Energy Flow
Mostrando 1-12 de 725 artigos, teses e dissertações.
-
1. Numerical simulations of ceramic firing in catenary kilns
Abstract Kiln geometries were developed to reach homogeneous temperatures above 900 °C, during the firing process, aiming to improve the production process of the ceramists from Vale do Jequitinhonha (MG/Brazil). Techniques of reactive flow numerical solution using the software Ansys CFX have been used to foresee the behavior of the firings. Two types of ca
Cerâmica. Publicado em: 2022
-
2. RING CURRENT IN ANTHRACENE AND PHENANTHRENE: CORRECTION TO HÜCKEL PARAMETERS
Excessive degeneracy in the ground state of the π-electron energy levels of anthracene was removed using the Hückel method by correcting the Coulomb integral of the four central carbon atoms. A further correction to the resonance integral was proposed based on the ring-current model, which describes the π-ring current flow along the molecule’s perimeter
Química Nova. Publicado em: 2022
-
3. Evaluation of the Current in the Cell Membrane for Numerical Simulations of Electroporation
Abstract This study presents a rigorous numerical analysis of the current in the cell membrane, subjected to a uniform electric field, and its impact in the pore formation. The numerical model considers a single cell composed of uniform membrane and cytoplasm, in a suspension medium. The current in the cell membrane is calculated using two different approach
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. Steel desulfurization on RH degasser: physical and mathematical modeling
Abstract Due to the high-quality steel demand, especially for ultra-low Sulfur steel, RH desulfurization has been practiced. Based on this, mathematical and physical modeling have been applied to study steel desulfurization by reagent addition in the RH degasser vacuum chamber. The main result of cold modeling, using water and oil emulating steel and slag, r
REM - International Engineering Journal. Publicado em: 2022
-
5. A Parametric Study of Inductive SWIPT Systems Assisted by Metamaterial Using Virtual Magnetic TL-Based Channel Modeling
Abstract This paper presents a general methodology based on the description of the inductive channel as virtual magnetic transmission-lines (VMGTLs). In comparison with other existing methods, VMGTL approach presents a better physical insight of the channel behavior since the model correctly preserves the energy flow between the transmitting and receiving co
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
6. Strategies used to control the costs of underground ventilation in some Brazilian mines
Abstract In an underground mine, the ventilation is responsible for 25% to 50% of its electrical energy consumption. In countries such as South Africa, United States and Canada researchers have started to achieve a significant reduction in energy consumption without neglecting aspects of the quantity and quality of air required for the best performance of th
REM, Int. Eng. J.. Publicado em: 2020-12
-
7. INTERFERENCE OF THE NUMBER OF REMOTE CONTROL VALVES IN USE ON THE ENERGY PERFORMANCE OF AN AGRICULTURAL TRACTOR WITH PRODUCTIVITY MANAGEMENT
ABSTRACT The hydraulic remote control system allows the transfer of energy from the engine through a flow of hydraulic oil to engines and implements pulled by agricultural tractors, which can interfere with its energy and operational performance. This study aimed to evaluate the interference of the number of remote control valves in use on the operational an
Eng. Agríc.. Publicado em: 2020-06
-
8. ECONOMIC MANAGEMENT MODEL OF ELECTRICITY GENERATED FROM BIOMASS IN A PIG FARM
ABSTRACT Faced with the increasing demand for renewable energy, researchers have developed several ways to generate them, such as biogas. Thus, the present study aims to demonstrate the economic viability of electricity generation from biodigesters in a pig farm to contribute to sustainable development by reducing pollution in the environment. Studies focuse
Eng. Agríc.. Publicado em: 2020-04
-
9. Evaluation of a Graphite-Polyurethane Composite Electrode Modified with Copper Nanoparticles as an Amperometric Flow Detector in a Wall-Jet System for the Determination of Cysteine
A graphite-polyurethane composite electrode (GPUE) was modified by electrodeposition of copper nanoparticles (CuNP) followed by electrochemical treatment in NaOH (GPUE-CuNP), in order to prepare an amperometric sensor for the determination of cysteine (Cys). Cyclic votammograms of Cys solutions at GPUE-CuNP allowed the description of a sequence of electroche
J. Braz. Chem. Soc.. Publicado em: 2020-02
-
10. MODELING AND SIMULATION OF A VACUUM MEMBRANE DISTILLATION PLANT COUPLED WITH SOLAR ENERGY AND USING HELICAL HOLLOW FIBERS
Abstract This paper investigates the effect of operating conditions such as coil pitch, fiber diameter, distance between fiber and absorber internal wall and absorber diameter for a vacuum membrane installation coupled with solar energy and using helically coiled fiber to maximize the permeate flow rate. The model is based on a system of equations composed o
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
11. ENERGY AND EXERGETIC EVALUATION OF THE MULTICOMPONENT SEPARATION OF PETROCHEMICAL NAPHTHA IN FALLING FILM DISTILLATION COLUMNS
Abstract Multicomponent separation of synthetic petrochemical naphtha (hexane, cyclohexane, toluene and xylene) was carried out in a falling film distillation sequence with heat supply using a vapor chamber (thermosyphon). Tests were carried out by varying feed flow rate and temperatures of the feed and the vapor chamber in two ways of heat supply: isotherma
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
12. Land-use influence on the soil hydrology: An approach in upper Grande River basin, Southeast Brazil
RESUMO A Bacia do Alto Grande (ARG) é responsável pela drenagem de vários rios no sudeste do Brasil, sendo uma região hidrológica de grande importância para o Sistema Elétrico Brasileiro. Portanto, estudos sobre a disponibilidade de água nesta região são indispensáveis para uma melhor tomada de decisão na gestão dos recursos hídricos. O objetiv
Ciênc. agrotec.. Publicado em: 09/12/2019