Elemental Analysis Chn
Mostrando 1-12 de 26 artigos, teses e dissertações.
-
1. Tuning Emitting Color of Electroluminescent Devices Containing Tris(2-acyl-1,3-indandionate)aluminum(III) Complexes as Emitting Layers
In this study, a novel type of tris(2-acyl-1,3-indandione)-aluminum(III) coordination compounds of the general formula [Al(acind)3]H2O, where 2-acyl-1,3-indandione (acind), 2-acetyl-1,3-indandione (aind), 2-benzoyl-1,3-indandione (bind), and 4-methyl-2-benzoyl-1,3-indandione (mbind), were synthesized and characterized by elemental analysis (CHN), Fourier tra
J. Braz. Chem. Soc.. Publicado em: 12/08/2019
-
2. Human Hair as Adsorbent of Palladium(II) in Solution: A Precursor of Well-Dispersed Size-Controlled Pd Nanoparticles
This work describes, for the first time, the preparation of palladium nanoparticles supported in thermally-treated human hair. Human hair showed to be an efficient adsorbent of Pd2+ in aqueous media, reaching nearly 100% of adsorption from a 100 ppm solution. The thermal treatment of hair containing Pd2+ at 200 ºC under nitrogen atmosphere led to the format
J. Braz. Chem. Soc.. Publicado em: 2019-04
-
3. Surface modification of activated carbon by corona treatment
Surface modification may lead activated carbon (AC) to take on different properties. This study aimed to promote surface modification of activated carbons using corona treatment (electrical discharge). In this study, powdered commercial activated carbon was used. Activated carbons were subjected to corona treatment at different exposure times (2, 5, 8 and 10
An. Acad. Bras. Ciênc.. Publicado em: 21/03/2019
-
4. Phosphate Modification of Nano Titania and Its Effect on the Photodegradation of EDTA
The surface of nano titania was phosphate modified and characterized by X-ray diffraction (XRD), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), energy dispersive X-ray analysis (EDX), and elemental analysis (CHN) to show the existence of phosphate in the modified nano titania. The resultant phosphated nano titania was applie
J. Braz. Chem. Soc.. Publicado em: 2016-10
-
5. Cellulose Nanocrystals Assembled on the Fe3O4Surface as Precursor to Prepare Interfaced C/Fe3O4Composites for the Oxidation of Aqueous Sulfide
In this work, composites based on carbon (1, 10 and 20 wt.%) interfaced with Fe3O4 (magnetite) have been studied as catalysts for the oxidation of aqueous sulfide. The composites were prepared by assembling cellulose nanocrystals surrounding Fe3O4 followed by a controlled thermal decomposition at 400, 600 and 800 ºC. Mössbauer, X-ray diffractometry (XRD),
J. Braz. Chem. Soc.. Publicado em: 2016-02
-
6. COMPARISON BETWEEN ASPHALTENES (SUB)FRACTIONS EXTRACTED FROM TWO DIFFERENT ASPHALTIC RESIDUES: CHEMICAL CHARACTERIZATION AND PHASE BEHAVIOR
Asphaltenes are blamed for various problems in the petroleum industry, especially formation of solid deposits and stabilization of water-in-oil emulsions. Many studies have been conducted to characterize chemical structures of asphaltenes and assess their phase behavior in crude oil or in model-systems of asphaltenes extracted from oil or asphaltic residues
Quím. Nova. Publicado em: 2016-01
-
7. Low Temperature Synthesis of Luminescent RE2O3:Eu3+ Nanomaterials Using Trimellitic Acid Precursors
[RE(TLA)·(H2O)n:Eu3+] (RE3+: Y, Gd and Lu; TLA: trimellitic acid) precursor complexes were synthesized by an one step aqueous co-precipitation method. After annealing for 1 h, RE2O3:Eu3+ nanophosphors were formed through the benzenetricarboxylate low temperature thermolysis method (500-1000 ºC). The compounds were characterized by using different technique
J. Braz. Chem. Soc.. Publicado em: 2015-12
-
8. Use of Biodiesel Press Cake Waste to Prepare Fe/Carbon Reactive Composites for Environmental Applications: Removal of Hazardous CrVI Contaminants
In this work, Ricinus communis L. press cake waste from biodiesel production was used to produce a versatile reactive material for environmental applications. The biodiesel cake waste was impregnated with FeIII at different concentrations (19-45 wt.%) and treated at 400, 600 and 800 °C. Mössbauer, X-ray diffraction (XRD), thermogravimetric analysis (TG/DTA
J. Braz. Chem. Soc.. Publicado em: 2015-10
-
9. Surface Modification and Spectroscopic Characterization of TiO2 Nanoparticles with 2-Aminoethyl Dihydrogen Phosphate
A common strategy for the surface modification of nano TiO2 and other metal oxide nanoparticles is based on anchor groups using chelating ligands that can carry additional functionalities. This would allow the exploration of further applications of these materials. In the present work, we report the modification of TiO2 nanoparticles
J. Braz. Chem. Soc.. Publicado em: 2015-08
-
10. Inorganic-organic hybrids originating from organosilane anchored onto leached vermiculite
The reactivity of clay minerals leached in grafting reactions was investigated. Precursor solids were prepared by treating the sodium vermiculites with nitric acid solutions at several concentrations. The lixiviation produced the restructured porous solids with surface area over a wide range, varying from 133 to 673 m² g- 1. The sodium and lixiviated vermic
Mat. Res.. Publicado em: 21/05/2013
-
11. Novos complexos de Ru(II) e Mg(II) com flavonóides : atividade tóxica, sítios ativos e mecanismos de ação / New Complexes of Ru(II) and Mg(II) with flavonoids: toxic activity, active sites and mechanisms of action.
The use of pesticides in agriculture, in order to enhance and ensure food production for a growing population has led to many concerns about risks to human health and the environment. Therefore, search for new strategies which seek a safer alternative is very important. With this aim, herein we describe new ruthenium(II) and magnesium(II) complexes containin
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/11/2012
-
12. Caracterização química elementar e proteica da polpa de graviola / Elemental and protein determinations in graviola pulp
No presente trabalho foram desenvolvidos métodos para a determinação de Al, B, Ba, Ca, Co, Cu, Cr, Fe, K, Li, Mg, Mn, P, S, Si, Sn, Sr, Ti, V e Zn por espectrometria de emissão óptica com plasma indutivamente acoplado (ICP OES) e As, Cd, Pb e Se por espectrometria de absorção atômica com forno de grafite e detecção simultânea (SIMAAS) em polpa de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/04/2012