Energy Formation
Mostrando 1-12 de 1331 artigos, teses e dissertações.
-
1. Study of rhombohedral tricalcium phosphate in hexagonal crystal structure family on the sample prepared by the sol-gel route and the effect of calcination temperature
Abstract The effect of the calcination temperature at 800 and 1000 °C on the stable formation of the tricalcium phosphate with rhombohedral structure in the system of the hexagonal crystal family was determined, while its precursor was made from limestone obtained from nature in the Lumajang district, Indonesia. The rhombohedral tricalcium phosphate samples
Cerâmica. Publicado em: 2023
-
2. Tuning the Photocatalytic Activity of Tin Oxide through Mechanical Surface Activation
Tin oxide (SnO2) nanoparticles were synthesized by the co-precipitation method and mechanically modified by high-energy ball milling. The experimental results demonstrate that the collision with zirconia balls produces slight changes in the crystalline, electronic, morphological, and surface properties of SnO2, which lead to an increase in the redox potentia
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Thermophysical and Transport Properties of the BaCl2-CsCl High Temperature Ionic Liquid Mixtures
High temperature ionic liquids (HTILs) densities and transport properties for mixtures BaCl2 CsCl, x(BaCl2) = 0-1, have been studied as a function of composition and temperature. In terms of Arrhenius theory, the temperature correlation of all measured properties was made and discussed. Thermodynamic properties (isothermal compressibility, molecular volume,
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
4. Evaluation of the Current in the Cell Membrane for Numerical Simulations of Electroporation
Abstract This study presents a rigorous numerical analysis of the current in the cell membrane, subjected to a uniform electric field, and its impact in the pore formation. The numerical model considers a single cell composed of uniform membrane and cytoplasm, in a suspension medium. The current in the cell membrane is calculated using two different approach
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
5. Phase transformation of kaolinite to hexagonal kalsilite using K2CO3
Abstract Hydrothermal synthesis of kalsilite was facilitated by the inclusion of potassium carbonate (K2CO3) as the source of the potassium ion. After a 24 h reaction at 220 °C, kaolin clay treated with 1.25 M K2CO3 showed the most significant peaks at 2θ of 28.5° and 34.7° by X-ray diffraction corresponding to the hexagonal kalsilite. In addition, field
Cerâmica. Publicado em: 2022
-
6. VIBRATION CHARACTERISTICS, CHEMICAL BONDS AND WEAK INTERACTIONS OF 4- AND 5-HYDROXYSALICYLIC ACID INVESTIGATED BY TERAHERTZ SPECTROSCOPY AND DENSITY FUNCTIONAL THEORY
The terahertz (THz) absorption spectra of 4- and 5-hydroxysalicylic acid were measured by terahertz time-domain spectroscopy (THz-TDS) in the range of 0.4-2.8 THz. The unit cells of both were calculated by density functional theory (DFT), and the theoretical simulation and experimental data were basically in agreement. To further interpret the origin of the
Química Nova. Publicado em: 2022
-
7. The Influence of the Platinum Weight Percentage in the Catalyst Formulation on the Performance of a High Temperature Ethanol Electroreformer Based on H3PO4 Doped Polybenzimidazole for Green Hydrogen Production
A vapor-fed high temperature proton exchange ethanol electroreformer has been developed based on the use of a H3PO4-doped polybenzimidazole membrane to produce green hydrogen. As a key parameter, this article describes the influence of platinum weight percent (wt.%) in the catalyst formulation from different commercial catalysts (20, 40, 60, 80 wt.% Pt/C and
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
8. Iron Cobaltite (FeCo2O4) Nanocatalysts for Water-Oxidation: Effects of Annealing Temperature on Catalytic Properties
The development of efficient, stable, and non-precious metal water oxidation catalysts (WOCs) is a matter of importance for sustainable energy research. In this work, iron cobaltite (FeCo2O4) nanoparticles were prepared by the coprecipitation method, and we present the effect of heat treatment (250, 350, 450, 650 and 900 °C) on the catalytic properties. Cat
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
9. Percutaneous and endoscopic combined treatment of bladder and renal lithiasis in mitrofanoff conduit
ABSTRACT Introduction and Objectives: Treatment of bulky lithiasis in continent and non-continent urine storage reservoirs has been widely described and debated (1). Less is known about the optimal treatment in patients with a Mitrofanoff conduit. If voiding in these patients is incomplete, leading to recurrent symptomatic bacteriuria, formation of large li
International braz j urol. Publicado em: 2022
-
10. Mathematical modeling of whey foam mat drying
ABSTRACT This study aimed to fit mathematical models to whey foam drying processes in different air temperature conditions, to determine the effective diffusion coefficient and to obtain the activation energy. For foam formation, 5.0% Emustab® was added to the serum in mass and subjected to stirring in a domestic shaker for 15 min. After, it was spread onto
Rev. Ceres. Publicado em: 2021-08
-
11. Green Synthesis of Upconverting NaYF4 and NaGdF4 Materials and Energy Levels Determination
An alternative green route using a domestic microwave oven to synthesize NaGdF4:Yb,Tm and NaYF4:Yb,Er was successfully developed. Decreasing dopants concentration increased the β-NaREF4/α-NaREF4 ratio in NaGdF4. The scanning electron microscopy (SEM) images of NaGdF4 showed particles ranging from 500 nm to 1 μm with formation of aggregates up to 100 μm,
J. Braz. Chem. Soc.. Publicado em: 2021-08
-
12. Sintering mechanisms of partially stabilized zirconia (TZ3Y) with ZnO and Co3O4 as sintering additives
Abstract In this work, the sintering mechanisms of 3 mol% yttria-stabilized zirconia (TZ3Y) and TZ3Y containing 0.3 wt% of ZnO or Co3O4 were analyzed by determining the apparent activation energy of sintering from dilatometry data and observing the evolution of microstructure. Dilatometry test was performed at a heating rate ranging from 5 to 20 °C/min from
Cerâmica. Publicado em: 2021-06