Energy Harvesting
Abstract The system capable of harvesting RF energy from the environment through an antenna and converting it into direct current energy to deliver to a load is known as rectenna. The rectifier circuit is an important part of the rectenna and its modeling is arduous since it employs a non-linear device working at extremely low power levels. In addition, ther
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-03
-
5. Hydroelectric Generators Competing in Cascades*
Abstract Hydroelectric generation is the main source of energy production in many countries. When firms operate in the same river, or in cascades, the output of an upstream firm is the input of its downstream rival. We build a dynamic stochastic duopoly model of competition in cascades and show that the decentralized market is inefficient when rain is freque
Rev. Bras. Econ.. Publicado em: 01/01/2020
-
6. Performance evaluation of GSA, SOS, ABC and ANN algorithms on linear and quadratic modelling of eggplant drying kinetic
Abstract In this study, kinetics of eggplant drying was modeled in the laboratory-scaled Food Drying Oven (FDO) with resistance heater was designed and manufactured. The temperature, energy consumption and drying time of FDO were recorded by keeping the temperature of at different temperatures as 40, 50 and 60 °C. These saved values were chosen as the input
Food Sci. Technol. Publicado em: 20/12/2019
-
7. K-NEAREST NEIGHBORS METHOD FOR PREDICTION OF FUEL CONSUMPTION IN TRACTOR-CHISEL PLOW SYSTEMS
ABSTRACT Most important farm operations require a significant amount of energy, and this consumes a major portion of the farm's budget. Consequently, analyzing the fuel consumption of agricultural machinery for farm operations of different sizes makes it possible to predict fuel consumption to set an appropriate budget for energy. The main purpose of this st
Eng. Agríc.. Publicado em: 09/12/2019
-
8. Uma Nota Sobre Consumo Energético, Emissões, Renda e Emprego na Cadeia de Soja no Brasil
Resumo Este artigo, com base na desagregação das matrizes energéticas de 2000 a 2014, compatíveis com as matrizes insumo-produto do Brasil, aponta que a Cadeia Soja no agronegócio responde por 12,70% do PIB, 12,10% dos empregos, 9,80% do consumo de energia e 8,70% das emissões de CO2. Verificou-se, uma mudança estrutural pautada pela expansão do prod
Rev. Bras. Econ.. Publicado em: 25/11/2019
-
9. Simulação computacional de dispositivos de mistura em câmara de combustão para gases de carbonização
Resumo O carvão vegetal proveniente de florestas plantadas é uma fonte de energia renovável utilizada na siderurgia do Brasil, todavia, em sua produção há liberação do gás de pirólise, que pode ser considerado um gás com baixo poder calorífico inferior. A sustentabilidade da produção de carvão vegetal tem demandado a queima destes gases, poden
Ciênc. Florest.. Publicado em: 30/09/2019
-
10. Avaliação da susceptibilidade de precipitação da fase sigma na soldagem do aço inoxidável duplex SAF2205
RESUMO A soldagem de aços inoxidáveis duplex é uma operação crítica, devido aos ciclos térmicos aos quais o material é submetido, que podem favorecer a precipitação de fases deletérias. Nesse contexto, objetivo dessa pesquisa é analisar a influência da energia de soldagem na susceptibilidade à formação de fase sigma no aço duplex SAF2205. As
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Energy and budget balances for sweet potato-based ethanol production
Resumo: O objetivo deste trabalho foi avaliar a viabilidade da batata-doce (Ipomoea batatas) para produção de etanol, bem como estimar os balanços energético e econômico para a cultura. Foram avaliados dados das fases agrícola e industrial de produção. Os da fase agrícola foram estimados a partir de experimento conduzido em campo e usados para compa
Pesq. agropec. bras.. Publicado em: 19/08/2019
-
12. Evaluation of the energy extraction of a small-scale wave energy converter
RESUMO Este trabalho tem foco em propostas que podem incentivar o desenvolvimento de dispositivos integrados de pequena escala para atender o desafio global de fornecer energia elétrica a partir de fontes alternativas sem maiores intervenções. O artigo apresenta a avaliação de um dispositivo de extração de energia das ondas em pequena escala que pode
RBRH. Publicado em: 04/04/2019